Plex doesn't start after update

  • Hi,


    I'm new to OMV, and I'm encountering troubles after Plex's last update as it do not start.


    Here's what I get from the command line when I look at plexmediaserver status:


    I'm running OMV on a USB Key.


    Thanks

    • Offizieller Beitrag

    Did you update from the OMV update tab or Plex's update?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • I updated from the OMV update tab.


    Don't know wether it helps but I first installed plex with command line because I had trouble making update with OMV web UI.


    Each time I tried to update from 3.086 to to 3.088 I got disconnected from the web UI with a software failure message and had to reboot the nas. After that I had plenty of errors. I tried several times to reinstall OMV, changed the USB key, tried to update with command line it was always the same result. I finally installed OMV without making last updates and installed Plex with command line to avoid new errors. Everything was working fine until I updated Plex with the web UI.


    Envoyé de mon SM-G901F en utilisant Tapatalk

    • Offizieller Beitrag

    How exactly did you install it manually?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • To install OMVExtras:

    Code
    wget http://omv-extras.org/openmediavault-omvextrasorg_latest_all3.deb
    dpkg -i openmediavault-omvextrasorg_latest_all3.deb
    apt-get update


    To install plex

    Code
    apt-get install plexmediaserver
    • Offizieller Beitrag

    That wouldn't work since the plex repo isn't enabled by default. Did you enable it or add a repo?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    Not sure then. Installing the plugin doesn't install plex any differently.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    So what should I do next?

    Not sure. I don't use plex and when I try to install it, it just works.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • I am just guessing but are your permissions correct for the Plex user for your plex library folder? "/usr/lib/plex mediaserver/Plex Media Server"


    Also is the folder "/usr/lib/plex mediaserver/Plex Media Server" correct for your library?

  • I am just guessing but are your permissions correct for the Plex user for your plex library folder? "/usr/lib/plex mediaserver/Plex Media Server"


    Also is the folder "/usr/lib/plex mediaserver/Plex Media Server" correct for your library?

    maybe the update changed the permissions, why not?


    I had several troubles installing omv and trying to update (this never worked on my computer always had to reinstall), so I decided to change for Ubuntu Server.


    My main purpose is to have a reliable media server for my whole home, and for now it is running fine.


    I want to thank you both ryecoaaron and you for taking time to answer me.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!