Integration of RAID from OMV 3 into OMV 4

    • OMV 4.x
    • Resolved

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Integration of RAID from OMV 3 into OMV 4


      I have rebuilt OMV 4.x. I want to integrate my RAID from OMV 3.x.

      It will be displayed under RAID Management. However, I do not get it included in file systems. What can I do? How can I mount this RAID?

      Unfortunately, I have found nothing here in the forum and google.


      • Screenschot_Laufwerke.JPG

        46.85 kB, 678×408, viewed 164 times

      The post was edited 1 time, last by Kutsche ().

    • Hello,

      I've seen a lot about ssh now.

      If I want to mount the RAID with mount, I get the following error message:

      can not find md126 in / etc / fstab

      the command
      omv-mkconf fstab

      Could not help either.

      in fstab stands the following:

      # /etc/fstab: static file system information.
      # Use 'blkid' to print the universally unique identifier for a
      # device; this may be used with UUID= as a more robust way to name devices
      # that works even if disks are added and removed. See fstab(5).
      # <file system> <mount point> <type> <options> <dump> <pass>
      # / was on /dev/sda1 during installation
      UUID=292425d8-625e-495c-8cc7-ef867d05bf9f / ext4 errors=remount-ro 0 1
      # swap was on /dev/sda5 during installation
      UUID=cefe76d0-d35c-47c5-b21c-518d51cf48cf none swap sw 0 0
      /dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
      tmpfs /tmp tmpfs defaults 0 0
      # >>> [openmediavault]
      /dev/disk/by-label/Filme /srv/dev-disk-by-label-Filme ext4 defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grp$
      # <<< [openmediavault]

      What can I do now to mount the RAID yet