PlexConnect - PlexMediaServer to ATV3 without Jailbreak

  • Hi,


    Today a friend send me informations about a new system to use Plex on ATV3. ==> PlexConnect.


    10 seconds later, my openmediavault system was up and running to test it... and it works !!!


    This is still in beta for now.


    Needed :


    - Python 2.x
    - Git (optional => wget)
    - PlexMediaServer http://forums.openmediavault.o…hp?f=13&t=1203&hilit=plex
    - PlexConnect https://github.com/iBaa/PlexConnect


    What i've done (in root) (PlexMediaServer is already installed):


    Code
    apt-get install python git
    git clone https://github.com/iBaa/PlexConnect.git
    cd PlexConnect


    replace the ip adress (8.8.8.8) with my own DNS :


    Code
    nano Settings.py


    Restart to be sure..and finally :


    Code
    cd ~/PlexConnect
    ./PlexConnect.py


    The settings for the ATV3 can be found here : https://github.com/iBaa/PlexCo…ection-installation-guide


    For an OSX or Windows PlexMediaServer : https://github.com/iBaa/PlexConnect/wiki/Install-guides


    Probably not the best tutorial but I hope this can be useful.


    Sorry for my bad english.


    Dan

    • Offizieller Beitrag

    Funny. I just read that and was thinking it would be great to try on OMV :) Thanks for the info!

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • i have this running at startup, i use the following as /etc/init.d/plexconnect
    you will need to make sure the paths are correct for your install, and i had to install the screen application, I also set a cron job to run each minute to "Start" the plexconnect script not "Restart" and it works like dream
    i also ran update-rc.d /etc/init.d/plexconnect


  • Hi I'm trying to get it to start but I'm having some trouble.
    I have got it setup and running but I can not get it to autostart or start as a service.


    When I enter:
    service plexconnect start - it says it's starting but if I ask for the status it says "could not access the PID file"

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!