[RESOLVED] Can't delete shared folder and filesystem ?

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • [RESOLVED] Can't delete shared folder and filesystem ?

      After installing my internal mSATA in my N40-L as system drive I just play a little bit with the machine and
      try to learn a bit more of it's usage.

      I could mount the data drive, enabled SMB/CIFS , created a user and a filesystem (etx4). Worked fine.
      I can copy / delete data a.s.o.

      Then I tried to go backward. I wanted to erase all data, eliminate the user and filesystem and then unmount the
      data drive to unplug it.

      But I only could disable SMB/CIFS and delete the user. I can't delete the shared folder, the filesystem or unmount or delete
      the data drive ! ? These buttons are not lighted up.

      Why isn't that possible. If I take the drive out anyway I think I'll run in the same problem described here.

      forums.openmediavault.org/viewtopic.php?f=10&t=4332

      What I'm doing wrong ? For me it looks like the usage is not foolproof for a newbie like me.

      The post was edited 1 time, last by willri ().

    • Re: Can't delete shared folder and filesystem ?

      It should be foolproof with Kralizec. Please post the full config.xml here.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Here is the config file

      Source Code

      1. <?xml version="1.0" encoding="UTF-8"?>
      2. <config>
      3. <!-- Configuration version -->
      4. <version>0.1</version>
      5. <!-- System configuration - Do not add any configuration here -->
      6. <system>
      7. <apt>
      8. <distribution>
      9. <proposed>1</proposed>
      10. <partner>1</partner>
      11. </distribution>
      12. </apt>
      13. <powermanagement>
      14. <cpufreq>1</cpufreq>
      15. <powerbtn>0</powerbtn>
      16. </powermanagement>
      17. <time>
      18. <timezone>Europe/Berlin</timezone>
      19. <ntp>
      20. <enable>0</enable>
      21. <timeservers>pool.ntp.org</timeservers>
      22. </ntp>
      23. </time>
      24. <email>
      25. <!--
      26. <enable>0|1</enable>
      27. <tls>0|1</tls>
      28. -->
      29. <enable>0</enable>
      30. <server></server>
      31. <port>25</port>
      32. <tls>0</tls>
      33. <sender></sender>
      34. <authentication>
      35. <!--
      36. <enable>0|1</enable>
      37. -->
      38. <enable>0</enable>
      39. <username></username>
      40. <password></password>
      41. </authentication>
      42. <primaryemail></primaryemail>
      43. <secondaryemail></secondaryemail>
      44. </email>
      45. <notification>
      46. <notifications>
      47. <!--
      48. <xxx>0|1</xxx>
      49. -->
      50. <monitprocevents>1</monitprocevents>
      51. <monitloadavg>1</monitloadavg>
      52. <monitmemoryusage>1</monitmemoryusage>
      53. <monitcpuusage>1</monitcpuusage>
      54. <monitfilesystems>1</monitfilesystems>
      55. <mdadm>1</mdadm>
      56. <smartmontools>1</smartmontools>
      57. </notifications>
      58. </notification>
      59. <certificates>
      60. <!--
      61. <sslcertificate>
      62. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      63. <certificate>xxx</certificate>
      64. <privatekey>xxx</privatekey>
      65. <comment>xxx</comment>
      66. </sslcertificate>
      67. -->
      68. </certificates>
      69. <network>
      70. <hostname>N40L-NAS</hostname>
      71. <domainname>fritz.box</domainname>
      72. <interfaces>
      73. <!--
      74. <iface>
      75. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      76. <devicename>(eth|wlan)\d+</devicename>
      77. <method>dhcp|static|manual</method>
      78. <address>xxx.xxx.xxx.xxx</address>
      79. <netmask>xxx.xxx.xxx.xxx</netmask>
      80. <gateway>xxx.xxx.xxx.xxx</gateway>
      81. <method6>auto|static|manual</method6>
      82. <address6>xxxx:xxxx:...:xxxx</address6>
      83. <netmask6>0-128</netmask6>
      84. <gateway6>xxxx:xxxx:...:xxxx</gateway6>
      85. <mtu></mtu>
      86. <wol>0|1</wol>
      87. <options></options>
      88. <comment>xxx</comment>
      89. </iface>
      90. <bondiface>
      91. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      92. <devicename>bond\d+</devicename>
      93. <method>dhcp|static|manual</method>
      94. <address>xxx.xxx.xxx.xxx</address>
      95. <netmask>xxx.xxx.xxx.xxx</netmask>
      96. <gateway>xxx.xxx.xxx.xxx</gateway>
      97. <method6>auto|static|manual</method6>
      98. <address6>xxxx:xxxx:...:xxxx</address6>
      99. <netmask6>0-128</netmask6>
      100. <gateway6>xxxx:xxxx:...:xxxx</gateway6>
      101. <mtu></mtu>
      102. <wol>0|1</wol>
      103. <options></options>
      104. <comment>xxx</comment>
      105. <slaves>((eth|wlan)\d+,)*(eth|wlan)\d+</slaves>
      106. <bondprimary>(eth|wlan)\d+</bondprimary>
      107. <bondmode>0|1|2|3|4|5|6</bondmode>
      108. <bondmiimon>0</bondmiimon>
      109. <bonddowndelay>0</bonddowndelay>
      110. <bondupdelay>0</bondupdelay>
      111. </bondiface>
      112. -->
      113. <iface>
      114. <uuid>acd97912-fc98-11e3-a022-c70382ce430b</uuid>
      115. <devicename>eth0</devicename>
      116. <method>dhcp</method>
      117. <wol>0</wol>
      118. <address></address>
      119. <netmask></netmask>
      120. <gateway></gateway>
      121. <mtu></mtu>
      122. </iface>
      123. </interfaces>
      124. <hostac>
      125. <allow># /etc/hosts.allow: list of hosts that are allowed to access the system.
      126. # See the manual pages hosts_access(5) and hosts_options(5).
      127. #
      128. # Example: ALL: LOCAL @some_netgroup
      129. # ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
      130. #
      131. # If you're going to protect the portmapper use the name "portmap" for the
      132. # daemon name. Remember that you can only use the keyword "ALL" and IP
