[RESOLVED] Unable to log into gui

    • [RESOLVED] Unable to log into gui

      I'm just starting this project up.

      I made a couple of changes, via the gui to setup things (mostly turning on services and such), one of them being setting up ntp and changing the timezone.

      A minute or so after this, I got kicked out of the gui and no longer able to log in. I am able to ssh in so was able to check logs and such and unable to find anything useful.

      Anyone have suggestions on where to go from here?

      Thanks!

      Brian

      The post was edited 1 time, last by vandi ().

    • Re: Unable to log into gui

      Do you get any error message when you try to login?
      Via CLI you can type in the following command to help yourself - IF there is something wrong with anything you can reset with this CLI tool.

      Source Code

      1. omv-firstaid

      If you can´t find it, please post your config.xml

      Source Code

      1. cat /etc/openmediavault/config.xml
      OMV stoneburner | HP Microserver | 256GB Samsung 830 SSD for system | 4x 2TB in a RAID5
      OMV erasmus| Odroid XU4 | 5TB Data drive | 500GB Backup drive
    • Re: Unable to log into gui

      Thanks for that command... looks useful, but really not any help here. When I attempt to log in to the gui, it looks like it attempts to log in and then drops back to the log in screen, if I use a bad password or invalid use, it does compain about that. so I think it's authenticating correctly.

      Here is the config.xml *DOMAIN* *EMAIL* is there for sanitizing:

