Nach Neuinstallation ist Raid5 nicht mehr vorhanden

Hallo Zusammen,

ich habe mein Openmediavault neuinstalliert seit dem ist mein Raid5 weg.
Könnte mir jemand bitte mal die richtigen Schritte posten die man für einen Rebuild eingeben muss ohne das ich meine Daten verliere?

Vielen Dank schon mal.

cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
unused devices: <none>

blkid
/dev/sda1: UUID="205fa2e9-5e4a-4040-bcde-9375b7c1e496" TYPE="ext4" PARTUUID="d01c17b6-01"
/dev/sda5: UUID="6461da0d-1ec1-48e4-bea7-8564c674c904" TYPE="swap" PARTUUID="d01c17b6-05"
/dev/sde2: UUID="e54a1cc4-6baa-4487-b957-02e207c66c38" TYPE="swap" PARTUUID="000e273f-02"
/dev/sdd1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000938ae-01"
/dev/sdd3: UUID="25c82dbd-52a3-4ddd-909e-086087fdf1d3" EXT_JOURNAL="00000500-0000-0000-0000-00000020c51d" TYPE="ext4" PARTUUID="000938ae-03"
/dev/sdb1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000e4123-01"
/dev/sdb2: UUID="a38e1d0e-6f31-47ba-8c95-a15360cabdd7" TYPE="swap" PARTUUID="000e4123-02"
/dev/sdb3: UUID="247ebe0f-b285-b0ea-72b3-584665ba4b27" TYPE="linux_raid_member" PARTUUID="000e4123-03"
/dev/sdb4: UUID="797b32b1-ff92-48f7-96d5-1c289ef4d58d" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000e4123-04"
/dev/sdc1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="0000c25a-01"
/dev/sdc2: UUID="a38e1d0e-6f31-47ba-8c95-a15360cabdd7" TYPE="swap" PARTUUID="0000c25a-02"
/dev/sdc4: UUID="797b32b1-ff92-48f7-96d5-1c289ef4d58d" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="0000c25a-04"
/dev/sde1: PARTUUID="000e273f-01"
/dev/sde3: PARTUUID="000e273f-03"
/dev/sde4: PARTUUID="000e273f-04"
/dev/sdd2: PARTUUID="000938ae-02"
/dev/sdd4: PARTUUID="000938ae-04"
/dev/sdc3: PARTUUID="0000c25a-03"

fdisk -l | grep "Disk "
Disk /dev/sda: 29,8 GiB, 32017047552 bytes, 62533296 sectors
Disk identifier: 0xd01c17b6
Disk /dev/sde: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000e273f
Disk /dev/sdd: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000938ae
Disk /dev/sdb: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000e4123
Disk /dev/sdc: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x0000c25a

cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST <system>

# definitions of existing MD arrays

mdadm --detail --scan --verbose
root@nas02omv:~#

Raid 5 4x 2TB Samsung Red

Nach Neuinstallation

cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
unused devices: <none>

blkid
/dev/sda1: UUID="205fa2e9-5e4a-4040-bcde-9375b7c1e496" TYPE="ext4" PARTUUID="d01c17b6-01"
/dev/sda5: UUID="6461da0d-1ec1-48e4-bea7-8564c674c904" TYPE="swap" PARTUUID="d01c17b6-05"
/dev/sde2: UUID="e54a1cc4-6baa-4487-b957-02e207c66c38" TYPE="swap" PARTUUID="000e273f-02"
/dev/sdd1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000938ae-01"
/dev/sdd3: UUID="25c82dbd-52a3-4ddd-909e-086087fdf1d3" EXT_JOURNAL="00000500-0000-0000-0000-00000020c51d" TYPE="ext4" PARTUUID="000938ae-03"
/dev/sdb1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000e4123-01"
/dev/sdb2: UUID="a38e1d0e-6f31-47ba-8c95-a15360cabdd7" TYPE="swap" PARTUUID="000e4123-02"
/dev/sdb3: UUID="247ebe0f-b285-b0ea-72b3-584665ba4b27" TYPE="linux_raid_member" PARTUUID="000e4123-03"
/dev/sdb4: UUID="797b32b1-ff92-48f7-96d5-1c289ef4d58d" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="000e4123-04"
/dev/sdc1: UUID="87a170c0-9254-4aef-93ab-1243a3f1b917" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="0000c25a-01"
/dev/sdc2: UUID="a38e1d0e-6f31-47ba-8c95-a15360cabdd7" TYPE="swap" PARTUUID="0000c25a-02"
/dev/sdc4: UUID="797b32b1-ff92-48f7-96d5-1c289ef4d58d" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="0000c25a-04"
/dev/sde1: PARTUUID="000e273f-01"
/dev/sde3: PARTUUID="000e273f-03"
/dev/sde4: PARTUUID="000e273f-04"
/dev/sdd2: PARTUUID="000938ae-02"
/dev/sdd4: PARTUUID="000938ae-04"
/dev/sdc3: PARTUUID="0000c25a-03"

fdisk -l | grep "Disk "
Disk /dev/sda: 29,8 GiB, 32017047552 bytes, 62533296 sectors
Disk identifier: 0xd01c17b6
Disk /dev/sde: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000e273f
Disk /dev/sdd: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000938ae
Disk /dev/sdb: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x000e4123
Disk /dev/sdc: 1,8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x0000c25a

cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST <system>

# definitions of existing MD arrays

mdadm --detail --scan --verbose
root@nas02omv:~#

Raid 5 4x 2TB Samsung Red

Nach Neuinstallation

Hat sich erledigt danke für nichts