Various problems getting started with Odroid HC (best practice)

    • Various problems getting started with Odroid HC (best practice)

      Hello everybody!

      I'm having hard times getting my two new hc2's up and running. I'm using the official power supply a WD 4TB Red Drive and a WD 2 TB Green Drive. I got new Sandisk Ultra A1 32GB micro SD cards and I'm using etcher for writing/validating.

      In all it should be really straight forward like:
      Till here everything works as expected but then things get a little weird. I gave already a couple of fresh starts (on booth devices with clean sd cards and clean hd) and can reproduce these steps:

      Directly after booting and letting the unattended upgrades rooling as well as doing some little settings (web ui timeout, password, hostename, ssh -> didn't touch the hard drive settings!)

      I get these error messages doing a
      apt update

      Source Code

      1. Err:7 http://ppa.launchpad.net/kyle1117/ppa/ubuntu cosmic InRelease
      2. The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3028C3C96AD57103
      3. Reading package lists... Done
      4. W: GPG error: http://ppa.launchpad.net/kyle1117/ppa/ubuntu cosmic InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3028C3C96AD57103
      5. E: The repository 'http://ppa.launchpad.net/kyle1117/ppa/ubuntu cosmic InRelease' is not signed.
      6. N: Updating from such a repository can't be done securely, and is therefore disabled by default.
      7. N: See apt-secure(8) manpage for repository creation and user configuration details.
      8. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      9. W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      10. W: Target Contents-deb (main/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      11. W: Target Contents-deb (main/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      12. W: Target Packages (contrib/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      13. W: Target Packages (contrib/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      14. W: Target Contents-deb (contrib/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      15. W: Target Contents-deb (contrib/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      16. W: Target Packages (non-free/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      17. W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      18. W: Target Contents-deb (non-free/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      19. W: Target Contents-deb (non-free/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      20. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      21. W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      22. W: Target Contents-deb (main/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      23. W: Target Contents-deb (main/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      24. W: Target Packages (contrib/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      25. W: Target Packages (contrib/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      26. W: Target Contents-deb (contrib/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      27. W: Target Contents-deb (contrib/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      28. W: Target Packages (non-free/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      29. W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      30. W: Target Contents-deb (non-free/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      31. W: Target Contents-deb (non-free/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      Display All



      I think it's nothing really bad (just not nice to look at after a fresh install..)

      But when I'm doing a
      apt upgrade

      Source Code

      1. Reading package lists... Done
      2. Building dependency tree
      3. Reading state information... Done
      4. Calculating upgrade... Done
      5. The following NEW packages will be installed:
      6. sshpass
      7. The following packages will be upgraded:
      8. armbian-firmware base-files ca-certificates dirmngr dpkg dpkg-dev folder2ram fuse gnupg gnupg-agent gnupg2 gpgv hdparm hostapd htop libdpkg-perl libfuse2 libgd3 libgnutls30
      9. libldap-2.4-2 libldap-common libmagic-mgc libmagic1 libnm0 libnss-myhostname libpam-systemd libseccomp2 libsystemd0 libtirpc1 libudev1 libx11-6 libx11-data libxapian30
      10. linux-dtb-next-odroidxu4 linux-image-next-odroidxu4 linux-libc-dev linux-stretch-root-next-odroidxu4 linux-u-boot-odroidxu4-next network-manager openmediavault
      11. openmediavault-flashmemory openmediavault-omvextrasorg patch sunxi-tools systemd systemd-sysv tzdata udev wpasupplicant
      12. 49 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
      13. Need to get 44.2 MB of archives.
      14. After this operation, 1504 kB disk space will be freed.
      15. Do you want to continue? [Y/n]
      Display All
      When I'm running the upgrades within ssh I get a screen saying openmediavault is installed and I need torun openmediavault-init...
      When I'm using the openmediavault web ui for upgrades it does it without asking anything

      At this point I should have a clean, fresh and up to date version of OMV 4 installed.