      Source Code

      1. root@nas2:~# cat /etc/openmediavault/config.xml
      2. <?xml version="1.0" encoding="UTF-8"?>
      3. <config>
      4. <!-- Configuration version -->
      5. <version>0.1</version>
      6. <!-- System configuration - Do not add any configuration here -->
      7. <system>
      8. <apt>
      9. <distribution>
      10. <proposed>1</proposed>
      11. <partner>1</partner>
      12. </distribution>
      13. </apt>
      14. <powermanagement>
      15. <cpufreq>1</cpufreq>
      16. <powerbtn>0</powerbtn>
      17. </powermanagement>
      18. <time>
      19. <timezone>America/New_York</timezone>
      20. <ntp>
      21. <enable>1</enable>
      22. <timeservers>pool.ntp.org</timeservers>
      23. </ntp>
      24. </time>
      25. <email>
      26. <!--
      27. <enable>0|1</enable>
      28. <tls>0|1</tls>
      29. -->
      30. <enable>0</enable>
      31. <server></server>
      32. <port>25</port>
      33. <tls>0</tls>
      34. <sender></sender>
      35. <authentication>
      36. <!--
      37. <enable>0|1</enable>
      38. -->
      39. <enable>0</enable>
      40. <username></username>
      41. <password></password>
      42. </authentication>
      43. <primaryemail></primaryemail>
      44. <secondaryemail></secondaryemail>
      45. </email>
      46. <notification>
      47. <notifications>
      48. <!--
      49. <xxx>0|1</xxx>
      50. -->
      51. <monitprocevents>1</monitprocevents>
      52. <monitloadavg>1</monitloadavg>
      53. <monitmemoryusage>1</monitmemoryusage>
      54. <monitcpuusage>1</monitcpuusage>
      55. <monitfilesystems>1</monitfilesystems>
      56. <mdadm>1</mdadm>
      57. <smartmontools>1</smartmontools>
      58. </notifications>
      59. </notification>
      60. <certificates>
      61. <!--
      62. <sslcertificate>
      63. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      64. <certificate>xxx</certificate>
      65. <privatekey>xxx</privatekey>
      66. <comment>xxx</comment>
      67. </sslcertificate>
      68. -->
      69. </certificates>
      70. <network>
      71. <hostname>nas2</hostname>
      72. <domainname>*DOMAIN*</domainname>
      73. <interfaces>
      74. <iface>
      75. <uuid>1ab63f2b-44e4-4c3e-9014-01e3b565945f</uuid>
      76. <devicename>eth0</devicename>
      77. <method>static</method>
      78. <address>172.16.7.10</address>
      79. <netmask>255.255.0.0</netmask>
      80. <gateway>172.16.0.1</gateway>
      81. <method6>manual</method6>
      82. <address6></address6>
      83. <netmask6>64</netmask6>
      84. <gateway6></gateway6>
      85. <mtu></mtu>
      86. <wol>0</wol>
      87. <options></options>
      88. <comment></comment>
      89. </iface>
      90. </interfaces>
      91. <hostac>
      92. <allow># /etc/hosts.allow: list of hosts that are allowed to access the system.
      93. # See the manual pages hosts_access(5) and hosts_options(5).
      94. #
      95. # Example: ALL: LOCAL @some_netgroup
      96. # ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
      97. #
      98. # If you're going to protect the portmapper use the name "portmap" for the
      99. # daemon name. Remember that you can only use the keyword "ALL" and IP
      100. # addresses (NOT host or domain names) for the portmapper, as well as for
      101. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      102. # for further information.
      103. #</allow>
      104. <deny># /etc/hosts.deny: list of hosts that are _not_ allowed to access the system.
      105. # See the manual pages hosts_access(5) and hosts_options(5).
      106. #
      107. # Example: ALL: some.host.name, .some.domain
      108. # ALL EXCEPT in.fingerd: other.host.name, .other.domain
      109. #
      110. # If you're going to protect the portmapper use the name "portmap" for the
      111. # daemon name. Remember that you can only use the keyword "ALL" and IP
      112. # addresses (NOT host or domain names) for the portmapper, as well as for
      113. # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
      114. # for further information.
      115. #
      116. # The PARANOID wildcard matches any host whose name does not match its
      117. # address.
      118. #
      119. # You may wish to enable this to ensure any programs that don't
      120. # validate looked up hostnames still leave understandable logs. In past
      121. # versions of Debian this has been the default.
      122. # ALL: PARANOID</deny>
      123. </hostac>
      124. <dnsnameservers>172.16.0.1</dnsnameservers>
      125. <iptables></iptables>
      126. </network>
      127. <usermanagement>
      128. <homedirectory>
      129. <enable>1</enable>
      130. <sharedfolderref>7d76d8fa-70fb-4d1d-9e3f-fe51a7f166c3</sharedfolderref>
      131. </homedirectory>
      132. <users>
      133. <!--
      134. <user>
      135. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      136. <name>xxx</name>
      137. <email>xxx</email>
      138. <disallowusermod>0</disallowusermod>
      139. </user>
      140. -->
      141. <user>
      142. <uuid>fd3a8719-02a9-401e-bbc6-7ce33182f8b5</uuid>
      143. <name>vandi</name>
      144. <email>*EMAIL*</email>
      145. <disallowusermod>0</disallowusermod>
      146. </user>
      147. <user>
      148. <uuid>b95a3566-dba1-46b7-ac2c-f8e7000d3378</uuid>
      149. <name>alex</name>
      150. <email>*EMAIL*</email>
      151. <disallowusermod>0</disallowusermod>
      152. </user>
      153. <user>
      154. <uuid>f3c2064c-8b82-4e50-ad93-3eb1210cee7c</uuid>
      155. <name>laura</name>
      156. <email>*EMAIL*</email>
      157. <disallowusermod>0</disallowusermod>
      158. </user>
      159. </users>
      160. <groups>
      161. <!--
      162. <group>
      163. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      164. <name>xxx</name>
      165. <comment>xxx</comment>
      166. </group>
      167. -->
      168. </groups>
      169. </usermanagement>
      170. <crontab>
      171. <!--
      172. <job>
