OMV Stops working on Odroid c2 after about 5 minutes

    • OMV 3.x (stable)

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • OMV Stops working on Odroid c2 after about 5 minutes

      I installed OMV on my odroid c2 from the Sourceforge page. I used etcher to write it to the emmc that I got with my odroid. When I plug everything in and start it, it works just fine and I can access it from my browser. After about 5 minutes though, It loses connection and I can no longer connect to it. I looked on the router's page and it's not connected to the network. Un-plugging it and plugging it back in does not work and redoing the emmc does the exact same thing, it works for about 5 minutes and stops. It has now been powered up and plugged into the router for almost an hour and still won't work.Image Source
    • You should have a look into the syslog if possible, may you'll find a hint why you loose connectivity.
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Ninja_Slayer wrote:

      OMV on my odroid c2
      With an older image there was a problem when the router / DHCP server was IPv6 capable. I thought that we'd fixed this on latest image but at least this would be worth a look and try. In case your router also takes care of IPv6 try to temporarely disable this, burn image again, boot and see what happens.

      OMV will reboot itself one time automatically and this IPv6 bug led to no network after reboot due to screwed up /etc/network/interfaces file.
    • tkaiser wrote:

      Ninja_Slayer wrote:

      OMV on my odroid c2
      With an older image there was a problem when the router / DHCP server was IPv6 capable. I thought that we'd fixed this on latest image but at least this would be worth a look and try. In case your router also takes care of IPv6 try to temporarely disable this, burn image again, boot and see what happens.

      OMV will reboot itself one time automatically and this IPv6 bug led to no network after reboot due to screwed up /etc/network/interfaces file.
      Thanks for the help. I will try this as I do believe the router had ipv6.

      Sent from my VS988 using Tapatalk