[fixed] Powerwalker VI UPS Configproblem

  • Hey leute,


    ich versuche meine powerwalker usv mit dem plugin zum laufen zu bekommen, haut aber leider nicht hin.


    Im USV plugin habe ich stehen :


    Code
    Identifikation : S99UPS


    Code
    [S99UPS]
     driver = blazer_usb
     desc = "Powerwalker 1"
     port = auto
     vendorid = 0665
     productid = 5161
     bus = "005"


    Software des Herstellers WAR installiert, nachdem ich jedoch den agent starte, bekomme ich nur noch dies :


    Code
    Failed to execute command 'export LANG=C; update-rc.d 'nut' disable 2>&1': update-rc.d: using dependency based boot sequencing insserv: warning: current start runlevel(s) (empty) of script `nut' overwrites defaults (2 3 4 5). insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `nut' overwrites defaults (0 1 6). insserv: warning: script 'S99UPS' missing LSB tags and overrides insserv: There is a loop between service openmediavault-beep and S99UPS if stopped insserv: loop involving service S99UPS at depth 2 insserv: loop involving service openmediavault-beep at depth 1 insserv: Stopping S99UPS depends on openmediavault-beep and therefore on system facility `$all' which can not be true! insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header


    Details :


    Code
    Fehler #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; update-rc.d 'nut' disable 2>&1': update-rc.d: using dependency based boot sequencing insserv: warning: current start runlevel(s) (empty) of script `nut' overwrites defaults (2 3 4 5). insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `nut' overwrites defaults (0 1 6). insserv: warning: script 'S99UPS' missing LSB tags and overrides insserv: There is a loop between service openmediavault-beep and S99UPS if stopped insserv: loop involving service S99UPS at depth 2 insserv: loop involving service openmediavault-beep at depth 1 insserv: Stopping S99UPS depends on openmediavault-beep and therefore on system facility `$all' which can not be true! insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header' in /usr/share/php/openmediavault/initscript.inc:90 Stack trace: #0 /usr/share/php/openmediavault/initscript.inc(56): OMVSysVInitScript->update(true) #1 /usr/share/openmediavault/engined/module/nut.inc(72): OMVSysVInitScript->exec() #2 /usr/share/openmediavault/engined/rpc/config.inc(162): OMVModuleNetworkUPSTools->stopService() #3 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #4 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #5 /usr/share/openmediavault/engined/rpc/config.inc(253): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array) #6 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #7 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #8 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array) #9 /usr/sbin/omv-engined(495): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1) #10 {main}


    Wäre für Hilfe sehr dankbar, hab mich schon tot gegooglelt ... reboot ändert leider nichts


    edit : hab die software wieder runter geschmissen, seitdem keine meldung mehr

    | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

    2 Mal editiert, zuletzt von eimsbush ()

  • Installation von "supportinfo" haut mir dann sowas rein und bleibt genau da hängen.....


    AHHHHHHHHHH :o :( :roll: :cry:


    | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

  • | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

  • Ok hersteller software deinstalliert


    hab des hier in den mail lists gefunden


    mein system :


    Code
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial <---------------------------- usv
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 004: ID 04f3:0103 Elan Microelectronics Corp. 
    Bus 004 Device 003: ID 1908:0102 GEMBIRD 
    Bus 004 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc 
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    wo gesagt wird



    bin langsam am verzweifeln

    | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

  • blazer_usb



    blazer_ser

    | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

  • So, USV läuft ohne Support (bei über 50 klicks kein tip naja)


    Es lag daran das ich mehrere usb to serial geräte an meinem server hängen habe.


    die usv wird nur gefunden wenn alle anderen geräte mit udev fest verlinkt werden.


    dann reicht :

    Bilder

    | HP N54L Tobi´ 00 BIOS@2013 | 8GB 1333 | 2x WD-Black 320GB md0 / in TopDock | AMCC 9650SE-4LPML hwraid 4 x 3TB WD Green RAID5 mit BBU |
    | SlimLine Bluray in the Top Dock | Powerwalker 650 USV | Edimax WLAN | IcyBox 2x2TB RAID1 via eSATA |
    | Storage at the moment : 12.58TB |

  • Hallo,


    der Thread ist zwar schon ewig alt, aber anbei meine funktionierende Config für meine Powerwalker VI 650 SH USV:


    Code
    [powerwalker]
            driver = usbhid-ups
            port = auto
            desc = "powerwalker UPS"

    Grüße
    kaminkehrer

    Hallo,


    läuft es bei dir stabil?
    Bei mir lief es anfangs mit den Einstellungen (1 Tag), seit dem geht ständig die Verbindung zur USV verloren.
    Das Resultat sind 400 E-Mails am Tag


    Gruß
    Sven

  • Habe das gleiche Problem, denke aber mal das kommt nicht von der USV, sondern von den USB Treibern, die Ports werden zyklisch disconnected und neu angemeldet.


    Also orgendwas ist beim NUTS im argen...


  • Hallo!


    Hatte die selben Troubles wie oben beschrieben.


    Bei mir funkt. folgende Konf.:


    [powerwalker]
    driver = usbhid-ups
    port = auto
    pollinterval = 10
    desc = "powerwalker UPS"


    MfG


    M.A.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!