I have downloaded OMV version: OMV_4_Raspberry_Pi_2_3_3Plus.img.xz and installed on Pi3 micro sd with Etcher. Seems to hang at the line: "Started Daily apt upgrade and clean activities." The activity light blinks but never reboots. Have waited over night and did not finish. Any suggestions?
Install OMV on Raspberry
-
- OMV 4.x
- kenh
-
-
I have the same Problem.
I ran omv-firstaid and resetted the Network and the port setting.
But that is not a proper solution.
I just want to do a fresh and simple installation without problems.
-
I have noticed that on another thread that the problem may a slow SD card. Can't find the link now. I have a class 10 card in a security camera that I am going to try. Will let you know if it works.
-
I have a class 10 card
'Class 10' is irrelevant: https://github.com/ThomasKaise…_and_A2_rated_SD_cards.mdOften cards are simply just broken (or counterfeit) and buying and testing a good new one solves the problem...
-
Ok, ordered a new one and will let you know if the problem is solved..
Regards
-
as i thought it didnt work. i find out the raspberry hasnt any access to the internet ( i tried to ping e.g. google) but it gets an ip adress from the router. very strange..
i used the new the etcher version and the image from the sourceforge repo.
any suggestions?
-
i tried to ping e.g. google
Have you tried to ping an IP (e.g. 8.8.8.8)? If that works, most likely you only need to configure your DNS.
-
i think I tried an IP too.. I used my bypass (see above) to configure that.
But thanks for the reply
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!