after routine update - system generates errors..

    • OMV 4.x
    • Resolved
    • Update

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • after routine update - system generates errors..

      After a recent routing update for SMB - now nothing will upgrade, and any changes I make and then hit apply result in a failure to complete.

      Running the ZFS plugin,
      OMV version 4.1.21-1
      Kernal = Linux 4.15.18-12-pve

      Does this info help?? (I am not a Linux expert) ;)

      Source Code

      1. root@OMV2:~# apt-get -f install
      2. Reading package lists... Done
      3. Building dependency tree
      4. Reading state information... Done
      5. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
      6. 5 not fully installed or removed.
      7. After this operation, 0 B of additional disk space will be used.
      8. Setting up clamav-freshclam (0.100.3+dfsg-0+deb9u1) ...
      9. insserv: warning: current start runlevel(s) (empty) of script `clamav-freshclam' overrides LSB defaults (2 3 4 5).
      10. insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `clamav-freshclam' overrides LSB defaults (0 1 6).
      11. insserv: warning: script 'savecache' missing LSB tags and overrides
      12. insserv: There is a loop between service monit and savecache if stopped
      13. insserv: loop involving service savecache at depth 2
      14. insserv: loop involving service monit at depth 1
      15. insserv: Stopping savecache depends on monit and therefore on system facility `$all' which can not be true!
      16. insserv: exiting now without changing boot order!
      17. update-rc.d: error: insserv rejected the script header
      18. dpkg: error processing package clamav-freshclam (--configure):
      19. subprocess installed post-installation script returned error exit status 1
      20. Setting up udev (232-25+deb9u11) ...
      21. addgroup: The group `input' already exists as a system group. Exiting.
      22. update-initramfs: deferring update (trigger activated)
      23. insserv: warning: script 'savecache' missing LSB tags and overrides
      24. insserv: There is a loop between service monit and savecache if stopped
      25. insserv: loop involving service savecache at depth 2
      26. insserv: loop involving service monit at depth 1
      27. insserv: Stopping savecache depends on monit and therefore on system facility `$all' which can not be true!
      28. insserv: exiting now without changing boot order!
      29. update-rc.d: error: insserv rejected the script header
      30. dpkg: error processing package udev (--configure):
      31. subprocess installed post-installation script returned error exit status 1
      32. dpkg: dependency problems prevent configuration of clamav-daemon:
      33. clamav-daemon depends on clamav-freshclam (>= 0.100.3+dfsg) | clamav-data; however:
      34. Package clamav-freshclam is not configured yet.
      35. Package clamav-data is not installed.
      36. Package clamav-freshclam which provides clamav-data is not configured yet.
      37. dpkg: error processing package clamav-daemon (--configure):
      38. dependency problems - leaving unconfigured
      39. dpkg: dependency problems prevent configuration of openmediavault-clamav:
      40. openmediavault-clamav depends on clamav-daemon; however:
      41. Package clamav-daemon is not configured yet.
      42. openmediavault-clamav depends on clamav-freshclam; however:
      43. Package clamav-freshclam is not configured yet.
      44. dpkg: error processing package openmediavault-clamav (--configure):
      45. dependency problems - leaving unconfigured
      46. Setting up samba (2:4.5.16+dfsg-1+deb9u1) ...
      47. Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
      48. /usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
      49. insserv: warning: script 'savecache' missing LSB tags and overrides
      50. insserv: There is a loop between service monit and savecache if stopped
      51. insserv: loop involving service savecache at depth 2
      52. insserv: loop involving service monit at depth 1
      53. insserv: Stopping savecache depends on monit and therefore on system facility `$all' which can not be true!
      54. insserv: exiting now without changing boot order!
      55. update-rc.d: error: insserv rejected the script header
      56. dpkg: error processing package samba (--configure):
      57. subprocess installed post-installation script returned error exit status 1
      58. Processing triggers for initramfs-tools (0.130) ...
      59. update-initramfs: Generating /boot/initrd.img-4.15.18-12-pve
      60. W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
      61. Processing triggers for libc-bin (2.24-11+deb9u4) ...
      62. Errors were encountered while processing:
      63. clamav-freshclam
      64. udev
      65. clamav-daemon
      66. openmediavault-clamav
      67. samba
      68. E: Sub-process /usr/bin/dpkg returned an error code (1)
      69. root@OMV2:~#
      Display All

      The post was edited 1 time, last by WastlJ ().

    • Whatever you installed that uses the savecache service is causing the problem. You need to fix that.
      omv 4.1.22 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.15
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!