      133. # addresses (NOT host or domain names) for the portmapper, as well as for
      134. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      135. # for further information.
      136. #</allow>
      137. <deny># /etc/hosts.deny: list of hosts that are _not_ allowed to access the system.
      138. # See the manual pages hosts_access(5) and hosts_options(5).
      139. #
      140. # Example: ALL: some.host.name, .some.domain
      141. # ALL EXCEPT in.fingerd: other.host.name, .other.domain
      142. #
      143. # If you're going to protect the portmapper use the name "portmap" for the
      144. # daemon name. Remember that you can only use the keyword "ALL" and IP
      145. # addresses (NOT host or domain names) for the portmapper, as well as for
      146. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      147. # for further information.
      148. #
      149. # The PARANOID wildcard matches any host whose name does not match its
      150. # address.
      151. #
      152. # You may wish to enable this to ensure any programs that don't
      153. # validate looked up hostnames still leave understandable logs. In past
      154. # versions of Debian this has been the default.
      155. # ALL: PARANOID</deny>
      156. </hostac>
      157. <dnsnameservers></dnsnameservers>
      158. <iptables>
      159. <!--
      160. <rule>
      161. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      162. <family>inet|inet6</family>
      163. <rulenum>1...x</rulenum>
      164. <chain>INPUT|OUTPUT</chain>
      165. <action>ACCEPT|REJECT|DROP|LOG</action>
      166. <source>[!]?xxx.xxx.xxx.xxx|[!]?xxx.xxx.xxx.xxx/xx|xxx.xxx.xxx.xxx-yyy.yyy.yyy.yyy</source>
      167. <sport>xxx|xxx-yyy</sport>
      168. <destination>[!]?xxx.xxx.xxx.xxx|[!]?xxx.xxx.xxx.xxx/xx|xxx.xxx.xxx.xxx-yyy.yyy.yyy.yyy</destination>
      169. <dport>xxx|xxx-yyy</dport>
      170. <protocol>[!]?(tcp|udp|icmp|icmpv6)|all</protocol>
      171. <extraoptions>xxx</extraoptions>
      172. <comment>xxx</comment>
      173. </rule>
      174. -->
      175. </iptables>
      176. </network>
      177. <usermanagement>
      178. <homedirectory>
      179. <enable>1</enable>
      180. <sharedfolderref>faa69d03-4593-4cf9-bfef-c9880f5106fa</sharedfolderref>
      181. </homedirectory>
      182. <users>
      183. <!--
      184. <user>
      185. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      186. <name>xxx</name>
      187. <email>xxx</email>
      188. <disallowusermod>0</disallowusermod>
      189. </user>
      190. -->
      191. </users>
      192. <groups>
      193. <!--
      194. <group>
      195. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      196. <name>xxx</name>
      197. <comment>xxx</comment>
      198. </group>
      199. -->
      200. </groups>
      201. </usermanagement>
      202. <crontab>
      203. <!--
      204. <job>
      205. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      206. <enable>0|1</enable>
      207. <sendemail>0|1<sendemail>
      208. <type>reboot|shutdown|userdefined</type>
      209. <comment>xxx</comment>
      210. <minute>[00-59|*]</minute>
      211. <everynminute>0|1</everynminute>
      212. <hour>[00-23|*]</hour>
      213. <everynhour>0|1</everynhour>
      214. <dayofmonth>[01-31|*]</dayofmonth>
      215. <everyndayofmonth>0|1</everyndayofmonth>
      216. <month>[01-12|*]</month>
      217. <dayofweek>[1-7|*]</dayofweek>
      218. <username>xxx</username>
      219. <command>xxx</command>
      220. </job>
      221. -->
      222. </crontab>
      223. <syslog>
      224. <remote>
      225. <!--
      226. <protocol>udp|tcp</protocol>
      227. -->
      228. <enable>0</enable>
      229. <host></host>
      230. <port>514</port>
      231. <protocol>udp</protocol>
      232. </remote>
      233. </syslog>
      234. <storage>
      235. <!--
      236. <hdparm>
      237. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      238. <devicefile>/dev/xxx</devicefile>
      239. <apm>0 = disable|1-255<apm>
      240. <aam>0|128|254</aam>
      241. <spindowntime>0 = disabled|1-254</spindowntime>
      242. <writecache>0|1</writecache>
      243. </hdparm>
      244. -->
      245. <filesystem>
      246. <!--
      247. <quota>
      248. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      249. <fsuuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx</fsuuid>
      250. <usrquota>
      251. <name>xxx</name>
      252. <bsoftlimit>0</bsoftlimit>
      253. <bhardlimit>xxx</bhardlimit>
      254. <isoftlimit>0</isoftlimit>
      255. <ihardlimit>0</ihardlimit>
      256. </usrquota>
      257. <usrquota>
      258. ...
      259. </usrquota>
      260. <grpquota>
      261. <name>xxx</name>
      262. <bsoftlimit>0</bsoftlimit>
      263. <bhardlimit>xxx</bhardlimit>
      264. <isoftlimit>0</isoftlimit>
      265. <ihardlimit>0</ihardlimit>
      266. </grpquota>
      267. <grpquota>
      268. ...
      269. </grpquota>
      270. </quota>
      271. <quota>
      272. ...
      273. </quota>
      274. -->
      275. </filesystem>
      276. </storage>
      277. <fstab>
      278. <!--
      279. <mntent>
      280. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      281. <fsname>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx|/dev/xxx</fsname>
      282. <dir>/xxx/yyy/zzz</dir>
      283. <type>ext2|ext3|ext4|xfs|jfs|iso9660|udf</type>
      284. <opts></opts>
      285. <freq>0</freq>
      286. <passno>0|1|2</passno>
      287. </mntent>
      288. -->
      289. <mntent>
      290. <uuid>8a4bce61-fc02-463c-ba29-ef2b096958ee</uuid>
      291. <fsname>8a4e55b9-b64a-443d-a4c7-ac638709c233</fsname>
      292. <dir>/media/8a4e55b9-b64a-443d-a4c7-ac638709c233</dir>
      293. <type>ext4</type>
      294. <opts>defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0</opts>
