Hallo forum -
I really need you input for these problems i have suddenly after fresh install..
Its all started with i had some problem runing nginx (my own website , got always 403 forbidden nginx site) so i decided to reinstall all and try agian.. (i had teste a lot with other apps - so wanted to start fresh)
So now i have a couple problems (See the first 2 pictures) for the first 2 problems:
1.problem:
IMG_0281.JPG:
This is what i see when i boot
2.problem:
and sometimes my network will not be runing, so i try to omv-firstaid and try to setuo from there, but then i got some error with:
Cannot create socket to [localhost]:2812 -- Connection refusedThen i run systemctl status monit:
and get this: IMG_0282.JPG
3.problem:(does not have a picture right now)
when i boot the pc up, i get something like this (Found this on an another website)
[ 3626.400368] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)[ 3626.400445] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out[ 3626.400505] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out[ 3629.646801] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)[ 3629.646874] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out[ 3629.646931] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out[ 3629.649227] ata3.00: configured for UDMA/100[ 3629.665886] ata3.00: device reported invalid CHS sector 0[ 3629.668636] ata3: EH complete[ 3629.668666] sd 2:0:0:0: [sda] START_STOP FAILED[ 3629.668668] sd 2:0:0:0: [sda][ 3629.668669] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE[ 3629.668671] sd 2:0:0:0: [sda][ 3629.668673] Sense Key : Aborted Command [current] [descriptor][ 3629.668675] sd 2:0:0:0: [sda][ 3629.668686] Add. Sense: No additional sense information[ 3629.690983] mei 0000:00:16.0: stop[ 3629.693846] ACPI: Preparing to enter system sleep state S5and its just keep doing it??? but i have an idea that i coule be ONLY when my RAID1 is plugged - but i got to test first..but yeah ant input will be apreciatetthanks in advice..
I just installed omv 4.1.3 to a virtualbox and got problem 2..:
2018-06-14 11_14_47-omv4Oracle VM VirtualBox.jpg