Change disk from data to parity

  • This array is snapraid....
    I have 1 parity drive and 5 data drives in new install...i then deleted a data drive, added that drive back into the array as a parity drives and I get this message with "fix, check, sync"...


    Self test...
    Loading state from /srv/dev-disk-by-id-ata-TOSHIBA_HDWD130_X7V0PPGAS/snapraid.content...
    Decoding error in '/srv/dev-disk-by-id-ata-TOSHIBA_HDWD130_X7V0PPGAS/snapraid.content' at offset 94
    The file CRC is correct!
    Disk 'raidtwo' with uuid '9063dc29-32e2-4ea2-b5e1-8c3fdadc88f9' not present in the configuration file!
    If you have removed it from the configuration file, please restore it



    How can I configure to have that drive as parity drive? Would a re-boot make this work?

  • Your questions are answered in the SnapRAID FAQ under the Use section.


    https://www.snapraid.it/faq


    After you reconfigure for this you are going to have to completely rebuild the parity with this command and it could take a long time.
    snapraid -F sync

    --
    Google is your friend and Bob's your uncle!


    OMV AMD64 7.x on headless Chenbro NR12000 1U 1x 8m Quad Core E3-1220 3.1GHz 32GB ECC RAM.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!