Announcement Unofficial Plugin Repo for 0.5 Sardaukar, 1.0 Kralizec, 2.0 Stoneburner, 3.0 Erasmus, 4.0 Arrakis

    • Hexcode wrote:

      Seems like the openmediavault-openvpn.postinst is broken...


      Source Code

      1. addgroup --quiet \
      2. --system \
      3. openvpn
      This line drops an error if the group openvpn is already there - so adding a check before might be good.
      the helper function omv_group_id_exists() can be used.
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Hexcode wrote:

      This line drops an error if the group openvpn is already there - so adding a check before might be good.
      Fixed


      votdev wrote:

      the helper function omv_group_id_exists() can be used.
      Thanks :)
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • g2_ufo wrote:

      i think that backports repo list must include non-free also, but now it is only include main and contrib.
      This was intentional. I wanted to add it without upgrading any packages from backports. Adding non-free would upgrade the firmware even if you were still using the standard kernel. If you need it, you can edit the repo in the repo tab.

      g2_ufo wrote:

      I cannot find openmediavault-remoteshare plugin on omv3. Where is it?
      I rewrote the remoteshare plugin completely. Since it has no upgrade path, I gave it a new name - remotemount
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      This was intentional. I wanted to add it without upgrading any packages from backports. Adding non-free would upgrade the firmware even if you were still using the standard kernel. If you need it, you can edit the repo in the repo tab.
      Ok.


      ryecoaaron wrote:

      I rewrote the remoteshare plugin completely. Since it has no upgrade path, I gave it a new name - remotemount
      Thanks, But plugin does not have webdav
    • g2_ufo wrote:

      Thanks, But plugin does not have webdav
      You are welcome to add it. I haven't decided if I was going to add webdav. I didn't add it to remote share either.
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Sat32blk wrote:

      Emby, Greyhole, Remoteshare is there a workaround??
      Emby - Yes, manually install it. It is easy. Read the big emby thread.

      Greyhole - Nope. Not unless someone ports it.

      Remoteshare - Use remotemount. There is no upgrade path though.
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      Emby - Yes, manually install it. It is easy. Read the big emby thread.

      Greyhole - Nope. Not unless someone ports it.

      Remoteshare - Use remotemount. There is no upgrade path though
      Thanks for the reply

      I'm using OMV 2/3 in a VM's trying to get comfortable with it before I move my setup off WHSv2.
      Do you know when OMV 3 will be officially out of beta release.

      Thanks
    • Sat32blk wrote:

      Do you know when OMV 3 will be officially out of beta release.
      Officially? No. Do I think you should use OMV 3.x? Yes.
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Hopefully this is the right place to raise a bug report for OMV-Extras

      OMV-Extras kernel tab 'Set as default boot kernel' button corrupts my /etc/default/grub file eating it line by line whenever I change the default boot kernel :!:

      Initially I had:

      Source Code

      1. # If you change this file, run 'update-grub' afterwards to update
      2. # /boot/grub/grub.cfg.
      3. # For full documentation of the options in this file, see:
      4. # info -f grub -n 'Simple configuration'
      5. GRUB_DEFAULT=0
      6. GRUB_TIMEOUT=5
      7. GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
      8. GRUB_CMDLINE_LINUX_DEFAULT="quiet"
      9. GRUB_CMDLINE_LINUX=""
      10. ...

      I selected a different default kernel and ended up with:

      Source Code

      1. # If you change this file, run 'update-grub' afterwards to update
      2. # /boot/grub/grub.cfg.
      3. # For full documentation of the options in this file, see:
      4. # info -f grub -n 'Simple configuration'
      5. GRUB_DEFAULT=2\nGRUB_TIMEOUT=5
      6. GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
      7. GRUB_CMDLINE_LINUX_DEFAULT="quiet"
      8. GRUB_CMDLINE_LINUX=""
      9. ...
      Changing back to the original kernel and another line was eaten:


      Source Code

      1. # If you change this file, run 'update-grub' afterwards to update
      2. # /boot/grub/grub.cfg.
      3. # For full documentation of the options in this file, see:
      4. # info -f grub -n 'Simple configuration'
      5. GRUB_DEFAULT=0\nGRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
      6. GRUB_CMDLINE_LINUX_DEFAULT="quiet"
      7. GRUB_CMDLINE_LINUX=""
      8. ...
      and so on =O :


      Source Code

      1. # If you change this file, run 'update-grub' afterwards to update
      2. # /boot/grub/grub.cfg.
      3. # For full documentation of the options in this file, see:
      4. # info -f grub -n 'Simple configuration'
      5. GRUB_DEFAULT=2\nGRUB_CMDLINE_LINUX_DEFAULT="quiet"
      6. GRUB_CMDLINE_LINUX=""
      7. ...
      My NAS box is running OMV 3.0.59 erasmus, 64-bit AMD 4.7.0 backport kernel and omvextrasorg 3.4.15. (I'm using the 4.7 kernel because I use btrfs on my disks and want to use the most recent btrfs-progs that is currently available)


      Sophie x
    • You must have installed Debian from a non-OMV ISO? Most of the entries in the OMV default grub file are commented out. omv-extras is fixed now.
      omv 4.1.11 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      You must have installed Debian from a non-OMV ISO? Most of the entries in the OMV default grub file are commented out. omv-extras is fixed now.
      Yes, I performed a minimal Debian Jessie install and applied OMV on top of it. I did it this way because I'm using an NVME SSD for my system drive but my BIOS doesn't recognise it so I have a boot partition on a USB FLASH stick and I needed to manually assign partitions to accomplish this configuration.

      Thank you for fixing OMV-Extras :)
      Sophie x
    • Hi Guy,

      i'm using omg 3.0.59 with manualy installation of jessie.
      Cased by using uefi boot on my dell t20.

      I'm crashed my system, now i need to reinstall the system.

      But now i'm not able to install the back port kernel.
      on the old 3.0.59 installation it was working out of the box after adding the omv-extras.

      This is the error message:


      Source Code

      1. Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf omvextras installbackports': Install backports 4.8.0-0.bpo.2 kernel and headers Reading package lists...
      Did i do anything wrong?

      Edit:
      Is it possible that there is something wrong mit the repo?
      I'm just active the testing repo and got an error, no packages out of the testing repo where shown.



      Cheers Robert
      OMV 3.0.XX Erasmus always up to date.
      Modded dell t20 into 19" rack case / xeon e3-1225v3 / 8GB RAM / 1x 250 SSD (OS) / 4x WD10EADS (Raid5) (hdd running now for more than 5 years ;) )

      The post was edited 1 time, last by no_Legend ().

    • Users Online 3

      3 Guests