Hi there,
OMV was running very stable for about half a year now.
Now I am afraid of some things I would like to change:
The SMART monitoring is showing a red status for the attribute name "RAW_READ_ERROR_RATE" -> 1 Raw_Read_Error_Rate POSR-K 001 001 051 NOW 102366
While booting the microserver is showing the message: "PORT3: NOT SMART-capable hard disk". Running OMV, SMART is activated and working for all hard disks. It is the same vendor and hard disk like the others.
Sometimes the system is showing this:
My solution for using 4 disks and running the system on a different disk:
A SD-Card is pointing to the internal System-HDD connected to CDROM-SATA-Port. Since 2 weeks the system does not come up. In this situation it seems like the system is not able to find the system HDD, because the SD-card is not being found to point to the system HDD. After rebooting 2-3 times and nothing nothing different, the system is working as it is meant to.
So, some help would be very great... is the SMART-error a warning to change the HDD on port 3 ? And, why is the system sometimes not able to find the internal SD card ?