TFTP over bonded interface slow or inexistant

  • Hello Team,


    First of all, thank you for everyone participating on this forum. it has been a great help since I began with my OMV installation.


    I need your help on, well the title says it all,TFTP using bonded interfaces.


    I've noticed that once I enable the bond on the server, every client that tries to connect has two different behaviours:


    • They don't catch a lease from the DHCP
    • They catch a lease from DHCP but transfer of files are slow or stop during transfer.


    Now if I disable the bond, with exactly the same settings, all is good.


    I'm using LACP 802.3ad bond configuration.


    Has anybody experienced this or is using bonding and pxe successfully ?


    Thanks :thumbup:
    Chris

    CPU : CORE i7-2600 3.4Ghz
    RAM : 8Go RAM DDR3
    HDD : 4x3To WD Red
    OMV 4.1.7 Arrakis

  • And you expect LACP being handled properly by what exactly at this early stage?

    Great unhelpful answer Tkaiser :thumbdown: .


    Juniper switches have options that allow PXE to work even on bonded interfaces. I was wondering if anybody found a suitable configuration to have it working on Linux 'cause my switch does not offer it.


    Anyway thanks for trying to be constructive

    CPU : CORE i7-2600 3.4Ghz
    RAM : 8Go RAM DDR3
    HDD : 4x3To WD Red
    OMV 4.1.7 Arrakis

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!