      295. <freq>0</freq>
      296. <passno>2</passno>
      297. </mntent>
      298. </fstab>
      299. <shares>
      300. <!--
      301. <sharedfolder>
      302. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      303. <name>xxx</name>
      304. <comment>xxx</comment>
      305. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      306. <reldirpath>xxx</reldirpath>
      307. <privileges>
      308. <privilege>
      309. <type>user|group</type>
      310. <name>xxx</name>
      311. <perms>0 = no permission|5 = read and execute|7 = read, write and execute</perms>
      312. </privilege>
      313. </privileges>
      314. </sharedfolder>
      315. -->
      316. <sharedfolder>
      317. <uuid>faa69d03-4593-4cf9-bfef-c9880f5106fa</uuid>
      318. <name>Daten-R</name>
      319. <comment></comment>
      320. <mntentref>8a4bce61-fc02-463c-ba29-ef2b096958ee</mntentref>
      321. <reldirpath>/Daten-R</reldirpath>
      322. <privileges>
      323. <privilege>
      324. <type>user</type>
      325. <name>Test</name>
      326. <perms>7</perms>
      327. </privilege>
      328. </privileges>
      329. </sharedfolder>
      330. </shares>
      331. <omvextrasorg>
      332. <enable>1</enable>
      333. <testing>0</testing>
      334. <developer>n/a</developer>
      335. <vbox>0</vbox>
      336. <plex>0</plex>
      337. <greyhole>0</greyhole>
      338. <vdr>0</vdr>
      339. <miller>0</miller>
      340. <millertesting>0</millertesting>
      341. <btsync>0</btsync>
      342. <beta>0</beta>
      343. <dotdeb>0</dotdeb>
      344. <debmm>0</debmm>
      345. <debmmbp>0</debmmbp>
      346. <repos></repos>
      347. <mariadb>0</mariadb>
      348. <vpn>0</vpn>
      349. <zfs>0</zfs>
      350. </omvextrasorg>
      351. </system>
      352. <!-- Web administration configuration - Do not add any configuration here -->
      353. <webadmin>
      354. <port>80</port>
      355. <enablessl>0</enablessl>
      356. <sslport>443</sslport>
      357. <forcesslonly>0</forcesslonly>
      358. <sslcertificateref></sslcertificateref>
      359. <timeout>5</timeout>
      360. </webadmin>
      361. <!-- Plugin configuration area -->
      362. <services>
      363. <ssh>
      364. <enable>1</enable>
      365. <port>22</port>
      366. <extraoptions></extraoptions>
      367. <passwordauthentication>1</passwordauthentication>
      368. <permitrootlogin>1</permitrootlogin>
      369. <tcpforwarding>0</tcpforwarding>
      370. <compression>0</compression>
      371. </ssh>
      372. <nfs>
      373. <enable>0</enable>
      374. <numproc>8</numproc>
      375. <shares>
      376. <!--
      377. <share>
      378. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      379. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      380. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      381. <client>xxx.xxx.xxx.xxx/xx|xxxxxxxxx</client>
      382. <options>xxx,xxx,xxx</options>
      383. <extraoptions></extraoptions>
      384. <comment>xxx</comment>
      385. </share>
      386. -->
      387. </shares>
      388. </nfs>
      389. <ftp>
      390. <enable>0</enable>
      391. <port>21</port>
      392. <maxclients>5</maxclients>
      393. <maxconnectionsperhost>2</maxconnectionsperhost>
      394. <maxloginattempts>1</maxloginattempts>
      395. <timeoutidle>1200</timeoutidle>
      396. <displaylogin></displaylogin>
      397. <allowforeignaddress>0</allowforeignaddress>
      398. <allowrestart>0</allowrestart>
      399. <identlookups>0</identlookups>
      400. <usereversedns>0</usereversedns>
      401. <rootlogin>0</rootlogin>
      402. <masqueradeaddress></masqueradeaddress>
      403. <dynmasqrefresh>0</dynmasqrefresh>
      404. <usepassiveports>0</usepassiveports>
      405. <minpassiveports>49152</minpassiveports>
      406. <maxpassiveports>65534</maxpassiveports>
      407. <limittransferrate>0</limittransferrate>
      408. <maxuptransferrate>0</maxuptransferrate>
      409. <maxdowntransferrate>0</maxdowntransferrate>
      410. <anonymous>0</anonymous>
      411. <requirevalidshell>1</requirevalidshell>
      412. <transferlog>0</transferlog>
      413. <extraoptions></extraoptions>
      414. <shares>
      415. <!--
      416. <share>
      417. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      418. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      419. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      420. <comment>xxx</comment>
      421. </share>
      422. -->
      423. </shares>
      424. <modules>
      425. <mod_ban>
      426. <!--
      427. <rule>
      428. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      429. <event>AnonRejectPasswords|ClientConnectRate|MaxClientsPerClass|MaxClientsPerHost|MaxClientsPerUser|MaxConnectionsPerHost|MaxHostsPerUser|MaxLoginAttempts|TimeoutIdle|TimeoutNoTransfer</event>
      430. <occurrence>xxx</occurrence>
      431. <timeinterval>hh:mm:ss</timeinterval>
      432. <expire>hh:mm:ss</expire>
      433. </rule>
      434. -->
      435. </mod_ban>
      436. <mod_tls>
      437. <enable>0</enable>
      438. <required>0</required>
      439. <sslcertificateref></sslcertificateref>
      440. <nocertrequest>0</nocertrequest>
      441. <nosessionreuserequired>0</nosessionreuserequired>
      442. <useimplicitssl>0</useimplicitssl>
      443. <extraoptions></extraoptions>
      444. </mod_tls>
      445. </modules>
      446. </ftp>
      447. <smart>
      448. <enable>1</enable>
      449. <interval>1800</interval>
      450. <powermode>never</powermode>
      451. <tempdiff>0</tempdiff>
      452. <tempinfo>0</tempinfo>
      453. <tempcrit>0</tempcrit>
      454. <monitor>
      455. <device>
      456. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      457. <devicefile>/dev/xxx</devicefile>
      458. <enable>0|1</enable>
      459. <type>|sat|cciss|xxx</type>
