Dear community,
Short story + question
Wiping a disk after a (possibly) failed BTRFS partition results in model shown as 'n/a' and a incorrect Serial Number (see screenshot 'Disc_NOK). In the past and on a different system the model is shown and the Serial Number is different (see screenshot 'Disc_OK'). Also verified with a second disk, this one has the same issue (no model and S/N on main system, model and correct S/N on second system). What could be causing this and how to solve it?
Long story
Earlier today I wanted to download some files via nzbget. I returned a lot of permission related errors. Further investigation showed that the entire disk was read only and that the BTRFS partition got damaged. Unfortunately I can't recall all steps/errors done,
- btrfs-zero-log /dev/sdb1 <-- this one didn't work but the command line gave the proper directions;
- btrfs free extent errno 5 io failure.
Since I have multiple backups on a second system I didn't want to spend to much time in investigating what was causing the issue (as always, time was critical ). Therefore I wanted to wipe the disk, create a new BTRFS file system and sync the files back from the second system. Then the error of 'model n/a' and incorrect S/N arose. Steps I tried to solve the issue:
- Wipe disk, create partition:
- on main system;
- on second system;
- on laptop+Linux;
- Deleted all Shared folders which exist on the HDD;
- Multiple reboots in between the Wiping/creation of BTRFS partition, all to no avail.
Still no correct model and S/N shown.
I thought maybe the SATA port on the HC1 got damaged, however I'm able to create a BTRFS partition, shared folder for samba and I can read/write to this folder from a laptop+Windows.
Setup
Main system: OMV running on a Odroid HC1 with the image provided by Tkaiser+ARMbian (started with OMV 3 and updated it myself to OMV 4)
This setup is running on a 32 GB Samsung Evo Plus Mirco-sd card
Gigabit wired connection
Second system: OMV running on a Banana Pi M1 with the image provided by Tkaiser+ARMbian (couple of weeks ago a fresh install with OMV 4.1x)
This setup is running on a 16 GB Samsung Evo Micro-sd card
Gigabit wired connection
If more information is required please let me know. Thanks in advance.
P.S. I'm not sure if this is the right section, feel free to move it