Hi
Installed OMV 3 on banana pi using the official image from here.
Used Etcher to burn the image to SD card.
After first boot up it says need to wait up to 15 minutes and the system will reboot. Been waiting up to 1 hour still no reboot. However logged into the GUI and rebooted from there just to be on the safe side.
Problem is the system SD card where OMV resides only has 2 small partitions
Looking at other peoples posts everyone seems to get 3 partitions. I'm not bothered about that but i want the use most of the 8GB sd card for the omv system files so i used the guide here to expand the 2nd partiton to get this shown by "fdisk -l"
/dev/mmcblk0p1 2048 133119 131072 64M 83 Linux
/dev/mmcblk0p2 133120 13000000 12866881 6.1G 83 Linux
Only part i couldn't get working was entering after a reboot the command
"sudo resize2fs /dev/mmcblk0p2" it came up with error
" Couldn't find valid filesystem superblock."
Is that because the filesystem is showing as btrfs format in the gui? Terminal ssh shows the above size but in the GUI it only shows 863Mb of which shows 95% usage already!
Also "df -h" shows
"/dev/mmcblk0p2 863M 683M 41M 95% /"
How can I Expand the filesystem to use all the space allocated to the second partition?
Also on a side question, how do you change the terminal ssh password from the default openmediavault?