      460. </device>
      461. <device>
      462. <uuid>dd7dba0a-6c12-4260-8530-e7e952489425</uuid>
      463. <devicefile>/dev/disk/by-id/wwn-0x50014ee10034c3da</devicefile>
      464. <enable>1</enable>
      465. <type></type>
      466. </device>
      467. </monitor>
      468. <scheduledtests></scheduledtests>
      469. </smart>
      470. <tftp>
      471. <!--
      472. <blocksize>[512-65464]</blocksize>
      473. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      474. -->
      475. <enable>0</enable>
      476. <port>69</port>
      477. <retransmit>1000000</retransmit>
      478. <blocksize>512</blocksize>
      479. <allownewfiles>0</allownewfiles>
      480. <sharedfolderref></sharedfolderref>
      481. <extraoptions></extraoptions>
      482. </tftp>
      483. <smb>
      484. <enable>0</enable>
      485. <workgroup>MSHEIMNETZ</workgroup>
      486. <serverstring>%h server</serverstring>
      487. <loglevel>0</loglevel>
      488. <usesendfile>1</usesendfile>
      489. <aio>1</aio>
      490. <nullpasswords>1</nullpasswords>
      491. <localmaster>1</localmaster>
      492. <timeserver>0</timeserver>
      493. <winssupport>0</winssupport>
      494. <winsserver></winsserver>
      495. <homesenable>0</homesenable>
      496. <homesbrowseable>1</homesbrowseable>
      497. <extraoptions></extraoptions>
      498. <shares></shares>
      499. </smb>
      500. <rsync>
      501. <server>
      502. <enable>0</enable>
      503. <port>873</port>
      504. <extraoptions></extraoptions>
      505. <modules>
      506. <!--
      507. <module>
      508. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      509. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      510. <uid>xxx</uid>
      511. <gid>xxx</gid>
      512. <name>xxx</name>
      513. <comment>xxx</comment>
      514. <readonly>0</readonly>
      515. <writeonly>0</writeonly>
      516. <maxconnections>0</maxconnections>
      517. <list>1</list>
      518. <hostsallow></hostsallow>
      519. <hostsdeny></hostsdeny>
      520. <extraoptions></extraoptions>
      521. <authusers>0|1</authusers>
      522. <usechroot>0|1</usechroot>
      523. <users>
      524. <user>
      525. <name>xxx</name>
      526. <password>xxx</password>
      527. <user>
      528. <users>
      529. </module>
      530. -->
      531. </modules>
      532. </server>
      533. <jobs>
      534. <!--
      535. <job>
      536. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      537. <enable>0|1</enable>
      538. <sendemail>0|1<sendemail>
      539. <comment>xxx</comment>
      540. <type>local|remote</type>
      541. <src>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</src>
      542. <dest>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</dest>
      543. <minute>[00-59|*]</minute>
      544. <everynminute>0|1</everynminute>
      545. <hour>[00-23|*]</hour>
      546. <everynhour>0|1</everynhour>
      547. <dayofmonth>[01-31|*]</dayofmonth>
      548. <everyndayofmonth>0|1</everyndayofmonth>
      549. <month>[01-12|*]</month>
      550. <dayofweek>[1-7|*]</dayofweek>
      551. <recursive>1</recursive>
      552. <times>1</times>
      553. <compress>0</compress>
      554. <archive>1</archive>
      555. <delete>0</delete>
      556. <quiet>0</quiet>
      557. <perms>1</perms>
      558. <acls>1</acls>
      559. <xattrs>0</xattrs>
      560. <dryrun>0</dryrun>
      561. <partial>0</partial>
      562. <extraoptions></extraoptions>
      563. // remote
      564. <mode>push|pull</mode>
      565. <password>xxx</password>
      566. </job>
      567. -->
      568. </jobs>
      569. </rsync>
      570. <snmp>
      571. <!--
      572. <version>2c|3</version>
      573. <securitylevel>noauth|auth|priv</securitylevel>
      574. <authtype>MD5|SHA</authtype>
      575. <privtype>DES|AES</privtype>
      576. -->
      577. <enable>0</enable>
      578. <community>public</community>
      579. <syslocation></syslocation>
      580. <syscontact></syscontact>
      581. <version>2c</version>
      582. <username></username>
      583. <securitylevel>noauth</securitylevel>
      584. <authtype>MD5</authtype>
      585. <authpassphrase></authpassphrase>
      586. <privtype>DES</privtype>
      587. <privpassphrase></privpassphrase>
      588. <extraoptions></extraoptions>
      589. <trap>
      590. <enable>0</enable>
      591. <community>public</community>
      592. <host>localhost</host>
      593. <port>162</port>
      594. </trap>
      595. </snmp>
      596. <zeroconf>
      597. <services>
      598. <!--
      599. <service>
      600. <id>xxx</id>
      601. <enable>0|1</enable>
      602. <name>xxx</name>
      603. </service>
      604. -->
      605. <service>
      606. <id>webadmin</id>
      607. <enable>1</enable>
      608. <name>%h - Web administration</name>
      609. </service>
      610. <service>
      611. <id>ssh</id>
      612. <enable>1</enable>
      613. <name>%h - SSH</name>
      614. </service>
      615. <service>
      616. <id>nfs</id>
      617. <enable>1</enable>
      618. <name>%h - NFS</name>
      619. </service>
      620. <service>
      621. <id>ftp</id>
      622. <enable>1</enable>
      623. <name>%h - FTP</name>
      624. </service>
      625. <service>
      626. <id>tftp</id>
      627. <enable>1</enable>
      628. <name>%h - TFTP</name>
      629. </service>
      630. <service>
      631. <id>smb</id>
      632. <enable>1</enable>
      633. <name>%h - SMB/CIFS</name>
      634. </service>
      635. <service>
      636. <id>rsync</id>
      637. <enable>1</enable>
      638. <name>%h - Rsync</name>
      639. </service>
      640. </services>
      641. </zeroconf>
      642. </services>
      643. </config>
      644. Rendering Time: 0.19012308120728 Sec.
      Display All
    • Re: Can't delete shared folder and filesystem ?