      173. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      174. <enable>0|1</enable>
      175. <sendemail>0|1<sendemail>
      176. <type>reboot|shutdown|userdefined</type>
      177. <comment>xxx</comment>
      178. <minute>[00-59|*]</minute>
      179. <everynminute>0|1</everynminute>
      180. <hour>[00-23|*]</hour>
      181. <everynhour>0|1</everynhour>
      182. <dayofmonth>[01-31|*]</dayofmonth>
      183. <everyndayofmonth>0|1</everyndayofmonth>
      184. <month>[01-12|*]</month>
      185. <dayofweek>[1-7|*]</dayofweek>
      186. <username>xxx</username>
      187. <command>xxx</command>
      188. </job>
      189. -->
      190. </crontab>
      191. <syslog>
      192. <remote>
      193. <!--
      194. <protocol>udp|tcp</protocol>
      195. -->
      196. <enable>0</enable>
      197. <host></host>
      198. <port>514</port>
      199. <protocol>udp</protocol>
      200. </remote>
      201. </syslog>
      202. <storage>
      203. <!--
      204. <hdparm>
      205. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      206. <devicefile>/dev/xxx</devicefile>
      207. <apm>0 = disable|1-255<apm>
      208. <aam>0|128|254</aam>
      209. <spindowntime>0 = disabled|1-254</spindowntime>
      210. <writecache>0|1</writecache>
      211. </hdparm>
      212. -->
      213. <filesystem>
      214. <!--
      215. <quota>
      216. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      217. <fsuuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx</fsuuid>
      218. <usrquota>
      219. <name>xxx</name>
      220. <bsoftlimit>0</bsoftlimit>
      221. <bhardlimit>xxx</bhardlimit>
      222. <isoftlimit>0</isoftlimit>
      223. <ihardlimit>0</ihardlimit>
      224. </usrquota>
      225. <usrquota>
      226. ...
      227. </usrquota>
      228. <grpquota>
      229. <name>xxx</name>
      230. <bsoftlimit>0</bsoftlimit>
      231. <bhardlimit>xxx</bhardlimit>
      232. <isoftlimit>0</isoftlimit>
      233. <ihardlimit>0</ihardlimit>
      234. </grpquota>
      235. <grpquota>
      236. ...
      237. </grpquota>
      238. </quota>
      239. <quota>
      240. ...
      241. </quota>
      242. -->
      243. </filesystem>
      244. </storage>
      245. <fstab>
      246. <!--
      247. <mntent>
      248. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      249. <fsname>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxxx-xxxx|/dev/xxx</fsname>
      250. <dir>/xxx/yyy/zzz</dir>
      251. <type>ext2|ext3|ext4|xfs|jfs|iso9660|udf</type>
      252. <opts></opts>
      253. <freq>0</freq>
      254. <passno>0|1|2</passno>
      255. </mntent>
      256. -->
      257. <mntent>
      258. <uuid>eff49fd2-1e0d-4b12-baf6-0fd3f0fabd63</uuid>
      259. <fsname>3bec0418-cc2a-4d6c-bde6-f8780c0bd9db</fsname>
      260. <dir>/media/3bec0418-cc2a-4d6c-bde6-f8780c0bd9db</dir>
      261. <type>xfs</type>
      262. <opts>defaults,nofail,noexec,usrquota,grpquota</opts>
      263. <freq>0</freq>
      264. <passno>2</passno>
      265. </mntent>
      266. <mntent>
      267. <uuid>944b772f-d9f1-4a33-b18a-e7008cd02ba9</uuid>
      268. <fsname>/media/3bec0418-cc2a-4d6c-bde6-f8780c0bd9db/home/</fsname>
      269. <dir>/export/home</dir>
      270. <type>none</type>
      271. <opts>bind</opts>
      272. <freq>0</freq>
      273. <passno>0</passno>
      274. </mntent>
      275. </fstab>
      276. <shares>
      277. <!--
      278. <sharedfolder>
      279. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      280. <name>xxx</name>
      281. <comment>xxx</comment>
      282. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      283. <reldirpath>xxx</reldirpath>
      284. <privileges>
      285. <privilege>
      286. <type>user|group</type>
      287. <name>xxx</name>
      288. <perms>0 = no permission|5 = read and execute|7 = read, write and execute</perms>
      289. </privilege>
      290. </privileges>
      291. </sharedfolder>
      292. -->
      293. <sharedfolder>
      294. <uuid>7d76d8fa-70fb-4d1d-9e3f-fe51a7f166c3</uuid>
      295. <name>home</name>
      296. <comment></comment>
      297. <mntentref>eff49fd2-1e0d-4b12-baf6-0fd3f0fabd63</mntentref>
      298. <reldirpath>home/</reldirpath>
      299. <privileges></privileges>
      300. </sharedfolder>
      301. </shares>
      302. </system>
      303. <!-- Web administration configuration - Do not add any configuration here -->
      304. <webadmin>
      305. <port>80</port>
      306. <enablessl>0</enablessl>
      307. <sslport>443</sslport>
      308. <forcesslonly>0</forcesslonly>
      309. <sslcertificateref></sslcertificateref>
      310. <timeout>5</timeout>
      311. <dnssd>
      312. <enable>0</enable>
      313. <name></name>
      314. </dnssd>
      315. </webadmin>
      316. <!-- Plugin configuration area -->
      317. <services>
      318. <ssh>
      319. <enable>1</enable>
      320. <port>22</port>
      321. <extraoptions></extraoptions>
      322. <passwordauthentication>1</passwordauthentication>
      323. <permitrootlogin>1</permitrootlogin>
      324. <tcpforwarding>0</tcpforwarding>
      325. <compression>0</compression>
      326. </ssh>
      327. <nfs>
      328. <enable>1</enable>
      329. <numproc>8</numproc>
      330. <shares>
      331. <share>
      332. <uuid>9cd1c812-ac88-4217-baef-54ef0ef1ce4e</uuid>
      333. <sharedfolderref>7d76d8fa-70fb-4d1d-9e3f-fe51a7f166c3</sharedfolderref>
      334. <mntentref>944b772f-d9f1-4a33-b18a-e7008cd02ba9</mntentref>
      335. <client>172.16.0.0/16,192.168.1.0/24</client>
      336. <options>rw</options>
      337. <extraoptions>subtree_check,secure</extraoptions>
      338. <comment></comment>
      339. </share>
      340. </shares>
      341. </nfs>
      342. <ftp>
      343. <enable>0</enable>
      344. <port>21</port>
      345. <maxclients>5</maxclients>
      346. <maxconnectionsperhost>2</maxconnectionsperhost>
      347. <maxloginattempts>1</maxloginattempts>
      348. <timeoutidle>1200</timeoutidle>
      349. <displaylogin></displaylogin>
