I use ZFS and moved from a 2x4TB Mirror ZFS to a 6x2TB Z2 configuration. After moving my data I noticed that it's trying to resilver and the estimated time is 90 hours. I have about 4.5GB of actual data on it right now. It seems a little excessive. Would anyone comment as whether this speed is normal or whether this is slower than normal? I'm using a Dell H200 Raid Controller flashed with v20 LSI firmware in IT mode.
Code
tatus: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Fri Dec 28 01:29:16 2018
169G scanned out of 7.37T at 23.0M/s, 91h25m to go
53.8G resilvered, 2.24% done
config:
NAME STATE READ WRITE CKSUM
store1 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
ata-ST2000LM007-1R8174_WDZ9JM94 ONLINE 0 0 0
ata-ST2000LM007-1R8174_WDZ60MMX ONLINE 0 0 0
ata-ST2000LM007-1R8174_WDZ77P8L ONLINE 0 0 0
ata-ST2000LM007-1R8174_WDZ1KKQW ONLINE 0 0 0
ata-ST2000LM007-1R8174_WDZ8114Q ONLINE 0 0 0 (resilvering)
ata-ST2000LM007-1R8174_WDZ6X637 ONLINE 0 0 0 (resilvering)
Alles anzeigen