      And here it starts. When I install my plugins (backup, rsnapshot, usb-backup, luks)

      Source Code

      1. apt install openmediavault-backup openmediavault-luksencryption openmediavault-rsnapshot openmediavault-usbbackup Reading package lists... Done
      2. Building dependency tree
      3. Reading state information... Done
      4. The following additional packages will be installed:
      5. cryptsetup cryptsetup-bin fsarchiver liblchown-perl rsnapshot
      6. Suggested packages:
      7. reiserfsprogs reiser4progs ntfsprogs
      8. Recommended packages:
      9. busybox | busybox-static
      10. The following NEW packages will be installed:
      11. cryptsetup cryptsetup-bin fsarchiver liblchown-perl openmediavault-backup openmediavault-luksencryption openmediavault-rsnapshot openmediavault-usbbackup rsnapshot
      12. 0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
      13. Need to get 773 kB of archives.
      14. After this operation, 3346 kB of additional disk space will be used.
      15. Do you want to continue? [Y/n]
      Display All

      it ends with following errors

      Source Code

      1. Updating locale files ...
      2. Updating file permissions ...
      3. Purging internal cache ...
      4. Restarting engine daemon ...
      5. Processing triggers for systemd (232-25+deb9u6) ...
      6. Processing triggers for initramfs-tools (0.130) ...
      7. update-initramfs: Generating /boot/initrd.img-4.14.69-odroidxu4
      8. E: busybox or busybox-static, version 1:1.22.0-17~ or later, is required but not installed
      9. update-initramfs: failed for /boot/initrd.img-4.14.69-odroidxu4 with 1.
      10. dpkg: error processing package initramfs-tools (--configure):
      11. subprocess installed post-installation script returned error exit status 1
      12. Errors were encountered while processing:
      13. initramfs-tools
      14. E: Sub-process /usr/bin/dpkg returned an error code (1)
      Display All

      openmediavault is kind of working but it has a unreliable web ui and the file system tab is missing.

      I reproduced this at least five times the last days and can say that it's always ending like this - no matter using the web ui or doing things over ssh. For me it looks there is something broken - but I don't know what ?(

      Happy Halloween! :evil:
    • Have you installed omv-extras?
      And tried to install the plugins from the GUI?

      BTW: the kyle1117 ppa is an artefact from cloudshell and can be removed (or ignored). Same for double entry warnings. You can either edit the sources list or just ignore them.
      Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x
      Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide :!:
    • macom wrote:

      Have you installed omv-extras?
      It's already activated in the omv4 armbian based images:


      macom wrote:

      And tried to install the plugins from the GUI?
      Both GUI and command line, couple of times on two different odroid hc's with two different sd cards and two different hard disks.
      When installing from the GUI it's just throwing unlimited ----- ERROR ---- messages in the end. When I installed via CLI I get the following bit more precise errors:


      update-initramfs: failed for /boot/initrd.img-4.14.69-odroidxu4 with 1.
      dpkg: error processing package initramfs-tools (--configure):
      subprocess installed post-installation script returned error exit status 1

      macom wrote:

      BTW: the kyle1117 ppa is an artefact from cloudshell and can be removed (or ignored). Same for double entry warnings. You can either edit the sources list or just ignore them.
      Good to know. What is the cleanest way to remove the ppa? For the double entries I can just delete the second list under: /etc/apt/sources.list.d/openmediavault-kernel-backports.list I guess?

      Found it, just do a simple:

      Source Code

      1. rm /etc/apt/sources.list.d/openmediavault-kernel-backports.list
      2. rm /etc/apt/sources.list.d/kyle1117-ubuntu-ppa-cosmic.list
      And you are good!

      The only error message still exists now with apt update is this (well known) one:

      Source Code

      1. Fetched 241 kB in 6s (38.7 kB/s)
      2. Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb63183d8>
      3. Traceback (most recent call last):
      4. File "/usr/lib/python3.5/weakref.py", line 117, in remove
      5. TypeError: 'NoneType' object is not callable
      6. Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb63183d8>
      7. Traceback (most recent call last):
      8. File "/usr/lib/python3.5/weakref.py", line 117, in remove
      9. TypeError: 'NoneType' object is not callable
      10. Reading package lists... Done
      11. Building dependency tree
      Display All







      Weird thing is that the file system tab is missing after the somehow failed installation of the plugins:



      This is kind of an old bug and already fixed by @votdev problem I read in another thread...

      The post was edited 2 times, last by troublem4keR: The message is tooooooo long, must be under 10,000 characters. ().

    • For debugging propose here is a armbianmonitor - u

      Source Code

      1. Mon Dec 24 12:21:31 UTC 2018 | Odroid XU4 | 5.60 | armhf | armv7l | 4.14.69-odroidxu4
      2. ### dmesg:
      3. [ 0.000000] Booting Linux on physical CPU 0x100
      4. [ 0.000000] Linux version 4.14.69-odroidxu4 (root@nightly) (gcc version 6.4.1 20171012 (Linaro GCC 6.4-2017.11)) #34 SMP PREEMPT Wed Sep 19 12:45:24 CEST 2018
      5. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=50c5387d
      6. [ 0.000000] CPU: div instructions available: patching division code
      7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
      8. [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
      9. [ 0.000000] Memory policy: Data cache writealloc
      10. [ 0.000000] cma: Reserved 128 MiB at 0xb6800000
      11. [ 0.000000] Samsung CPU ID: 0xe5422001
      12. [...]
      Display All

      Full output: ix.io/1wLE

      Maybe @tkaiser or someone else has an idea what's going on? 8|
    • Interesting. Now I made a apt update and got one.

