I need a install tutorial for Odroid XU4

    • OMV 3.x (stable)

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • I need a install tutorial for Odroid XU4

      Hi all I'm new hear. I dont know what OMV I'm using only that it was the lates download.(feb/9/18)

      Fairly new to linux also.

      After making img on sd card and booting up and loging in with admin/openmediavault I get this screan.
      postimg.org/image/cukjpiaf7/
      s13.postimg.org/plypw0k7b/20180209_125223_1.jpg

      And this is as fare as I can get. I cant figer out how to install and it dosnt stat my ip !

      I googl'ed around and cant find any tutorials on it.
    • write sd card
      connect xu4 to network
      turn on and wait for 20 minutes
      you can get ip address with the ip addr command
      go to browser on a different machine and go to the ip address.
      After that, watch the setup video - OMV Setup Videos
      omv 4.0.19 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • New

      Did you get the image from here?
      sourceforge.net/projects/openm…lt/files/Odroid%20images/

      Make sure to read an understand the instructions on that page. Also watch the videos ryecoaaron has linked.

      In a nut shell the process is like this:
      • check your SD card with h2testw
      • burn the image on the SD card using etcher
      • boot your XU4 with the ethernet cable connected (no wifi!!)
      • wait for 20 min to complete the process
      • find out which IP has been assigned to your xu4, either
        • on your router or
        • from a windows computer enter ping odroidxu4 in the command prompt or
        • on the xu4 itself; to login on the xu4 your user is "root" and your password is "openmediavault" (without the ""); after login type ip addr
      • use another computer (e.g. windows computer), open a browser and type the IP in the address field
      • now you should see the login page of the webUI of OMV; type in the credentials "admin" and "openmediavault
      Odroid HC2 - armbian - OMV4.x | Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 (rsnapshot) - 1x Intenso SSD 120GB - OMV4.x 64bit
      :!: Backup - Solutions to common problems in OMV - Must see OMV setup videos - OMV4 Documentation :!:

      The post was edited 1 time, last by macom ().

    • New

      macom wrote:

      Did you get the image from here?
      sourceforge.net/projects/openm…lt/files/Odroid%20images/

      Make sure to read an understand the instructions on that page. Also watch the videos ryecoaaron has linked.

      In a nut shell the process is like this:
      • check your SD card with h2testw
      • burn the image on the SD card using etcher
      • boot your XU4 with the ethernet cable connected (no wifi!!)
      • wait for 20 min to complete the process
      • find out which IP has been assigned to your xu4, either
        • on your router or
        • from a windows computer enter ping odroidxu4 in the command prompt or
        • on the xu4 itself; to login on the xu4 your user is "root" and your password is "openmediavault" (without the ""); after login type ip addr
      • use another computer (e.g. windows computer), open a browser and type the IP in the address field
      • now you should see the login page of the webUI of OMV; type in the credentials "admin" and "openmediavault

      I'm steal geting the same screan shot. Is thear a diferance from admin and root ? If so I dont know how to log in root !