      Hehe, you tricked yourself. You enabled Home Folders, so you have to disable them too.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      .

      No, I Think I've not tricked myself. Whether "home directories" was enabled or disabled it doesn't work . I think all subsequent selections to "General Settings - Enable " are not active when "Enable is not selected. Isn't it this way ?

      Do you need code of config again with "home directories" also disabled ?

      Bcs till now I don't use OMV productive , I'll wait for OMV 0.6 or 1.0
    • Re: Can't delete shared folder and filesystem ?

      It's active in your config above. Post the config again when you disabled it in the GUI.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Here the new config

      Source Code

      1. <?xml version="1.0" encoding="UTF-8"?>
      2. <config>
      3. <!-- Configuration version -->
      4. <version>0.1</version>
      5. <!-- System configuration - Do not add any configuration here -->
      6. <system>
      7. <apt>
      8. <distribution>
      9. <proposed>1</proposed>
      10. <partner>1</partner>
      11. </distribution>
      12. </apt>
      13. <powermanagement>
      14. <cpufreq>1</cpufreq>
      15. <powerbtn>0</powerbtn>
      16. </powermanagement>
      17. <time>
      18. <timezone>Europe/Berlin</timezone>
      19. <ntp>
      20. <enable>0</enable>
      21. <timeservers>pool.ntp.org</timeservers>
      22. </ntp>
      23. </time>
      24. <email>
      25. <!--
      26. <enable>0|1</enable>
      27. <tls>0|1</tls>
      28. -->
      29. <enable>0</enable>
      30. <server></server>
      31. <port>25</port>
      32. <tls>0</tls>
      33. <sender></sender>
      34. <authentication>
      35. <!--
      36. <enable>0|1</enable>
      37. -->
      38. <enable>0</enable>
      39. <username></username>
      40. <password></password>
      41. </authentication>
      42. <primaryemail></primaryemail>
      43. <secondaryemail></secondaryemail>
      44. </email>
      45. <notification>
      46. <notifications>
      47. <!--
      48. <xxx>0|1</xxx>
      49. -->
      50. <monitprocevents>1</monitprocevents>
      51. <monitloadavg>1</monitloadavg>
      52. <monitmemoryusage>1</monitmemoryusage>
      53. <monitcpuusage>1</monitcpuusage>
      54. <monitfilesystems>1</monitfilesystems>
      55. <mdadm>1</mdadm>
      56. <smartmontools>1</smartmontools>
      57. </notifications>
      58. </notification>
      59. <certificates>
      60. <!--
      61. <sslcertificate>
      62. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      63. <certificate>xxx</certificate>
      64. <privatekey>xxx</privatekey>
      65. <comment>xxx</comment>
      66. </sslcertificate>
      67. -->
      68. </certificates>
      69. <network>
      70. <hostname>N40L-NAS</hostname>
      71. <domainname>fritz.box</domainname>
      72. <interfaces>
      73. <!--
      74. <iface>
      75. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      76. <devicename>(eth|wlan)\d+</devicename>
      77. <method>dhcp|static|manual</method>
      78. <address>xxx.xxx.xxx.xxx</address>
      79. <netmask>xxx.xxx.xxx.xxx</netmask>
      80. <gateway>xxx.xxx.xxx.xxx</gateway>
      81. <method6>auto|static|manual</method6>
      82. <address6>xxxx:xxxx:...:xxxx</address6>
      83. <netmask6>0-128</netmask6>
      84. <gateway6>xxxx:xxxx:...:xxxx</gateway6>
      85. <mtu></mtu>
      86. <wol>0|1</wol>
      87. <options></options>
      88. <comment>xxx</comment>
      89. </iface>
      90. <bondiface>
      91. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      92. <devicename>bond\d+</devicename>
      93. <method>dhcp|static|manual</method>
      94. <address>xxx.xxx.xxx.xxx</address>
      95. <netmask>xxx.xxx.xxx.xxx</netmask>
      96. <gateway>xxx.xxx.xxx.xxx</gateway>
      97. <method6>auto|static|manual</method6>
      98. <address6>xxxx:xxxx:...:xxxx</address6>
      99. <netmask6>0-128</netmask6>
      100. <gateway6>xxxx:xxxx:...:xxxx</gateway6>
      101. <mtu></mtu>
      102. <wol>0|1</wol>
      103. <options></options>
      104. <comment>xxx</comment>
      105. <slaves>((eth|wlan)\d+,)*(eth|wlan)\d+</slaves>
      106. <bondprimary>(eth|wlan)\d+</bondprimary>
      107. <bondmode>0|1|2|3|4|5|6</bondmode>
      108. <bondmiimon>0</bondmiimon>
      109. <bonddowndelay>0</bonddowndelay>
      110. <bondupdelay>0</bondupdelay>
      111. </bondiface>
      112. -->
      113. <iface>
      114. <uuid>acd97912-fc98-11e3-a022-c70382ce430b</uuid>
      115. <devicename>eth0</devicename>
      116. <method>dhcp</method>
      117. <wol>0</wol>
      118. <address></address>
      119. <netmask></netmask>
      120. <gateway></gateway>
      121. <mtu></mtu>
      122. </iface>
      123. </interfaces>
      124. <hostac>
      125. <allow># /etc/hosts.allow: list of hosts that are allowed to access the system.
      126. # See the manual pages hosts_access(5) and hosts_options(5).
      127. #
      128. # Example: ALL: LOCAL @some_netgroup
      129. # ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
      130. #
      131. # If you're going to protect the portmapper use the name "portmap" for the
      132. # daemon name. Remember that you can only use the keyword "ALL" and IP
      133. # addresses (NOT host or domain names) for the portmapper, as well as for
      134. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      135. # for further information.
      136. #</allow>
      137. <deny># /etc/hosts.deny: list of hosts that are _not_ allowed to access the system.
      138. # See the manual pages hosts_access(5) and hosts_options(5).
      139. #
      140. # Example: ALL: some.host.name, .some.domain
      141. # ALL EXCEPT in.fingerd: other.host.name, .other.domain
      142. #
      143. # If you're going to protect the portmapper use the name "portmap" for the
      144. # daemon name. Remember that you can only use the keyword "ALL" and IP
      145. # addresses (NOT host or domain names) for the portmapper, as well as for
      146. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      147. # for further information.
      148. #
      149. # The PARANOID wildcard matches any host whose name does not match its
      150. # address.
      151. #
      152. # You may wish to enable this to ensure any programs that don't
      153. # validate looked up hostnames still leave understandable logs. In past
      154. # versions of Debian this has been the default.
      155. # ALL: PARANOID</deny>
      156. </hostac>
      157. <dnsnameservers></dnsnameservers>
      158. <iptables>
      159. <!--
      160. <rule>
      161. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      162. <family>inet|inet6</family>
      163. <rulenum>1...x</rulenum>
      164. <chain>INPUT|OUTPUT</chain>
      165. <action>ACCEPT|REJECT|DROP|LOG</action>
      166. <source>[!]?xxx.xxx.xxx.xxx|[!]?xxx.xxx.xxx.xxx/xx|xxx.xxx.xxx.xxx-yyy.yyy.yyy.yyy</source>
      167. <sport>xxx|xxx-yyy</sport>
      168. <destination>[!]?xxx.xxx.xxx.xxx|[!]?xxx.xxx.xxx.xxx/xx|xxx.xxx.xxx.xxx-yyy.yyy.yyy.yyy</destination>
      169. <dport>xxx|xxx-yyy</dport>
      170. <protocol>[!]?(tcp|udp|icmp|icmpv6)|all</protocol>
      171. <extraoptions>xxx</extraoptions>
      172. <comment>xxx</comment>
      173. </rule>
      174. -->
      175. </iptables>
      176. </network>
      177. <usermanagement>
      178. <homedirectory>
      179. <enable>0</enable>
      180. <sharedfolderref>faa69d03-4593-4cf9-bfef-c9880f5106fa</sharedfolderref>
      181. </homedirectory>
      182. <users>
      183. <!--