      Source Code

      1. apt list --upgradable
      2. Listing... Done
      3. openmediavault/arrakis,arrakis 4.1.16-2 all [upgradable from: 4.1.16-1]


      And this is what happens doing the apt upgrade (second part is the end with the error message)

      Source Code

      1. apt upgrade
      2. Reading package lists... Done
      3. Building dependency tree
      4. Reading state information... Done
      5. Calculating upgrade... Done
      6. The following packages will be upgraded:
      7. openmediavault
      8. 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
      9. 1 not fully installed or removed.
      10. Need to get 1908 kB of archives.
      11. After this operation, 0 B of additional disk space will be used.
      12. Do you want to continue? [Y/n] y
      13. Get:1 http://packages.openmediavault.org/public arrakis/main armhf openmediavault all 4.1.16-2 [1908 kB]
      14. Fetched 1908 kB in 0s (3935 kB/s)
      15. perl: warning: Setting locale failed.
      16. perl: warning: Please check that your locale settings:
      17. LANGUAGE = "en_US.UTF-8",
      18. LC_ALL = (unset),
      19. LC_MONETARY = "de_DE.UTF-8",
      20. LC_COLLATE = "C",
      21. LC_ADDRESS = "de_DE.UTF-8",
      22. LC_TELEPHONE = "de_DE.UTF-8",
      23. LC_MESSAGES = "en_US.UTF-8",
      24. LC_NAME = "de_DE.UTF-8",
      25. LC_MEASUREMENT = "de_DE.UTF-8",
      26. LC_IDENTIFICATION = "de_DE.UTF-8",
      27. LC_NUMERIC = "de_DE.UTF-8",
      28. LC_PAPER = "de_DE.UTF-8",
      29. LANG = "en_US.UTF-8"
      30. are supported and installed on your system.
      31. perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
      32. locale: Cannot set LC_ALL to default locale: No such file or directory
      33. Preconfiguring packages ...
      34. (Reading database ... 48982 files and directories currently installed.)
      35. Preparing to unpack .../openmediavault_4.1.16-2_all.deb ...
      36. Unpacking openmediavault (4.1.16-2) over (4.1.16-1) ...
      37. Setting up initramfs-tools (0.130) ...
      38. update-initramfs: deferring update (trigger activated)
      39. Setting up openmediavault (4.1.16-2) ...
      40. locale: Cannot set LC_ALL to default locale: No such file or directory
      41. Updating configuration database ...
      42. Updating configuration ...
      43. /usr/bin/locale: Cannot set LC_ALL to default locale: No such file or directory
      44. Processing triggers for rsyslog (8.24.0-1) ...
      45. Processing triggers for initramfs-tools (0.130) ...
      46. update-initramfs: Generating /boot/initrd.img-4.14.69-odroidxu4
      47. E: busybox or busybox-static, version 1:1.22.0-17~ or later, is required but not installed
      48. update-initramfs: failed for /boot/initrd.img-4.14.69-odroidxu4 with 1.
      49. dpkg: error processing package initramfs-tools (--configure):
      50. subprocess installed post-installation script returned error exit status 1
      51. Processing triggers for openmediavault (4.1.16-2) ...
      52. locale: Cannot set LC_ALL to default locale: No such file or directory
      53. Restarting engine daemon ...
      54. Updating locale files ...
      55. Updating file permissions ...
      56. Purging internal cache ...
      Display All

      Source Code

      1. Errors were encountered while processing:
      2. initramfs-tools
      3. Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb627e420>
      4. Traceback (most recent call last):
      5. File "/usr/lib/python3.5/weakref.py", line 117, in remove
      6. TypeError: 'NoneType' object is not callable
      7. Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb627e420>
      8. Traceback (most recent call last):
      9. File "/usr/lib/python3.5/weakref.py", line 117, in remove
      10. TypeError: 'NoneType' object is not callable
      11. E: Sub-process /usr/bin/dpkg returned an error code (1)
      Display All
      My whole system is broken, isn't it? ;(

      And doing the same in the gui gives this output:



      Just now I saw "E: busybox or busybox-static, version 1:1.22.0-17~ or later, is required but not installed"

      So I just did a "apt install busybox" and the output is the following:

      Source Code

      1. Reading package lists... Done
      2. Building dependency tree
      3. Reading state information... Done
      4. The following NEW packages will be installed:
      5. busybox
      6. 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
      7. 1 not fully installed or removed.
      8. Need to get 392 kB of archives.
      9. After this operation, 593 kB of additional disk space will be used.
      10. Get:1 [url]http://cdn-fastly.deb.debian.org/debian[/url] stretch/main armhf busybox armhf 1:1.22.0-19+b3 [392 kB]
      11. Fetched 392 kB in 0s (999 kB/s)
      12. perl: warning: Setting locale failed.
      13. perl: warning: Please check that your locale settings:
      14. LANGUAGE = "en_US.UTF-8",
      15. LC_ALL = (unset),
      16. LC_MONETARY = "de_DE.UTF-8",
      17. LC_COLLATE = "C",
      18. LC_ADDRESS = "de_DE.UTF-8",
      19. LC_TELEPHONE = "de_DE.UTF-8",
      20. LC_MESSAGES = "en_US.UTF-8",
      21. LC_NAME = "de_DE.UTF-8",
      22. LC_MEASUREMENT = "de_DE.UTF-8",
      23. LC_IDENTIFICATION = "de_DE.UTF-8",
      24. LC_NUMERIC = "de_DE.UTF-8",
      25. LC_PAPER = "de_DE.UTF-8",
      26. LANG = "en_US.UTF-8"
      27. are supported and installed on your system.
      28. perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
      29. locale: Cannot set LC_ALL to default locale: No such file or directory
      30. Selecting previously unselected package busybox.
      31. (Reading database ... 48982 files and directories currently installed.)
      32. Preparing to unpack .../busybox_1%3a1.22.0-19+b3_armhf.deb ...
      33. Unpacking busybox (1:1.22.0-19+b3) ...
      34. Setting up busybox (1:1.22.0-19+b3) ...
      35. Setting up initramfs-tools (0.130) ...
      36. update-initramfs: deferring update (trigger activated)
      37. Processing triggers for man-db (2.7.6.1-2) ...
      38. Processing triggers for initramfs-tools (0.130) ...
      39. update-initramfs: Generating /boot/initrd.img-4.14.69-odroidxu4
      40. cryptsetup: WARNING: failed to detect canonical device of /dev/mmcblk1p2
      41. cryptsetup: WARNING: could not determine root device from /etc/fstab
      42. I: The initramfs will attempt to resume from /dev/zram7
      43. I: (UUID=a7887f58-e9cf-4d97-9ff0-242528b14273)
      44. I: Set the RESUME variable to override this.
      45. W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      46. update-initramfs: Converting to u-boot format
      47. W: APT had planned for dpkg to do more than it reported back (5 vs 9).
      48. Affected packages: initramfs-tools:armhf
      Display All

      No idea what's going on! For me this should be kind of a clean install but there is so many weird things... I did setup a couple of omv server but never experienced something like that ?(

      The post was edited 3 times, last by troublem4keR ().

    • I don't know what is going on.

      But the absolute first step is to make certain that the initial install worked. If it didn't you get weird errors.

      You MUST be connected to the internet while installing. And the root filesystem should afterwards be expanded.

      SSH in and run: lsblk

      / should be 7.3G. If not then the installation never finished.
      OMV 4, 7 x ODROID HC2, 1 x ODROID HC1, 3 x 12TB, 2 x 8TB, 1 x 4TB, 1 x 2TB SSHD, 1 x 500GB SSD, GbE, WiFi mesh
    • Adoby wrote:

      I don't know what is going on.

      But the absolute first step is to make certain that the initial install worked. If it didn't you get weird errors.

      You MUST be connected to the internet while installing. And the root filesystem should afterwards be expanded.

      SSH in and run: lsblk

      / should be 7.3G. If not then the installation never finished.
      Thank's for the tip. Both ordroid's HC's were connected to internet while the setup and got plenty of time.

      Also the filesystem size looks good:

      Source Code

      1. ### lsblk:
      2. NAME FSTYPE SIZE MOUNTPOINT
      3. sda 1.8T
      4. └─sda1 crypto_LUKS 1.8T
      5. mmcblk1 29.7G
      6. ├─mmcblk1p1 ext4 64M /boot
      7. ├─mmcblk1p2 btrfs 7.3G /
      8. └─mmcblk1p3 22G
    • Hi,

      also having Error issues while updating install. Here you can find the log.

