RAID1 over 5 disks? wtf? do a clonezilla backup after installing and configuring. A 5 disk RAID1 is way too overpowered.
Alltough I will create a feature request on the bugtracker for you later. (at work now)
Greetings
David
Why is raid 5 with 4 hard drives not enough? It will saturate a gigabit network.
David is saying raid 1 on 5 disks is too much. I wouldn't run a raid1 array on the same physical disks as a raid5 array either.
Zitat von "tekkbebe"Why is raid 5 with 4 hard drives not enough? It will saturate a gigabit network.
4 hdd It is not enough for me. 
I need 5 hdd (5x4TB).
OMV (Volker) seperates the OS from the data partitions for a reason. For normal Users it is way easier if the OS drive fails, or a data disk, to just replace the disk, than to care about such a 'weird' setup. Keep in mind that OMV is designed to be used in a SOHO environment! I would suggest to use another two, small disks in a RAID1 configuration if you need this redundancy. But I, personally, never would do it like you want to do!
Also on a side note, OMV can only create a single partition per disk/array. However OMV can manage multiple partitions per Disk if they were set up with the commandline or something like gparted/parted magic. So this is a normal behaviour.
Greetings
David
From what I can tell, yes.
Greetings
David
Never used this but it looks interesting for creating raid from single disk.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
