OMV has no longer a network connection

  • Hallo,
    seit einigen Tagen habe ich extreme Probleme mit OMV.
    Ich habe manchmal keine Netzwerkverbindung und ich weiß nicht ob es Hardwareseitig ist oder an OMV liegt.


    Am Kabel leigt es nicht, dass habe ich mit so einem Kabeltester getestet.


    Würde mir jemand bei der Fehleranalyse helfen?




    Hello,
    since a few days i have extremly problems with OMV.
    Sometimes i have no networkconnection and i dont know if its OMV or the hardware that fails.


    The Cable is Ok.


    I hope u can help me to find the error.

  • Than please say me which informations u need and i try my best.


    System:
    Asus B150M-K D3 (Bios is up-to-date)
    Intel Pentium G4400
    300 Watt be quiet! System Power 7
    32GB SanDisk Z400s
    8GB Crucial DDR3 1600 UDIMM CL13


    Data HDDS:
    2x4TB
    4x2TB


    THe "Server" is connected to a Netgear Switch where also other PC's connected with.
    Internet comes form a Fritzbox 3370 (also connected to the switch)


    Today i saw this at start up:


    is that normal?

  • Do you have the error messages from the beginning? Looks like a buggy firmware to me. However I do not know if that ACPI message has impct on your network reliability.
    You might try ACPI=off temporarily as boot parameter and see what happens. Nevertheless disabling ACPI has disadvantages.

    • Offizieller Beitrag

    Can nobody help?

    People were helping. Did you try a different network cable? Were there any changes around the time it stopped working? What is OMV installed on? usb stick?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi,
    Cable ist ok (as wrote in the first Post).
    OMV is installed on the 32GB SanDisk Z400s
    The only thing that changed is that we use "Deutsch-Glasfaser" instat of "Telekom" as Internet Provider.
    For that the Fritzbox has to configure as "Modem". But i set it back to the "Telekom" settings and it was still the same Problem.


    I dont know why it sometimes not work and sometimes works.
    When it works the the complete emby Database is empty and i had to sync it new.


    When i try to reinstall OMV it gives me an DHCP error but on the Fritzbox its enabled.

    • Offizieller Beitrag

    Cable ist ok (as wrote in the first Post).

    I skipped the first post because I thought it was all german. Didn't notice the english at the bottom.

    OMV is installed on the 32GB SanDisk Z400s

    Do you have the flashmemory plugin installed? What kernel is installed?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    The thread says you are on OMV 4.x but you are still using the backports jessie kernel. I would try installing the stretch backports kernel if you are really running OMV 4.x.


    apt-get install linux-image-amd64 should do that. I would also install the flashmemory plugin.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!