2 mobo sets

  • Hello,
    I have 2 mobo sets



    1.
    mobo and cpu: Asus J3455M-E
    RAM: 8GB DDR3 NON-ECC



    2.
    cpu: INTEL XEON L3406
    mobo: INTEL S3420GP
    RAM: 8GB DDR3 ECC



    Witch of these 2 sets will be less power comsumption and bether preformance. It will be only storage no virtualization, no extra plugins. HDD's will be connected to dell PERC H310 controller.

    • Offizieller Beitrag

    xeon is 30W TDP and celeron is 10W TDP not to mention the celeron is a much smaller lithography. ECC also uses more power. So, I would say the Asus would probably be considerably less power.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • mobo and cpu: Asus J3455M-E

    The PCI-E x16 slot on this board functions as a PCI-E 2.0 x1 electrically. So, while the PERC H310 (which has an x8 connector) will fit and will probably function in it, you'll have slow throughput if you connect more than a few drives. If you have a lot of drives, or you don't want bottlenecks with throughput, this may need to factor into your decision.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!