      350. <allowforeignaddress>0</allowforeignaddress>
      351. <allowrestart>0</allowrestart>
      352. <identlookups>0</identlookups>
      353. <usereversedns>0</usereversedns>
      354. <rootlogin>0</rootlogin>
      355. <masqueradeaddress></masqueradeaddress>
      356. <dynmasqrefresh>0</dynmasqrefresh>
      357. <usepassiveports>0</usepassiveports>
      358. <minpassiveports>49152</minpassiveports>
      359. <maxpassiveports>65534</maxpassiveports>
      360. <limittransferrate>0</limittransferrate>
      361. <maxuptransferrate>0</maxuptransferrate>
      362. <maxdowntransferrate>0</maxdowntransferrate>
      363. <anonymous>0</anonymous>
      364. <requirevalidshell>1</requirevalidshell>
      365. <transferlog>0</transferlog>
      366. <extraoptions></extraoptions>
      367. <shares>
      368. <!--
      369. <share>
      370. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      371. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      372. <mntentref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</mntentref>
      373. <comment>xxx</comment>
      374. </share>
      375. -->
      376. </shares>
      377. <modules>
      378. <mod_ban>
      379. <!--
      380. <rule>
      381. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      382. <event>AnonRejectPasswords|ClientConnectRate|MaxClientsPerClass|MaxClientsPerHost|MaxClientsPerUser|MaxConnectionsPerHost|MaxHostsPerUser|MaxLoginAttempts|TimeoutIdle|TimeoutNoTransfer</event>
      383. <occurrence>xxx</occurrence>
      384. <timeinterval>hh:mm:ss</timeinterval>
      385. <expire>hh:mm:ss</expire>
      386. </rule>
      387. -->
      388. </mod_ban>
      389. <mod_tls>
      390. <enable>0</enable>
      391. <required>0</required>
      392. <sslcertificateref></sslcertificateref>
      393. <nocertrequest>0</nocertrequest>
      394. <nosessionreuserequired>0</nosessionreuserequired>
      395. <useimplicitssl>0</useimplicitssl>
      396. <extraoptions></extraoptions>
      397. </mod_tls>
      398. </modules>
      399. </ftp>
      400. <smart>
      401. <!--
      402. <powermode>never|sleep|standby|idle</powermode>
      403. -->
      404. <enable>0</enable>
      405. <interval>1800</interval>
      406. <powermode>never</powermode>
      407. <tempdiff>0</tempdiff>
      408. <tempinfo>0</tempinfo>
      409. <tempcrit>0</tempcrit>
      410. <monitor>
      411. <device>
      412. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      413. <devicefile>/dev/xxx</devicefile>
      414. <enable>0|1</enable>
      415. <type>|sat|cciss|xxx</type>
      416. </device>
      417. </monitor>
      418. <scheduledtests>
      419. <!--
      420. <job>
      421. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      422. <enable>0|1</enable>
      423. <devicefile>/dev/xxx</devicefile>
      424. <type>S|L|C|O</type>
      425. <month>[01-12|*]</month>
      426. <dayofmonth>[01-31|*]</dayofmonth>
      427. <dayofweek>[1-7|*]</dayofweek>
      428. <hour>[00-23|*]</hour>
      429. <comment>xxx</comment>
      430. </job>
      431. -->
      432. </scheduledtests>
      433. </smart>
      434. <tftp>
      435. <!--
      436. <blocksize>[512-65464]</blocksize>
      437. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      438. -->
      439. <enable>0</enable>
      440. <port>69</port>
      441. <retransmit>1000000</retransmit>
      442. <blocksize>512</blocksize>
      443. <allownewfiles>0</allownewfiles>
      444. <sharedfolderref></sharedfolderref>
      445. <extraoptions></extraoptions>
      446. </tftp>
      447. <smb>
      448. <enable>1</enable>
      449. <workgroup>WORKGROUP</workgroup>
      450. <serverstring>%h server</serverstring>
      451. <loglevel>0</loglevel>
      452. <usesendfile>1</usesendfile>
      453. <aio>1</aio>
      454. <nullpasswords>0</nullpasswords>
      455. <localmaster>1</localmaster>
      456. <timeserver>1</timeserver>
      457. <winssupport>0</winssupport>
      458. <winsserver></winsserver>
      459. <homesenable>1</homesenable>
      460. <homesbrowseable>1</homesbrowseable>
      461. <extraoptions></extraoptions>
      462. <shares>
      463. <share>
      464. <uuid>c589a16e-4649-4dd2-9b82-a02414b34b3f</uuid>
      465. <sharedfolderref>7d76d8fa-70fb-4d1d-9e3f-fe51a7f166c3</sharedfolderref>
      466. <name>Home</name>
      467. <comment>User Home Directory</comment>
      468. <guestok>0</guestok>
      469. <readonly>0</readonly>
      470. <browseable>1</browseable>
      471. <inheritacls>1</inheritacls>
      472. <inheritpermissions>0</inheritpermissions>
      473. <recyclebin>0</recyclebin>
      474. <recyclemaxsize>0</recyclemaxsize>
      475. <recyclemaxage>0</recyclemaxage>
      476. <hidedotfiles>1</hidedotfiles>
      477. <easupport>0</easupport>
      478. <storedosattributes>0</storedosattributes>
      479. <hostsallow></hostsallow>
      480. <hostsdeny></hostsdeny>
      481. <extraoptions></extraoptions>
      482. </share>
      483. </shares>
      484. </smb>
      485. <rsync>
      486. <server>
      487. <enable>0</enable>
      488. <port>873</port>
      489. <extraoptions></extraoptions>
      490. <modules>
      491. <!--
      492. <module>
      493. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      494. <sharedfolderref>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</sharedfolderref>
      495. <uid>xxx</uid>
      496. <gid>xxx</gid>
      497. <name>xxx</name>
      498. <comment>xxx</comment>
      499. <readonly>0</readonly>
      500. <writeonly>0</writeonly>
      501. <maxconnections>0</maxconnections>
      502. <list>1</list>
      503. <hostsallow></hostsallow>
      504. <hostsdeny></hostsdeny>
      505. <extraoptions></extraoptions>
      506. <authusers>0|1</authusers>
      507. <usechroot>0|1</usechroot>
      508. <users>
      509. <user>
      510. <name>xxx</name>
      511. <password>xxx</password>
      512. <user>
      513. <users>
      514. </module>
      515. -->
      516. </modules>
      517. </server>
