PCIE Chip AC696 card driver ?

    • OMV 3.x
    • PCIE Chip AC696 card driver ?

      Hello.
      I'm using the lastest revision of OMV 3 for some time now.

      All's working great.


      As i need some more hard drives, i added a Mini PCI-E PCI Express to 2-Port SATA Expansion Card Single Chip AC696.

      But i can't get my hard driver on this card working with omv, the hard driver don't show up in omv.


      I tried the same card by booting in windows 7 and the hard drives works


      So is there any driver usable with omv3 for sata AC696 chipset ?


      Thanks a lot
    • I can't find what module this should use. What is the output of: lspci
      You might have to install it with apt-get install pciutils
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • lspci :

      00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge (rev 02)
      00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (rev 02)
      00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
      00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
      00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01)
      00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01)
      00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
      00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
      00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
      00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
      00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
      00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
      00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 01)
      00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 01)
      00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
      01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
      05:00.0 SATA controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)

      the Silicon Image, Inc. SiI 3114 is my old pci > 4 sata
      the Intel Corporation NM10/ICH7 Family SATA Controller is my intégrated sata ports

      i can't find the pci xpress 2 sata ports





      thanks

      Post by satsuki ().

      This post was deleted by ryecoaaron: dupe ().
    • Without the vendor and device ID, I really don't know how else to figure out what module it needs. Maybe upgrading to OMV 4.x to use the 4.16 kernel would help? Otherwise, boot systemrescuecd on the system to see if you can see it in lspci.
      omv 4.1.8.2 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.8
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please read this before posting a question.
      Please don't PM for support... Too many PMs!
    • Users Online 1

      1 Guest