OMV / NAS Startup & boot without entering Logindata

    • OMV 3.x
    • Resolved

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • OMV / NAS Startup & boot without entering Logindata

      Good Morning,

      I have a Fujitsu Home Server using as my NAS with 4 internal HDD´s. On that PC I have no graphical output, but can add it by opening the housing and adding a PCI x1 card...

      But What I want is to start my NAS if required and don't want to type in my Login data by opening the hole case every time....

      Hope my Situation is clear and anyone can help me :)
      Intel® Celeron® 420 Prozessor (1.6 GHz, 512 KB, L2 Cache)
      2GB DDr2 RAM
      OMV 3.0.94
      2x 3TB Seagate
      1x 2TB Hitachi
      1x 250GB Samsung (Main System OMV )
    • if your problem is that OMV do not boot if no VGA is detected, add one VGA ( cheapest posible) and done.

      I start my OMV without any monitor attached to my NAS and boot fine, no need to log in to start anything, see my signature.

      Your problem appear to be a hardware problem not a OMV problem.
      OMV 3.0.96 x64 on a HP T510, 16GB CF as Boot Disk & 32GB SSD 2,5" disk for Data, 4 GB RAM, CPU VIA EDEN X2 U4200 is x64 at 1GHz

      Post: HPT510 SlimNAS ; HOWTO Install Pi-Hole ; HOWTO install MLDonkey ; HOHTO Install ZFS-Plugin ; OMV_OldGUI ; ShellinaBOX ;
      Dockers: MLDonkey ; PiHole ;

      The post was edited 1 time, last by raulfg3 ().

    • OMV / NAS Startup & boot without entering Logindata

      Do you know the service „ssh“?

      With ssh it’s possible to log into your nas from another computer/tablet in your local network. In most cases there is no need for physical access to the nas.

      Greetings Hoppel
      ---------------------------------------------------------------------------------------------------------------
      frontend software - android tv | libreelec | win10 | kodi krypton
      frontend hardware - nvidia shield tv | odroid c2 | yamaha rx-a1020 | quadral chromium style 5.1 | samsung le40-a789r2 | harmony smart control
      -------------------------------------------
      backend software - debian | kernel 4.4 lts | proxmox | openmediavault | zfs raid-z2 | docker | emby | vdr | vnsi | fhem
      backend hardware - supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x4tb wd red | digital devices max s8
      ---------------------------------------------------------------------------------------------------------------------------------------
    • Thanks both for your quick reply.

      Yes I know Ssh and using it since I have OMV.... shame on me .. I thought the NAS needs first to be logged in to work with SSH on another computer...

      Now everything is working and Topic can be closed :)
      Intel® Celeron® 420 Prozessor (1.6 GHz, 512 KB, L2 Cache)
      2GB DDr2 RAM
      OMV 3.0.94
      2x 3TB Seagate
      1x 2TB Hitachi
      1x 250GB Samsung (Main System OMV )
    • OMV / NAS Startup & boot without entering Logindata

      No, this is not possible.
      ---------------------------------------------------------------------------------------------------------------
      frontend software - android tv | libreelec | win10 | kodi krypton
      frontend hardware - nvidia shield tv | odroid c2 | yamaha rx-a1020 | quadral chromium style 5.1 | samsung le40-a789r2 | harmony smart control
      -------------------------------------------
      backend software - debian | kernel 4.4 lts | proxmox | openmediavault | zfs raid-z2 | docker | emby | vdr | vnsi | fhem
      backend hardware - supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x4tb wd red | digital devices max s8
      ---------------------------------------------------------------------------------------------------------------------------------------