      184. <user>
      185. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      186. <name>xxx</name>
      187. <email>xxx</email>
      188. <disallowusermod>0</disallowusermod>
      189. </user>
      190. -->
      191. </users>
      192. <groups>
      193. <!--
      194. <group>
      195. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      196. <name>xxx</name>
      197. <comment>xxx</comment>
      198. </group>
      199. -->
      200. </groups>
      201. </usermanagement>
      202. <crontab>
      203. <!--
      204. <job>
      205. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      206. <enable>0|1</enable>
      207. <sendemail>0|1<sendemail>
      208. <type>reboot|shutdown|userdefined</type>
      209. <comment>xxx</comment>
      210. <minute>[00-59|*]</minute>
      211. <everynminute>0|1</everynminute>
      212. <hour>[00-23|*]</hour>
      213. <everynhour>0|1</everynhour>
      214. <dayofmonth>[01-31|*]</dayofmonth>
      215. <everyndayofmonth>0|1</everyndayofmonth>
      216. <month>[01-12|*]</month>
      217. <dayofweek>[1-7|*]</dayofweek>
      218. <username>xxx</username>
      219. <command>xxx</command>
      220. </job>
      221. -->
      222. </crontab>
      223. <syslog>
      224. <remote>
      225. <!--
      226. <protocol>udp|tcp</protocol>
      227. -->
      228. <enable>0</enable>
      229. <host></host>
      230. <port>514</port>
      231. <protocol>udp</protocol>
      232. </remote>
      233. </syslog>
      234. <storage>
      235. <!--
      236. <hdparm>
      237. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      238. <devicefile>/dev/xxx</devicefile>
      239. <apm>0 = disable|1-255<apm>
      240. <aam>0|128|254</aam>
      241. <spindowntime>0 = disabled|1-254</spindowntime>
      242. <writecache>0|1</writecache>
      243. </hdparm>
      244. -->
      245. <filesystem>
      246. <!--
      247. <quota>
      248. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      249. <fsuuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx</fsuuid>
      250. <usrquota>
      251. <name>xxx</name>
      252. <bsoftlimit>0</bsoftlimit>
      253. <bhardlimit>xxx</bhardlimit>
      254. <isoftlimit>0</isoftlimit>
      255. <ihardlimit>0</ihardlimit>
      256. </usrquota>
      257. <usrquota>
      258. ...
      259. </usrquota>
      260. <grpquota>
      261. <name>xxx</name>
      262. <bsoftlimit>0</bsoftlimit>
      263. <bhardlimit>xxx</bhardlimit>
      264. <isoftlimit>0</isoftlimit>
      265. <ihardlimit>0</ihardlimit>
      266. </grpquota>
      267. <grpquota>
      268. ...
      269. </grpquota>
      270. </quota>
      271. <quota>
      272. ...
      273. </quota>
      274. -->
      275. </filesystem>
      276. </storage>
      277. <fstab>
      278. <!--
      279. <mntent>
      280. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      281. <fsname>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx|/dev/xxx</fsname>
      282. <dir>/xxx/yyy/zzz</dir>
      283. <type>ext2|ext3|ext4|xfs|jfs|iso9660|udf</type>
      284. <opts></opts>
      285. <freq>0</freq>
      286. <passno>0|1|2</passno>
      287. </mntent>
      288. -->
      289. <mntent>
      290. <uuid>8a4bce61-fc02-463c-ba29-ef2b096958ee</uuid>
      291. <fsname>8a4e55b9-b64a-443d-a4c7-ac638709c233</fsname>
      292. <dir>/media/8a4e55b9-b64a-443d-a4c7-ac638709c233</dir>
      293. <type>ext4</type>
      294. <opts>defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0</opts>
      295. <freq>0</freq>
      296. <passno>2</passno>
      297. </mntent>
      298. </fstab>
      299. <shares>
      300. <!--
      301. <sharedfolder>
      302. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      303. <name>xxx</name>
      304. <comment>xxx</comment>
      305. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      306. <reldirpath>xxx</reldirpath>
      307. <privileges>
      308. <privilege>
      309. <type>user|group</type>
      310. <name>xxx</name>
      311. <perms>0 = no permission|5 = read and execute|7 = read, write and execute</perms>
      312. </privilege>
      313. </privileges>
      314. </sharedfolder>
      315. -->
      316. <sharedfolder>
      317. <uuid>faa69d03-4593-4cf9-bfef-c9880f5106fa</uuid>
      318. <name>Daten-R</name>
      319. <comment></comment>
      320. <mntentref>8a4bce61-fc02-463c-ba29-ef2b096958ee</mntentref>
      321. <reldirpath>/Daten-R</reldirpath>
      322. <privileges>
      323. <privilege>
      324. <type>user</type>
      325. <name>Test</name>
      326. <perms>7</perms>
      327. </privilege>
      328. </privileges>
      329. </sharedfolder>
      330. </shares>
      331. <omvextrasorg>
      332. <enable>0</enable>
      333. <testing>1</testing>
      334. <developer>n/a</developer>
      335. <vbox>0</vbox>
      336. <plex>0</plex>
      337. <greyhole>0</greyhole>
      338. <vdr>0</vdr>
      339. <miller>0</miller>
      340. <millertesting>0</millertesting>
      341. <btsync>0</btsync>
      342. <vpn>0</vpn>
      343. <zfs>0</zfs>
      344. <beta>0</beta>
      345. <dotdeb>0</dotdeb>
      346. <debmm>0</debmm>
      347. <debmmbp>0</debmmbp>
      348. <mariadb>0</mariadb>
      349. <repos></repos>
      350. </omvextrasorg>
      351. </system>
      352. <!-- Web administration configuration - Do not add any configuration here -->
      353. <webadmin>
      354. <port>80</port>
      355. <enablessl>0</enablessl>
      356. <sslport>443</sslport>
      357. <forcesslonly>0</forcesslonly>
      358. <sslcertificateref></sslcertificateref>
      359. <timeout>0</timeout>
      360. <dnssd>
      361. <enable>0</enable>
      362. <name></name>
      363. </dnssd>
      364. </webadmin>
      365. <!-- Plugin configuration area -->
      366. <services>
      367. <ssh>
      368. <enable>1</enable>
      369. <port>22</port>
      370. <extraoptions></extraoptions>
      371. <passwordauthentication>1</passwordauthentication>
      372. <permitrootlogin>1</permitrootlogin>
      373. <tcpforwarding>0</tcpforwarding>
      374. <compression>0</compression>
      375. </ssh>
      376. <nfs>
      377. <enable>0</enable>
      378. <numproc>8</numproc>
      379. <shares>
      380. <!--
      381. <share>
      382. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      383. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      384. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      385. <client>xxx.xxx.xxx.xxx/xx|xxxxxxxxx</client>
      386. <options>xxx,xxx,xxx</options>
      387. <extraoptions></extraoptions>
      388. <comment>xxx</comment>
      389. </share>
      390. -->
      391. </shares>
      392. </nfs>
      393. <ftp>
      394. <enable>0</enable>
      395. <port>21</port>
      396. <maxclients>5</maxclients>
      397. <maxconnectionsperhost>2</maxconnectionsperhost>
      398. <maxloginattempts>1</maxloginattempts>
      399. <timeoutidle>1200</timeoutidle>
      400. <displaylogin></displaylogin>
      401. <allowforeignaddress>0</allowforeignaddress>
      402. <allowrestart>0</allowrestart>
      403. <identlookups>0</identlookups>
      404. <usereversedns>0</usereversedns>
      405. <rootlogin>0</rootlogin>
      406. <masqueradeaddress></masqueradeaddress>
      407. <dynmasqrefresh>0</dynmasqrefresh>
      408. <usepassiveports>0</usepassiveports>
      409. <minpassiveports>49152</minpassiveports>
      410. <maxpassiveports>65534</maxpassiveports>
      411. <limittransferrate>0</limittransferrate>
      412. <maxuptransferrate>0</maxuptransferrate>
      413. <maxdowntransferrate>0</maxdowntransferrate>
