10gbps Stopped being 10gbps and X710 compatibility

  • Hello people!


    I am running OMV 3.0.53 and have a 10gbps X540 Intel card with 2 ports. It was all swell, but one day, out of the blue, one of the ports simply stopped supplying 10gbps and now only supplies 1gbps. I identified it as the port, because I switched cables and computers, and only this port is 1gbps. Is there any command where I can see if some config was reseted? In the GUI everything appears normal (note: complete linux noob here).


    Also, is intel X710 4 ports compatible with OMV Erasmus?


    Thanks!!

  • Yo can use ethtool or ifconfig commands to check your port.


    To test your port; I would recommend iperf both on client and server to check your network speed...


    On the server side (don't forget to open the 5001 port if you have a firewall running)


    Code
    # apt-get install iperf
    # iperf -s



    On the client side (Windows and/or Linuxà


    Code
    iperf -c ipOfYourServer



    You can find multiple tutorial on the net.

    Lian Li PC-V354 (with Be Quiet! Silent Wings 3 fans)
    ASRock Rack x470D4U | AMD Ryzen 5 3600 | Crucial 16GB DDR4 2666MHz ECC | Intel x550T2 10Gb NIC

    1 x ADATA 8200 Pro 256MB NVMe for System/Caches/Logs/Downloads
    5 x Western Digital 10To HDD in RAID 6 for Datas
    1 x Western Digital 2To HDD for Backups

    Powered by OMV v5.6.26 & Linux kernel 5.10.x

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!