Which list of drives is used to generate /etc/smartd.conf?

    • OMV 2.x
    • Which list of drives is used to generate /etc/smartd.conf?

      Hi folks,

      at company we are running an omv 2.x with two RAIDs - one for fileserving, and one for system backups of all our pcs. For the latter I did some experiments with existing drives, before I ordered the final setup. Which is working perfectly so far.

      Only, as S.M.A.R.T. log tells, the experimental drives are not forgotten and tested every time, smartd is (re)started, which is daily, always throwing log entries about drives, that are not existing and not listed under /dev/disk/ no more. They are only still listed in /etc/smartd.conf, and, because that file is auto-generated by omv, the "normal" way to edit /etc/smartd.conf will not really help.

      So my question: Where is the list of drives, omv uses to generate /etc/smartd.conf, from which I can delete the drives that are not of interest no more?
      Private NAS: Intel S1200 Board + i3-3240 CPU + 4GB ECC RAM + LSI SAS2108 Controller in IT mode + 4x3TB SAS RAID5 + OMV 3 booting from single HQ SATA drive
      Private Backup: Zotac H61ITX Board + i3-3220T CPU + 4GB RAM + SATA Controller + 4x4TB RAID10 + OMV 4 booting from single SATA drive
      Enterprise NAS: Asus CS-B Board + i3-4330T CPU + 4GB ECC RAM + HP SC44Ge Controller + 3x3TB SATA RAID5 + 3x2TB SATA RAID5 + OMV 2.x booting from single SAS drive
    • Thank you!

      /etc/openmediavault/config.xml is what I was looking for.
      Private NAS: Intel S1200 Board + i3-3240 CPU + 4GB ECC RAM + LSI SAS2108 Controller in IT mode + 4x3TB SAS RAID5 + OMV 3 booting from single HQ SATA drive
      Private Backup: Zotac H61ITX Board + i3-3220T CPU + 4GB RAM + SATA Controller + 4x4TB RAID10 + OMV 4 booting from single SATA drive
      Enterprise NAS: Asus CS-B Board + i3-4330T CPU + 4GB ECC RAM + HP SC44Ge Controller + 3x3TB SATA RAID5 + 3x2TB SATA RAID5 + OMV 2.x booting from single SAS drive
    • Users Online 1

      1 Guest