OMV Extras (PlugIns) Datei läßt sich nicht hochladen

  • Hi Gemeinde,
    das zweite Problem nacc dem Upgrade von 2.0 auf 3.0: PlugIns-Datei läßt sich nicht importieren!


    Ich war auf http://omv-extras.org und habe die richtige Datei openmediavault-omvextrasorg_latest_all3.deb runtergeladen.
    Wenn ich dann über den Menüpunkt >Erweiterungen versuche, die Datei hochzuladen, wähle ich zunächst die Datei aus. Aber der Name der Datei bleibt nicht im Browse-Fenster. Es verschwindet sofort aus dem Fenster. KEIN Upload möglich.
    Auch der Versuch, eine bestehenende Erweiterung wie "usbbackup-3.2.20" zu installieren führt zu Fehler:


    E: Failed to fetch
    E: Internal Error, ordering was unable to handle the media swap


    Any help or support?
    Gruß, HL

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

  • Hi,
    guys, do you need a translation of the issue, please let me know..
    Regards, HL

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

  • Guys,
    I am heavily struggling with the upload functionality of the plugin file.
    The issue is I simply cannot upload the physical file!!


    Actually I have downloaded the erasmus plugin file correctly and successfully from the extras-webpage. It is stored on the PC. From the menu I choose ">plugins" and try to upload the physical file. That simply does not work. Because whatever file I select on the PC when I confirm the path and the file disappear..It seems omv does just not know what file is to pull up....


    So as I still have the option of working from command line, I thought let's do it. Here, whatever I type in, it says it cannot resolve the adress..
    I am sorry, but this thing is not stable to me..
    I urgently need your support guys, PLEASE..
    HL

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

  • Hi,
    ein Paar Reihenfolge-Probleme, aber sie sind ALLE drin, Ich bin auch auf 3.0.96....
    Es war butterweich!!
    Gruß, HL

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

  • Hi all,
    is there anyboy out there who can help me here?
    Please, it is urgent!!
    Thanks, hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

  • H all,
    auch bei diesem (meinem zweiten Problem nach dem Upgrade) konnte ich mir selbst helfen, nachdem tagelang auf HInweise gewartet habe (KEINE KRITIK , NUR FESTSTELLUNG!!!)


    1.) Unter System > Netzwerk > Schnitstelle muss beim aktiven NIC (=Netzwerkkarte, üblicherweise eth0) der "DNS Server 8.8.8.8" eingetragen sein
    2) Trivial File Transfer Protocol tftd Dienst darf nicht laufen. Bei mir lief er OHNE "aktive" zu sein. Sollte das der FAll sein, unter Dieste > tftd dn Dienst einmal aktiv setzen, raus gehen (Konfig übernehmen), wieder zurückund dann bewusst deaktivieren..


    Dann klappt's auch...


    Jungs von der Entwickung: Abgesehen davon, dass es KEINE gescheite Doku gibt, sowas gehört in die Doku, zum Ersten. Zum Zweiten, klärt doch bitte, warum der Dienst tftd bei der Standardinstallation aktiv gesetzt wird. Gehört das so? Woher kommt der Konflikt??


    NIX FÜR UNGUT, Gruß, HL

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

    • Offizieller Beitrag

    1.) Unter System > Netzwerk > Schnitstelle muss beim aktiven NIC (=Netzwerkkarte, üblicherweise eth0) der "DNS Server 8.8.8.8" eingetragen sein

    Also war es ein DNS Problem? Aber wieso hat dann das update funktioniert?

  • Hi,


    das weiß ich nicht...
    Aber um Missverständnissen vorzubeugen: Das vermeintliche "Upgrade 2.0 > 3.0" war ein Formatieren und Neu-Installation des 3.0 und KEINE Delta-Installation!!!!


    Das Ergebnis war: tftp Dienst war nicht aktiv aber der Bömmel im Sysinfo zeigt "läuft".
    Im Syslog vom AutoShutdown sagt er: Er prüft erst die IP's, dann die Sockets (=Ports), den Load,...praktisch fast alle Kriterien und zum Schluss sagte er tftp läuft. Aber bis ich das verstanden hatte, musste ich mein Test-Setup (zwei Rechner am Tisch, einer in der AutoShutdown-Schleife, der andere nicht) ca 20x hoch- und runterfahren (lassen) mit den entsprechenden Wartezeiten... Dann verstand ich wie er tickt, EUER OMV.....


    So schlägt man die Zeit im Vorruhestand tot..


    Jetzt prüft er 3 Zyklen jeweils 25 sec nach dem IP des Hauptrechners, wenn der weg ist aus dem Netz, dann pling, geht der OMV aus....


    Wir brauchen eine Doku....


    Gruß, hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!