OMV 2.2.13 installation messed up

Hi All,

I'm completely new here and searching for help :).
I'm running OMV quite a while now (+/- 3 years) and like it a lot.

Couple of months I ran intro troubles after a shutdown (my kid pressed the fancy blue led power button ).
Actualy never had time to fix the problems, whatever it was, because I movemoved to a temp home.. Now I moved to my new home, I turned on the NAS and it actualy worked again. The Web GUI appeared, SSH worked. I forwared the correct port so I was able to acces it from outside etc.

Until couple of days ago, it didn't respond anymore. I did changed some things in the network of my house, and did some updates (which I believe didn't actualy install).
Right now, it turns on. I can logon with root (attached a screen to my nas), but mostly none of the commands are working anymore. Not even omv-firstaid... Based on that I came across the threads below that I red and tried and didn't help.

No web interface after update - no omv-firstaid
http://forums.openmediavault.o…APT-Default-Release-as-s/

There is still some data on, which I'm not sure it's backuped. I thought I just run rsync and copy the data and completely reinstall OMV to the latest version. But even rsync returns "command not found".
But if I can't copy the data I want to try to fix this issue, to at least copy the data.

Output of uname -or is 3.2.0-4amd64 GNU/linux.

Anyone that can help me?

Regards,
Chris.

Hi Macom, thanks for your help.
There is no critical data on the system drive, I use an SSD only for the OS.
I've 3 x 4TB in raid 0.

So with an USB stick or just a hard disk I can try to install OMV again (latest version) and check if I can set it up correctly again.
After installation I connect the disks again?

If this all works ok, I can copy the installation from the temp drive to my original OS disk?

@macom, thanks for your help. I installed OMV to a simple USB stick, reconnected the drives and OMV recognizes the disks and the raid.
But before it was mounted in /media/mountname.. now it is: /srv/dev-disk-by-label-WD12TBRAID0

Can I change this back?

Thanks for the quick replies. Actually, it's not that important :).
If everythinh works fine again on the stick I'll install OMV again on my SSD.