Error "Failed to get the RPC parameters"

    • OMV 3.x
    • Error "Failed to get the RPC parameters"

      Hi guys,

      yesterday I installed OMV 3.0.86 on my machine and upgraded it to 3.0.88 several times. On version 3.0.86 as well as on 3.0.88 I continuously get errors "Failed to get the RPC parameters." First intention from my side was that I have some wrongly configured DNS-service running in my network but it turned out that I'm currently using the DNS-servers provided by my ISP only. So I don't get what might be the problem.

      Does anyone have some hints what I can do to identify the problem?

      Thanks in advance.
      "With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead." - RFC 1925 (3)
    • Please post the whole error message details. To get them click on the 'Details' button.
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Here we go:

      Source Code

      1. Fehler #0:
      2. exception 'OMV\Rpc\Proxy\Exception' with message 'Failed to get the RPC parameters.' in /usr/share/php/openmediavault/rpc/proxy/json.inc:47
      3. Stack trace:
      4. #0 /var/www/openmediavault/rpc.php(45): OMV\Rpc\Proxy\Json->handle()
      5. #1 {main}
      I just tried to observe if it is reproducible somehow but that error occurs sporadic after some minutes when using the surface.


      Addition:
      It turned out that the server responds with a HTTP-state 400 but still no joy in reproducing it constantly.
      "With sufficient thrust, pigs fly just fine. However, this is not necessarily a good idea. It is hard to be sure where they are going to land, and it could be dangerous sitting under them as they fly overhead." - RFC 1925 (3)

      The post was edited 1 time, last by Hansa ().