Hi guys,What do I do when I write a new image using a new sd card, when I start openmediavault, the screen stays started beep after system start?
some questions about openmediavault
-
-
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download. Also, how did you put the image on the card?Air Conditioners are a lot like PC's... They work great until you open Windows.
-
When I reboot, it shows me the raspberry PI login, but I can't control it from the web page
KM0201 wrote:
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download.
I used raspberry pi, a mirror image downloaded from the website -
-
When you say raspberry pi login, are you talking about the console login screen for OMV? If so, the username is root password is openmediavault
WARRIORS wrote:
When I reboot, it shows me the raspberry PI login, but I can't control it from the web pageI used raspberry pi, a mirror image downloaded from the websiteKM0201 wrote:
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download.
See if that lets you log inAir Conditioners are a lot like PC's... They work great until you open Windows.
-
I can log in, but the web control is still inaccessible
KM0201 wrote:
When you say raspberry pi login, are you talking about the console login screen for OMV? If so, the username is root password is openmediavaultWARRIORS wrote:
When I reboot, it shows me the raspberry PI login, but I can't control it from the web pageI used raspberry pi, a mirror image downloaded from the websiteKM0201 wrote:
A lot of times the arm versions, the first boot they take a few minutes to finish setting up during the first boot (I've saw some take as long as 15min)...
What device are you using and which image did you download.
See if that lets you log in
-
-
Is it inaccessible, or you can't find the IP?
WARRIORS wrote:
I can log in, but the web control is still inaccessible
Air Conditioners are a lot like PC's... They work great until you open Windows.
-
-
How do you try to access the web GUI?
Do you see the screen to enter your credentials?
EDIT: Ups, parallel post.Odroid HC2 - armbian - Seagate ST4000DM004 - OMV4.x
Asrock Q1900DC-ITX - 16GB - 2x Seagate ST3000VN000 - Intenso SSD 120GB - OMV4.x
Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide -
inaccessible
KM0201 wrote:
Is it inaccessible, or you can't find the IP?WARRIORS wrote:
I can log in, but the web control is still inaccessible
-
-
I see, there's also an IP address for login on the screen.
macom wrote:
How do you try to access the web GUI?
Do you see the screen to enter your credentials?
EDIT: Ups, parallel post.
-
So what happens when you try to login at the IP addressAir Conditioners are a lot like PC's... They work great until you open Windows.
-
-
Safari told me that the web page was inaccessible
KM0201 wrote:
So what happens when you try to login at the IP address
-
Log in to the console as I described to you earlier and run these commands one at a time, and install any updates..
apt-get update
apt-get upgrade
apt-get dist-upgrade
Then
reboot
To reboot the serverAir Conditioners are a lot like PC's... They work great until you open Windows.
-
-
Sorry, last one should be apt-get dist-upgrade
Then reboot.Air Conditioners are a lot like PC's... They work great until you open Windows.
-
okok。thank you
KM0201 wrote:
Sorry, last one should be apt-get dist-upgrade
Then reboot.
-
-
May I ask another question?When I checked the update on the control end of the webpage, the system prompt Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; apt-get update 2>&1' with exit code '100': Get:1 file:/var/cache/openmediavault/archives InRelease Ign:1 file:/var/cache/openmediavault/archives InRelease Get:2 file:/var/cache/openmediavault/archives Release Ign:2 What should I do?
KM0201 wrote:
Log in to the console as I described to you earlier and run these commands one at a time, and install any updates..
apt-get update
apt-get upgrade
apt-get dist-upgrade
Then
reboot
To reboot the server
-
That I'm not sure on... I've seen that error posted before, but I've never experienced it. Honestly I always update via command line over SSH.. I've not used the GUI update tool in so long I may be getting it..
Just checked... I'm not..Air Conditioners are a lot like PC's... They work great until you open Windows.
-
-
Well right as I posted that, a hit came up on Google.. did you have an issue while installing something?
Try logging in to the console (or SSH, if you've set it up).. and type
apt-get update
apt-get upgrade
apt-get -f installAir Conditioners are a lot like PC's... They work great until you open Windows.
-
Yes, I've had some problems checking for updates
KM0201 wrote:
Well right as I posted that, a hit came up on Google.. did you have an issue while installing something?
Try logging in to the console (or SSH, if you've set it up).. and type
apt-get update
apt-get upgrade
apt-get -f install
-