Moinsen,
das NAS ist mit OMV auf einer 120GB SSD installiert die am internen USB3.0 Typ A port hängt. Soweit läuft alles gut. Aktuell ist NUR autoshutdown aktiviert mit folgenden Parametern: 4 Durchkäufe, Schlafen 180, Abschaltbefehl Herunterfahren. In meiner Energieverwaltung der Fritzbox kann ich sehen das das NAS aber NICHT herunter fährt, sondern ständig aktiv ist. Hab nun mal aktiv runter gefahren über OMV Befehl rechts oben --> herunterfahren. Er fährt runter und startet SOFORT wieder.
Angeschlossen sind momentan 2 HDD platten, spindownzeit 20min, sonst nix. NAS steht im Keller, da stört nix. Der Rest sind SSD´s. 1x NVMe Samsung und die Sytemplatte. Auf dem Board sind ein S-ATA Controller für 4 zusätzliche S-ATA Buchsen, ein USB Controller für mehr USB2.0 Steckplätze und eine Cine TV Karte eingesteckt. An den S-ATA hängt nix. An der TV Karte auch nix. Am USB hängen Maus und Tastatur.
Am Gehäuse USB steckt eine externe Festplatte für Datensicherung.
Wo liegt mein Fehler? Warum bekomme ich keinen Shutdown hin? Über die Netzwerkinterfaces habe ich WOL aktiviert. Aber es gibt ja keinen Zugriff.
Bite um Hilfe.
Matt
Hello,the NAS is installed with OMV on a 120GB SSD which hangs on the internal USB3.0 type A port. So far everything is going well. Currently ONLY autoshutdown is activated with the following parameters: 4 purchases, sleep 180, shutdown command: shutdown. In my power management in the Fritzbox I can see that the NAS isn´t shut down and constantly active. I shut it down actively with OMV command top right -> shut down. He drives down and starts again IMMEDIATELY.Connected are currently 2 HDD plates, Spindowntime 20min, otherwise nothing. NAS is in the basement, so no noise bothers. The rest are SSD's. 1x NVMe Samsung and the system tray. The board has an S-ATA controller plugged in for 4 additional S-ATA sockets, a USB controller for more USB2.0 slots and a Cine TV card. There is nothing on the S-ATA. On the TV card synonymous nothing. On the USB mouse and keyboard hang.The housing USB has an external hard disk for data backup connected.Where is my mistake? Why can not I get a shutdown? I have activated WOL via the network interfaces. But there is no access.Please help.Matt