Open VPN Connection

  • Hi,


    im a bit confused about Open VPN Connections.


    I`ve configured the Open VPN Server with disabled standard gateway and push "route 10.8.0.1 255.255.255.0"


    If i connect with my client i get 6 newly created routes whie my remote is 89.98.65.132


    Target | Mask | Gateway | Interface | Metric
    89.98.65.128 | 255.255.255.192 | 10.8.0.1 | 10.8.0.3 |20
    10.8.0.0 | 255.255.255.0 | 10.8.0.3 |10.8.0.3 |276
    10.8.0.3 | 255.255.255.255 |10.8.0.3 | 10.8.0.3 |276
    10.8.0.255 | 255.255.255.255 |10.8.0.3 | 10.8.0.3 |276
    224.0.0.0 | 240.0.0.0 | 10.8.0.3 | 10.8.0.3 | 276
    255.255.255.255 | 255.255.255.255 | 10.8.0.3 |10.8.0.3 | 276


    if i call the address 10.8.0.1 or 89.98.65.132 to get on the omv interface i did'nt get any connection.
    also a traceroute to 10.8.0.1 and 89.98.65.132 does nothing.


    if i manualy remove the route 89.98.65.128 255.255.255.192 10.8.0.1 10.8.0.3 20 on the client i get a more expected result.


    traceroute to 89.98.65.128 goes through my isp the normal way and traceroute to 10.8.0.1 directly to the server.
    The interface is callable through both adresses as i wanted to disable the normal communication with a firewall rule.


    but i dont find a way to disable the creation of the route above.


    What can i do to enable communication to the sever over vpn if a client connects without routing any trafic over the vpn connection?

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!