3 of 6 SATA drives showing - ACPI Error on boot and when scanning

    • OMV 4.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • 3 of 6 SATA drives showing - ACPI Error on boot and when scanning

      Last week I saw that OMV3 is reaching EOL and so I decided to install OMV4. When I now boot up my freshly installed OMV4 only 3 of my 6 HDDs are mountable. Under Disks all 6 show (plus my OS), so the system is detecting them.

      When the system boots, or a run a Scan under Discs, I get the following error:


      ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)

      ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170728/psparse-550)
      ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170728/psargs-364)
      ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170728/psparse-550)
      The 6 HDDs are plugged in to a Supermicro APC-SAS2LP-MV8 expansion card. The OS drive (120GB Kingston SSD) is plugged in to SATA0 on the motherboard. There were no errors present or displayed during install or during update that I can recall.

      I never noticed this before when I was running OMV3. My OMV build is up to date, and I've got Kernel Debian GNU/Linux, with Linux 4.16.0-0.bpo.1-amd64 installed.

      My system hardware is as follows:

      • Motherboard: Gigabyte B75M-D3H
      • BIOS version: F15 (Oct-23-13) - Latest version
      • CPU: Intel Core i7-2600
      • RAM: 16GB DDR3
      • SATA Card: Supermicro AOC-SAS2LP-MV8 (Marvell 88SE9485) running BIOS 4.0.0.1812 (latest from manufacturer site)

      The post was edited 1 time, last by Caboose ().