      518. <jobs>
      519. <!--
      520. <job>
      521. <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
      522. <enable>0|1</enable>
      523. <sendemail>0|1<sendemail>
      524. <comment>xxx</comment>
      525. <type>local|remote</type>
      526. <src>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</src>
      527. <dest>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx|xxx</dest>
      528. <minute>[00-59|*]</minute>
      529. <everynminute>0|1</everynminute>
      530. <hour>[00-23|*]</hour>
      531. <everynhour>0|1</everynhour>
      532. <dayofmonth>[01-31|*]</dayofmonth>
      533. <everyndayofmonth>0|1</everyndayofmonth>
      534. <month>[01-12|*]</month>
      535. <dayofweek>[1-7|*]</dayofweek>
      536. <recursive>1</recursive>
      537. <times>1</times>
      538. <compress>0</compress>
      539. <archive>1</archive>
      540. <delete>0</delete>
      541. <quiet>0</quiet>
      542. <perms>1</perms>
      543. <acls>1</acls>
      544. <xattrs>0</xattrs>
      545. <dryrun>0</dryrun>
      546. <partial>0</partial>
      547. <extraoptions></extraoptions>
      548. // remote
      549. <mode>push|pull</mode>
      550. <password>xxx</password>
      551. </job>
      552. -->
      553. </jobs>
      554. </rsync>
      555. <snmp>
      556. <!--
      557. <version>2c|3</version>
      558. <securitylevel>noauth|auth|priv</securitylevel>
      559. <authtype>MD5|SHA</authtype>
      560. <privtype>DES|AES</privtype>
      561. -->
      562. <enable>0</enable>
      563. <community>public</community>
      564. <syslocation></syslocation>
      565. <syscontact></syscontact>
      566. <version>2c</version>
      567. <username></username>
      568. <securitylevel>noauth</securitylevel>
      569. <authtype>MD5</authtype>
      570. <authpassphrase></authpassphrase>
      571. <privtype>DES</privtype>
      572. <privpassphrase></privpassphrase>
      573. <extraoptions></extraoptions>
      574. <trap>
      575. <enable>0</enable>
      576. <community>public</community>
      577. <host>localhost</host>
      578. <port>162</port>
      579. </trap>
      580. </snmp>
      581. <zeroconf>
      582. <services>
      583. <!--
      584. <service>
      585. <id>xxx</id>
      586. <enable>0|1</enable>
      587. <name>xxx</name>
      588. </service>
      589. -->
      590. <service>
      591. <id>webadmin</id>
      592. <enable>1</enable>
      593. <name>%h - Web administration</name>
      594. </service>
      595. <service>
      596. <id>ssh</id>
      597. <enable>1</enable>
      598. <name>%h - SSH</name>
      599. </service>
      600. <service>
      601. <id>nfs</id>
      602. <enable>1</enable>
      603. <name>%h - NFS</name>
      604. </service>
      605. <service>
      606. <id>ftp</id>
      607. <enable>1</enable>
      608. <name>%h - FTP</name>
      609. </service>
      610. <service>
      611. <id>tftp</id>
      612. <enable>1</enable>
      613. <name>%h - TFTP</name>
      614. </service>
      615. <service>
      616. <id>smb</id>
      617. <enable>1</enable>
      618. <name>%h - SMB/CIFS</name>
      619. </service>
      620. <service>
      621. <id>rsync</id>
      622. <enable>1</enable>
      623. <name>%h - Rsync</name>
      624. </service>
      625. </services>
      626. </zeroconf>
      627. <clamav>
      628. <enable>1</enable>
      629. <clamd>
      630. <logclean>0</logclean>
      631. <scanpe>1</scanpe>
      632. <scanole2>1</scanole2>
      633. <scanhtml>1</scanhtml>
      634. <scanpdf>1</scanpdf>
      635. <scanelf>1</scanelf>
      636. <scanarchive>1</scanarchive>
      637. <detectbrokenexecutables>0</detectbrokenexecutables>
      638. <algorithmicdetection>1</algorithmicdetection>
      639. <followdirectorysymlinks>0</followdirectorysymlinks>
      640. <followfilesymlinks>0</followfilesymlinks>
      641. <detectpua>0</detectpua>
      642. <extraoptions></extraoptions>
      643. </clamd>
      644. <freshclam>
      645. <enable>1</enable>
      646. <checks>24</checks>
      647. <databasemirror>db.local.clamav.net</databasemirror>
      648. </freshclam>
      649. <jobs></jobs>
      650. </clamav>
      651. <daap>
      652. <enable>0</enable>
      653. <libraryname>%h - iTunes/DAAP</libraryname>
      654. <port>3689</port>
      655. <sharedfolderref></sharedfolderref>
      656. <passwordrequired>0</passwordrequired>
      657. <password></password>
      658. <adminpassword>unused</adminpassword>
      659. </daap>
      660. <iscsitarget>
      661. <enable>0</enable>
      662. <authentication></authentication>
      663. <extraoptions></extraoptions>
      664. <targets></targets>
      665. </iscsitarget>
      666. <afp>
      667. <enable>1</enable>
      668. <allowclrtxt>0</allowclrtxt>
      669. <homesenable>1</homesenable>
      670. <extraoptions></extraoptions>
      671. <shares>
      672. <share>
      673. <uuid>6333e716-ae3b-4a6f-9e47-18a015b531c0</uuid>
      674. <sharedfolderref>7d76d8fa-70fb-4d1d-9e3f-fe51a7f166c3</sharedfolderref>
      675. <name>Home</name>
      676. <comment>Home Directories</comment>
      677. <password></password>
      678. <casefold>none</casefold>
      679. <volsizelimit>0</volsizelimit>
      680. <allowguest>0</allowguest>
      681. <guestrw>0</guestrw>
      682. <options>
      683. <ro>0</ro>
      684. <upriv>1</upriv>
      685. <usedots>1</usedots>
      686. <invisibledots>0</invisibledots>
      687. <tm>0</tm>
      688. <mswindows>0</mswindows>
      689. </options>
      690. <extraoptions></extraoptions>
      691. </share>
      692. </shares>
      693. </afp>
      694. <owncloud>
      695. <enable>0</enable>
      696. <instanceid>3338175948041884489203396081627274731</instanceid>
      697. <passwordsalt>i4TGcit/V8DObD/1FwlI7wVFQ8KR9Rrq4Y7nKJti</passwordsalt>
      698. <sharedfolderref></sharedfolderref>
      699. <shares></shares>
      700. </owncloud>
      701. </services>
      702. </config>
      Display All
    • Re: Unable to log into gui

