Is UAS USB 3.x protocol is accepted from hardware (chipset) to software (OMX 3.x)?

    • OMV 3.x (stable)
    • Is UAS USB 3.x protocol is accepted from hardware (chipset) to software (OMX 3.x)?

      Hello all,

      I use OMV 3.x on a Rock64. I've got
      1 USB 3 port and use a USB 3 Hub. Because USB 3 is more efficient for HD,
      i put two USB 3 hard drives on the hub.

      All is fine, accept for copying movies
      between drives, after random minutes, drives 'disappears' from the openmediavault
      web interface and MCommander.

      i 've to reboot the OMV, and then the
      drives appears.

      I think it is a wire, power or hub problem.

      I bought new power and wire to be received
      end of january.

      When i put one drive on the USB 2 plug,
      all seems good , expect the speed.

      I use the /etc/modprobe.d, with options
      usb-storage quirks to avoid the USB 3.1 UAS HD box to use the UAS protocole.

      So all drives are in BOT mode.

      Until the items receipt, may you confirm
      if UAS protocol should be accepted by OMV 3.x (i mean the chipset and software
      accept it ) ?


      Tk's
      Rock 64 - 1 Go Ram - SD Card System on + OMV (Debian) 3.0.88 Erasmus - Linux 44.77 - 118 + Official POWER SUPPLY 3A/5V + Official ACRYLIC OPEN ENCLOSURE.