      414. <anonymous>0</anonymous>
      415. <requirevalidshell>1</requirevalidshell>
      416. <transferlog>0</transferlog>
      417. <extraoptions></extraoptions>
      418. <shares>
      419. <!--
      420. <share>
      421. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      422. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      423. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      424. <comment>xxx</comment>
      425. </share>
      426. -->
      427. </shares>
      428. <modules>
      429. <mod_ban>
      430. <!--
      431. <rule>
      432. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      433. <event>AnonRejectPasswords|ClientConnectRate|MaxClientsPerClass|MaxClientsPerHost|MaxClientsPerUser|MaxConnectionsPerHost|MaxHostsPerUser|MaxLoginAttempts|TimeoutIdle|TimeoutNoTransfer</event>
      434. <occurrence>xxx</occurrence>
      435. <timeinterval>hh:mm:ss</timeinterval>
      436. <expire>hh:mm:ss</expire>
      437. </rule>
      438. -->
      439. </mod_ban>
      440. <mod_tls>
      441. <enable>0</enable>
      442. <required>0</required>
      443. <sslcertificateref></sslcertificateref>
      444. <nocertrequest>0</nocertrequest>
      445. <nosessionreuserequired>0</nosessionreuserequired>
      446. <useimplicitssl>0</useimplicitssl>
      447. <extraoptions></extraoptions>
      448. </mod_tls>
      449. </modules>
      450. </ftp>
      451. <smart>
      452. <enable>1</enable>
      453. <interval>1800</interval>
      454. <powermode>never</powermode>
      455. <tempdiff>0</tempdiff>
      456. <tempinfo>0</tempinfo>
      457. <tempcrit>0</tempcrit>
      458. <monitor>
      459. <device>
      460. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      461. <devicefile>/dev/xxx</devicefile>
      462. <enable>0|1</enable>
      463. <type>|sat|cciss|xxx</type>
      464. </device>
      465. <device>
      466. <uuid>dd7dba0a-6c12-4260-8530-e7e952489425</uuid>
      467. <devicefile>/dev/disk/by-id/wwn-0x50014ee10034c3da</devicefile>
      468. <enable>1</enable>
      469. <type></type>
      470. </device>
      471. </monitor>
      472. <scheduledtests></scheduledtests>
      473. </smart>
      474. <tftp>
      475. <!--
      476. <blocksize>[512-65464]</blocksize>
      477. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      478. -->
      479. <enable>0</enable>
      480. <port>69</port>
      481. <retransmit>1000000</retransmit>
      482. <blocksize>512</blocksize>
      483. <allownewfiles>0</allownewfiles>
      484. <sharedfolderref></sharedfolderref>
      485. <extraoptions></extraoptions>
      486. </tftp>
      487. <smb>
      488. <enable>0</enable>
      489. <workgroup>MSHEIMNETZ</workgroup>
      490. <serverstring>%h server</serverstring>
      491. <loglevel>0</loglevel>
      492. <usesendfile>1</usesendfile>
      493. <aio>1</aio>
      494. <nullpasswords>1</nullpasswords>
      495. <localmaster>1</localmaster>
      496. <timeserver>0</timeserver>
      497. <winssupport>0</winssupport>
      498. <winsserver></winsserver>
      499. <homesenable>0</homesenable>
      500. <homesbrowseable>1</homesbrowseable>
      501. <extraoptions></extraoptions>
      502. <shares></shares>
      503. </smb>
      504. <rsync>
      505. <server>
      506. <enable>0</enable>
      507. <port>873</port>
      508. <extraoptions></extraoptions>
      509. <modules>
      510. <!--
      511. <module>
      512. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      513. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      514. <uid>xxx</uid>
      515. <gid>xxx</gid>
      516. <name>xxx</name>
      517. <comment>xxx</comment>
      518. <readonly>0</readonly>
      519. <writeonly>0</writeonly>
      520. <maxconnections>0</maxconnections>
      521. <list>1</list>
      522. <hostsallow></hostsallow>
      523. <hostsdeny></hostsdeny>
      524. <extraoptions></extraoptions>
      525. <authusers>0|1</authusers>
      526. <usechroot>0|1</usechroot>
      527. <users>
      528. <user>
      529. <name>xxx</name>
      530. <password>xxx</password>
      531. <user>
      532. <users>
      533. </module>
      534. -->
      535. </modules>
      536. </server>
      537. <jobs>
      538. <!--
      539. <job>
      540. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      541. <enable>0|1</enable>
      542. <sendemail>0|1<sendemail>
      543. <comment>xxx</comment>
      544. <type>local|remote</type>
      545. <src>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</src>
      546. <dest>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</dest>
      547. <minute>[00-59|*]</minute>
      548. <everynminute>0|1</everynminute>
      549. <hour>[00-23|*]</hour>
      550. <everynhour>0|1</everynhour>
      551. <dayofmonth>[01-31|*]</dayofmonth>
      552. <everyndayofmonth>0|1</everyndayofmonth>
      553. <month>[01-12|*]</month>
      554. <dayofweek>[1-7|*]</dayofweek>
      555. <recursive>1</recursive>
      556. <times>1</times>
      557. <compress>0</compress>
      558. <archive>1</archive>
      559. <delete>0</delete>
      560. <quiet>0</quiet>
      561. <perms>1</perms>
      562. <acls>1</acls>
      563. <xattrs>0</xattrs>
      564. <dryrun>0</dryrun>
      565. <partial>0</partial>
      566. <extraoptions></extraoptions>
      567. // remote
      568. <mode>push|pull</mode>
      569. <password>xxx</password>
      570. </job>
      571. -->
      572. </jobs>
      573. </rsync>
      574. <snmp>
      575. <!--
      576. <version>2c|3</version>
      577. <securitylevel>noauth|auth|priv</securitylevel>
      578. <authtype>MD5|SHA</authtype>
      579. <privtype>DES|AES</privtype>
      580. -->
      581. <enable>0</enable>
      582. <community>public</community>
      583. <syslocation></syslocation>
      584. <syscontact></syscontact>
      585. <version>2c</version>
      586. <username></username>
      587. <securitylevel>noauth</securitylevel>
      588. <authtype>MD5</authtype>
      589. <authpassphrase></authpassphrase>
      590. <privtype>DES</privtype>
      591. <privpassphrase></privpassphrase>
      592. <extraoptions></extraoptions>
      593. <trap>
      594. <enable>0</enable>
      595. <community>public</community>
      596. <host>localhost</host>
      597. <port>162</port>
      598. </trap>
      599. </snmp>
      600. <zeroconf>
      601. <services>
      602. <!--
      603. <service>
      604. <id>xxx</id>
      605. <enable>0|1</enable>
      606. <name>xxx</name>
      607. </service>
      608. -->
      609. <service>
      610. <id>webadmin</id>
      611. <enable>1</enable>
      612. <name>%h - Web administration</name>
      613. </service>
      614. <service>
      615. <id>ssh</id>
      616. <enable>1</enable>
      617. <name>%h - SSH</name>
      618. </service>
      619. <service>
      620. <id>nfs</id>
      621. <enable>1</enable>
      622. <name>%h - NFS</name>
      623. </service>
      624. <service>
      625. <id>ftp</id>
      626. <enable>1</enable>
      627. <name>%h - FTP</name>
      628. </service>
      629. <service>
      630. <id>tftp</id>
      631. <enable>1</enable>
      632. <name>%h - TFTP</name>
      633. </service>
      634. <service>
      635. <id>smb</id>
      636. <enable>1</enable>
      637. <name>%h - SMB/CIFS</name>
      638. </service>
      639. <service>
      640. <id>rsync</id>
      641. <enable>1</enable>
      642. <name>%h - Rsync</name>
      643. </service>
      644. </services>
      645. </zeroconf>
      646. </services>
      647. </config>
      Display All


