Hello!
I use Proxmox 3.2. I will test OMV as KVM-Guest.
KVM Config for OMV:
1 GByte Ram
1 Disk (ide0) with 8 GB for System
3 Disk (virtio{0,1,2}) with 32 GB for Date
1) install the System on the ide-Disk (Version: 0.5.53)
2) log into the admin interface
3) show under Storage -> Physical disks: I saw 1 (one) ide-Disk and 3 (three) virtio-Disks
4) go to Storage -> Raid Management: I create a Raid5 (named Raid5) with the 3 virtio disks; after finished -> I saw one active Device /dev/md0 with 3 disks (/dev/vd{a,b,c})
5) go to Storage -> File systems: I will create a File system, but can't select a device (no drive listed)
what am I doing wrong?
Rosi