      Whats the output of

      Source Code

      1. df -h


      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: Unable to log into gui

      Source Code

      1. Filesystem Size Used Avail Use% Mounted on
      2. /dev/sde1 15G 1.3G 13G 10% /
      3. tmpfs 1.9G 0 1.9G 0% /lib/init/rw
      4. udev 1.9G 172K 1.9G 1% /dev
      5. tmpfs 1.9G 0 1.9G 0% /dev/shm
      6. tmpfs 1.9G 0 1.9G 0% /tmp
      7. /dev/mapper/Nas2A_vg-home_lv
      8. 508G 4.7M 508G 1% /media/3bec0418-cc2a-4d6c-bde6-f8780c0bd9db
    • Re: Unable to log into gui

      Whcih OMV version are you running?

      I assume that the problem has something to do with the modified timezone, especially PHP (and Apache in OMV 0.5.x) does not recognise this. Due this fact the time() function does not return the correct time which forces a auto-logout because the timeout for the last webgui access is calculated incorrect.

      Please restart the apache process on 0.5.x:

      # monit restart apache2

      For 0.6.x

      # monit restart php5-fpm
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Re: Unable to log into gui

      I'm running 0.5.51 - Yes, before setting the time zone in the gui I was seeing a lot of timezone errors. I have rebooted the system and it still doesn't let me log in.

      Restarting apache2 does not fix anything.

      This is what i was getting in the syslog after installation and prior to setting the timezone via the GUI.

      Source Code

      1. Jul 1 21:49:46 nas2 php5: Unknown or unsupported timezone [tz=US/Eastern]
      2. Jul 1 21:49:46 nas2 omv-engined[28447]: Unknown or unsupported timezone [tz=US/Eastern]
      3. Jul 1 21:49:46 nas2 php5: Unknown or unsupported timezone [tz=US/Eastern]
      4. Jul 1 21:49:46 nas2 omv-engined[28449]: Unknown or unsupported timezone [tz=US/Eastern]
    • Re: Unable to log into gui

      Reconfigure your timezone using the following command

      Source Code

      1. dpkg-reconfigure tzdata
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Re: Unable to log into gui

      Ah thanks... but still no luck...
      restarted apache2 after running and then rebooted just to ensure everything was in sync...but still a no go..