      Using a HC2 with 32GB SSD (Sandisk) and a WD Red 4TB


      0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
      1 not fully installed or removed.
      After this operation, 0 B of additional disk space will be used.
      Setting up initramfs-tools (0.130) ...
      update-initramfs: deferring update (trigger activated)
      Processing triggers for initramfs-tools (0.130) ...
      update-initramfs: Generating /boot/initrd.img-4.14.94-odroidxu4
      E: busybox or busybox-static, version 1:1.22.0-17~ or later, is required but not installed
      update-initramfs: failed for /boot/initrd.img-4.14.94-odroidxu4 with 1.
      dpkg: error processing package initramfs-tools (--configure):
      subprocess installed post-installation script returned error exit status 1
      Errors were encountered while processing:
      initramfs-tools


      NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
      sda 8:0 0 3.7T 0 disk
      └─sda-crypt 254:0 0 3.7T 0 crypt /srv/dev-disk-by-label-WDRED4
      mmcblk1 179:0 0 29.7G 0 disk
      ├─mmcblk1p1 179:1 0 64M 0 part /boot
      ├─mmcblk1p2 179:2 0 7.3G 0 part /
      └─mmcblk1p3 179:3 0 22G 0 part
      zram0 252:0 0 124.8M 0 disk [SWAP]
      zram1 252:1 0 124.8M 0 disk [SWAP]
      zram2 252:2 0 124.8M 0 disk [SWAP]
      zram3 252:3 0 124.8M 0 disk [SWAP]
      zram4 252:4 0 124.8M 0 disk [SWAP]
      zram5 252:5 0 124.8M 0 disk [SWAP]
      zram6 252:6 0 124.8M 0 disk [SWAP]
      zram7 252:7 0 124.8M 0 disk [SWAP]
    • It is a fresh install?

      Then I'd reinstall. It might be possible to just install busybox and carry on, but something else might be wrong as well.

      Before you reinstall: Check the SD card to make sure it is not fake or bad.
      OMV 4, 7 x ODROID HC2, 1 x ODROID HC1, 3 x 12TB, 2 x 8TB, 1 x 4TB, 1 x 2TB SSHD, 1 x 500GB SSD, GbE, WiFi mesh
    • Again those issues. So sad - only errors at the beginning.

      Also the error with "kyle1117" stuff.

      Also the FTP checkbox showed a green sign. (FTP was not activated).
      EDIT: Apple Filling the same. Checkbox green even if not enabled.

      I had to enable/disable FTP - now it is ok and works like it should.


      So - again a new install? How could that be? And what about the "busybox" - must I install it by myself, what does busybox stand for?

      The post was edited 1 time, last by budpad: Apple Filling comment ().

    • It's coming when generally updating, or (recently) when installing the LUKS Plugin.

      Maybe it's because of a cronjob running in the background?

      The LUKS plugin made some error's too. Couldn't activate it with a password - had to restart OMV. After that it's working.

      Hopefully the plugin is running ok now? I need an encrypted HDD.

      The post was edited 1 time, last by budpad: some corrections ().

    • Make sure you get a fully updated, clean and error free install BEFORE you start configuring stuff.

      And preferably that you back it up as you go, so that you always can revert to an earlier perfect working root filesystem in case of further problems.

      As I see it there are three possibilities:

      Your SD card is bad.
      The install don't complete due to a bad internet connection.
      The install image has errors.

      I start to suspect that there are problems with the install image. Otherwise a reinstall would most likely have given different errors. :/

      I"ll download and do a fresh install and see if I get the same problems.
      OMV 4, 7 x ODROID HC2, 1 x ODROID HC1, 3 x 12TB, 2 x 8TB, 1 x 4TB, 1 x 2TB SSHD, 1 x 500GB SSD, GbE, WiFi mesh
    • macom wrote:

      So you get the busybox error on a fresh install when updating?
      Just like @troublem4keR reported at the start of this thread. When updating an Armbian kernel package initramfs-cleanup will be called and here the error messages seems to originate (no idea why).

      BTW: If anyone wants those annoying ppa.launchpad.net/kyle1117/ppa/ related messages to disappear you need to get in contact with Hardkernel. I did it the last time when problems occurred and they fixed the stuff within 2 days but I won't waste my time further on this manufacturer.
    • tkaiser wrote:

      Just like @troublem4keR reported at the start of this thread. When updating an Armbian kernel package initramfs-cleanup will be called and here the error messages seems to originate (no idea why).
      ... I won't waste my time further on this manufacturer.
      Thx. Will try it again.

      So you don't like the HC2 anymore? Thought it is a good device to use it with OMV?

      Is there any other (better) advice for hardware? Don't need big specs - but good running hardware. Or did I just misunderstood you?