Added Drive to PowerEdge T20 defeats boot SSD

    • Resolved
    • OMV 4.x
    • Added Drive to PowerEdge T20 defeats boot SSD

      I had a failed USB boot stick on my Dell PowerEdge T20. I obtained an SSD drive and installed OMV version 4.1.3 successfully. The T20 boots perfectly. Then I reconnect one of my HDDs and reboot. Instead of booting, OMV goes to initramfs on the command line. Says no init found. Thought it might be a hardware problem, but now I don't think so, since OMV is presenting the initramfs command line. Can anyone help me with this?????



      In case anybody ever reads this, I solved the problem by resetting my SATA drives to ATA instead of AHCI in my bios. Afterwards, I was able to reconnect the storage drives and boot from my SSD.

      The post was edited 1 time, last by curious1: Update ().

    • I have exactly the same topic, OMV boots until i connect 3 of my drives and with the last one it give the same screen ..

      I found the issue, simply i changed my grup entry since device was moved from /dev/sda to /dev/sdc ....

      Solved for me.. simply I booted from the stick to find out my device name...

      The post was edited 1 time, last by badway ().