      I'm thinking the timezone issue is just a red herring for the actual issue, but until something useful shows up in the log file it'll be hard to track down.

      Is there a way to "factory" reset without re-installing?

      Again, thanks for all the suggestions.
    • Re: Unable to log into gui

      "vandi" wrote:

      Ah thanks... but still no luck...
      restarted apache2 after running and then rebooted just to ensure everything was in sync...but still a no go..

      I'm thinking the timezone issue is just a red herring for the actual issue, but until something useful shows up in the log file it'll be hard to track down.

      Is there a way to "factory" reset without re-installing?

      Again, thanks for all the suggestions.


      If you've ran omv-firstaid... have you tried clearing your browser cache before logging in? I've had similar issues in the past.

      If you don't want to clear your cache to test this, just start Chrome, IE, or Firefox in "privacy mode".. which operates with a clear cache. See if you can log into the webUI from there. If it works, then it is simply a cache issue and you can clear your cache to correct the problem. It seems resetting the timezone from command line should have resolved this issue.
      Air Conditioners are a lot like PC's... They work great until you open Windows.

    • Re: [RESOLVED] Unable to log into gui

      You had to modify the /etc/openmediavault/config.xml file, too.

      XML Source Code

      1. <?xml version="1.0" encoding="UTF-8"?>
      2. <config>
      3. <!-- Configuration version -->
      4. <version>0.1</version>
      5. <!-- System configuration - Do not add any configuration here -->
      6. <system>
      7. <apt>
      8. <distribution>
      9. <!--
      10. <proposed>0|1</proposed>
      11. <partner>0|1</partner>
      12. -->
      13. <proposed>0</proposed>
      14. <partner>0</partner>
      15. </distribution>
      16. </apt>
      17. <powermanagement>
      18. <cpufreq>1</cpufreq>
      19. <powerbtn>0</powerbtn>
      20. <powerbtn>nothing</powerbtn></powermanagement>
      21. <time>
      22. <timezone>Europe/Berlin</timezone>
      23. <ntp>
      24. <enable>1</enable>
      25. <timeservers>pool.ntp.org</timeservers>
      26. </ntp>
      27. </time>
      Display All


      Use 'dpkg-reconfigure tzdata' to configure a correct time zone, execute 'cat /etc/timezone' and insert it into config.xml. After that you hopefully should be able to login.
      Absolutely no support through PM!

      I must not fear.
      Fear is the mind-killer.
      Fear is the little-death that brings total obliteration.
      I will face my fear.
      I will permit it to pass over me and through me.
      And when it has gone past I will turn the inner eye to see its path.
      Where the fear has gone there will be nothing.
      Only I will remain.

      Litany against fear by Bene Gesserit
    • Re: [RESOLVED] Unable to log into gui

      I have the same issue, I can't login in the web gui. I get the red blinking square after trying to login.
      I have tried all ideas mentioned above to no avail; cleared browser cache, restarting apache2, setting timezone.
      What can be wrong?

      Source Code

      1. # df -h
      2. Filesystem Size Used Avail Use% Mounted on
      3. /dev/sda1 19G 1.5G 17G 9% /
      4. tmpfs 1007M 0 1007M 0% /lib/init/rw
      5. udev 1002M 160K 1001M 1% /dev
      6. tmpfs 1007M 0 1007M 0% /dev/shm
      7. tmpfs 1007M 16K 1007M 1% /tmp
      8. /dev/sdb1 917G 377G 541G 42% /media/46f497e3-4781-4b42-9857-b34a43414828
      9. /dev/sdc1 917G 376G 542G 41% /media/2b2d5396-5e88-4bec-b1ef-6df1317a3e0d
      10. /dev/sdd1 917G 397G 521G 44% /media/3371428a-1751-473e-abfb-1f5a04db6644
      11. none 1.8T 752G 1.1T 41% /media/shares
      12. # getent group | grep openmediavault
      13. openmediavault:x:999:openmediavault
      Display All


      My system is 0.5.xx and is on esxi host.
      OMV 1.5 (Kralizec) VM on ESXi | HP Microserver | Snapraid
    • Re: [RESOLVED] Unable to log into gui

      Did you restart openmediavault-engined?
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Re: [RESOLVED] Unable to log into gui

      "WastlJ" wrote:

      What does the square say?

      Although not exactly the same, see below.
      [IMG:http://88.198.26.218/omv/img/session_expired.png]
      Mine says: "Software Failure. Press left mouse button to continue.
      Incorrect username or password.
      "

      "ryecoaaron" wrote:

      Did you restart openmediavault-engined?