      I think the problem is that the filesystem is marked as still in use. Maybe the probloms arose bcs I also played with ACL ( activate/deactivate ) ?
      Files
      • NL-40-12.JPG

        (26.3 kB, downloaded 839 times, last: )
      • NL-40-11.JPG

        (20.19 kB, downloaded 828 times, last: )
    • Re: Can't delete shared folder and filesystem ?

      Tough no longer activated its still referenced in the config file. Therefore it is still beeing used. I'll need to check wether this is a bug or not. ;)

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Schönes intensives Spiel ;) Ich würde es Chile gönnen!
      So zurück zum Thema:
      lösche mal in der config.xml die Abschnitte, welche auf die Shares und auf das Filesystem verweisen. Vorher ein Backup der config machen, falls was schiefgeht.
      Das hat nix mit den ACLs zu tun.

      Wir brauchen einen Schalter, der _alle_ Shares auf einer Festplatte aus der Config entfernt ...
      "Glowing days. Don't cry because they are over. Smile because they happened." - Confucius

      Server: 1x 32GB SSD (system) - 5x 2TB Data - 1x 2TB Snapraid-Parity - latest OMV 1.x
      No Support through PM
      Tutorials --- Howto install OMV-Extras --- Upgrade/Update-Problems --- If autoshutdown doesn' -work
    • Re: Can't delete shared folder and filesystem ?

      Erklärt aber nicht warum die Referenz auf die Homeshares verbleibt nach deaktivierung. ;)

      Gruß
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Yes, the shared folder must be a home directory for a user or something. You cannot delete the shared folder until it is not used by anything. Also, you cannot unmount a drive until it is unused by anything in the web-gui. I would edit your users and check if any of them have the shared folder in question as a home directory.

      Once you get used to doing this properly you will save yourself many headaches.
    • Re: Can't delete shared folder and filesystem ?

      That's the way I thought it should work.

      But as mentioned in the beginning:

      But I only could disable SMB/CIFS and delete the user. I can't delete the shared folder, the filesystem or unmount or delete
      the data drive ! ? These buttons are not lighted up..........

      I think I also deleted the data in the shared folder. As fa as I remember I couldn't delete the directories . So I ask myself who or what is still using the shared folder ?

      I think now too it's a bug.

      The post was edited 1 time, last by willri ().

    • Re: Can't delete shared folder and filesystem ?

      The homefolder, tough disabled, is still refering to the shared folder. Can you post a screenshot of the home folder tab in the WebGUI?

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Thats not what I meant. Access Rights Management | User | second tab. ;)

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      Are you able to delete the Location?

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Can't delete shared folder and filesystem ?

      In the settings I first enabled the location then I could selcet in the location "none"

      and SURPRISE SURPRISE ( for me ) I was able to delete the shared folder and unmount
      and delete of the data drive is now also possible.

      Congratiolations - problem solved.

      Is this the way it was meant to work ? That mean, it is not sufficiant just to diable the "user home directory"

      I fear more newbees maybe run also into this "trap".