      Yes, I restarted OMV several times.

      The weird thing is that it worked for 2 weeks.
      I connected my OpenLDAP server, I added three data discs, installed aufs and snapraid (as per forums.openmediavault.org/viewtopic.php?f=13&t=3004) and configured the whole setup. Than added some other services like SABnzbd and sickbeard. All this in a two weeks timeframe. I shutdown my system almost each night. Suddenly I got this message/error.
      By the way, I can startup the SABnzbd and sickbeard webgui. So Apache runs fine. Something with authentication is wrong. I do see my LDAP users in the CLI. I can search the LDAP directory on the other machine.
      OMV 1.5 (Kralizec) VM on ESXi | HP Microserver | Snapraid
    • Re: [RESOLVED] Unable to log into gui

      Obviously your username or your password is wrong... Are you able to login via SSH? If yes, type in

      Source Code

      1. omv-firstaid
      and reset your webUI password.
      OMV stoneburner | HP Microserver | 256GB Samsung 830 SSD for system | 4x 2TB in a RAID5
      OMV erasmus| Odroid XU4 | 5TB Data drive | 500GB Backup drive
    • Re: [RESOLVED] Unable to log into gui

      "WastlJ" wrote:

      Obviously your username or your password is wrong... Are you able to login via SSH? If yes, type in

      Source Code

      1. omv-firstaid
      and reset your webUI password.

      Like I said in my post, I have tried all ideas. Done this already. It doesn't work.
      Yes, I can login via SSH as root. AFAIK root has the same password as the 'admin' webUI user. Correct? So password is not the issue.

      Just did another password reset via omv-firstaid and logged in with new password. My user.log says

      Source Code

      1. Jul 9 21:08:59 artemis php5: Unauthorized login attempt from xxx.xxx.xxx.xxx [username='admin', user-agent=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_4) AppleWebKit/537.77.4 (KHTML, like Gecko) Version/7.0.5 Safari/537.77.4]
      OMV 1.5 (Kralizec) VM on ESXi | HP Microserver | Snapraid
    • Re: [RESOLVED] Unable to log into gui

      admin is not the same user as root. What is the output of:

      cat /etc/passwd | grep ^admin
      cat /etc/passwd | grep ^openmediavault
      groups admin
      groups openmediavault
      ls -al /var/www/openmediavault/
      omv 4.1.12 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.11
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Re: [RESOLVED] Unable to log into gui

      Source Code

      1. # cat /etc/passwd | grep ^admin
      2. admin:x:998:100:WebGUI administrator:/home/admin:/usr/sbin/nologin
      3. # cat /etc/passwd | grep ^openmediavault
      4. openmediavault:x:999:999::/home/openmediavault:/bin/sh
      5. # groups admin
      6. admin : users
      7. # groups openmediavault
      8. openmediavault : openmediavault
      9. # ls -al /var/www/openmediavault/
      10. total 80
      11. drwxr-xr-x 8 openmediavault openmediavault 4096 Jul 8 16:35 .
      12. drwxr-xr-x 3 root root 4096 Jun 2 13:43 ..
      13. drwxrwxr-x 2 openmediavault openmediavault 4096 Jul 8 16:35 cgi
      14. drwxrwxr-x 2 openmediavault openmediavault 4096 Jul 8 16:35 css
      15. -rw-rw-r-- 1 openmediavault openmediavault 2367 Mar 14 14:25 download.php
      16. -rw-rw-r-- 1 openmediavault openmediavault 1150 Nov 2 2011 favicon.ico
      17. drwxrwxr-x 2 openmediavault openmediavault 20480 Jul 8 16:35 images
      18. -rw-rw-r-- 1 openmediavault openmediavault 1699 Mar 14 14:25 index.php
      19. drwxrwxr-x 3 openmediavault openmediavault 4096 Jul 8 16:35 js
      20. drwxrwxr-x 2 openmediavault openmediavault 4096 Jul 8 16:35 licenses
      21. -rwx------ 1 openmediavault openmediavault 1158 Jan 1 2014 php-fcgi
      22. drwxrwxr-x 2 openmediavault openmediavault 4096 Jul 8 16:35 rpc
      23. -rw-rw-r-- 1 openmediavault openmediavault 1486 Mar 14 14:25 rpc.php
      24. -rw-rw-r-- 1 openmediavault openmediavault 2502 Mar 14 14:25 rrd.php
      25. -rw-rw-r-- 1 openmediavault openmediavault 1640 Mar 14 14:25 shutdown.php
      26. -rw-rw-r-- 1 openmediavault openmediavault 2051 Mar 14 14:25 upload.php
      Display All


      There is no /home/openmediavault or /home/admin directory:

      Source Code

      1. # ls /home/
      2. ftp sabnzbd sickbeard
      OMV 1.5 (Kralizec) VM on ESXi | HP Microserver | Snapraid