OMV and Raspberry pi

    • OMV 1.0

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • OMV and Raspberry pi

      Hi,

      I'am trying to use OMV with my brand new RPI B+, but i a'm windows user (sorry for that guys), not a linux one..
      Anyway, i download the RPI image (omv_1.0.7_rpi.img.gz) and installed on my sd card. No specific problems, i can access to the web interface. But when i tried to add plugin, i have error message even when i try and update the plugin list :
      Failed to execute command 'export LANG=C; apt-get update 2>&1': Ign file: Release.gpg Ign file: Release Ign file: Translation-en Hit packages.openmediavault.org kralizec Release.gpg Hit debian.yeasoft.net wheezy Release.gpg Hit mirrordirector.raspbian.org wheezy Release.gpg Get:1 ftp.debian.org wheezy-backports Release.gpg [836 B] Hit archive.raspberrypi.org wheezy Release.gpg Hit packages.openmediavault.org kralizec Release Hit mirrordirector.raspbian.org wheezy Release Hit ftp.debian.org wheezy-backports Release Hit packages.omv-extras.org kralizec-backports Release.gpg Hit debian.yeasoft.net wheezy Release Hit archive.raspberrypi.org wheezy Release Hit packages.omv-extras.org kralizec Release.gpg Hit packages.openmediavault.org kralizec/main armhf Packages Hit mirrordirector.raspbian.org wheezy/main armhf Packages Ign ftp.debian.org wheezy-backports Release Hit mirrordirector.raspbian.org wheezy/contrib armhf Packages Hit packages.omv-extras.org kralizec-btsync Release.gpg Hit ftp.debian.org wheezy-backports/main armhf Packages Hit mirrordirector.raspbian.org wheezy/non-free armhf Packages Hit ftp.debian.org wheezy-backports/contrib armhf Packages Hit debian.yeasoft.net wheezy/main armhf Packages Hit archive.raspberrypi.org wheezy/main armhf Packages Hit mirrordirector.raspbian.org wheezy/rpi armhf Packages Hit packages.omv-extras.org kralizec-backports Release Hit ftp.debian.org wheezy-backports/non-free armhf Packages Ign packages.openmediavault.org kralizec/main Translation-en Hit packages.omv-extras.org kralizec Release Hit ftp.debian.org wheezy-backports/contrib Translation-en Hit ftp.debian.org wheezy-backports/main Translation-en Hit packages.omv-extras.org kralizec-btsync Release Hit ftp.debian.org wheezy-backports/non-free Translation-en Ign debian.yeasoft.net wheezy/main Translation-en Ign archive.raspberrypi.org wheezy/main Translation-en Hit packages.omv-extras.org kralizec/main armhf Packages Hit packages.omv-extras.org kralizec-btsync/main armhf Packages Ign mirrordirector.raspbian.org wheezy/contrib Translation-en Ign mirrordirector.raspbian.org wheezy/main Translation-en Ign mirrordirector.raspbian.org wheezy/non-free Translation-en Ign mirrordirector.raspbian.org wheezy/rpi Translation-en Ign packages.omv-extras.org kralizec/main Translation-en Ign packages.omv-extras.org kralizec-btsync/main Translation-en Fetched 836 B in 3s (229 B/s) W : GPG error: ftp.debian.org wheezy-backports Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AD6246925553 W: Failed to fetch packages.omv-extras.org/debian…ralizec-backports/Release Unable to find expected entry 'main/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files

      And the web interface is very slow.. Is it because the RPI version is not fully optimized? And what about the other image (omv_0.6.14_rpi.img.gz)? what's the difference between the two images? I'am sorry full newbie here!
      Thanks for your help..
    • Re: OMV and Raspberry pi

      Try logging in locally as root:

      apt-get update

      The web interface is slow because the RPi is slow. You can try raspi-config and set gpu memory to 16 mb and maybe overclock. The 0.6.14 is an older version. No need to try it.
      omv 4.0.19 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • Re: OMV and Raspberry pi

      Thanks for the answer..
      I try the command you gave me.
      But obviously, i'am not logged as root. I use the default user "Pi" and put into the "root" group into the web interface. But it seels not enought. Is there a default root user into the image?
    • Re: OMV and Raspberry pi

      How about 'root'?

      Password should be 'openmediavault'.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Re: OMV and Raspberry pi

      Yes. default password for root is: openmediavault

      Otherwise, you could do: sudo apt-get update
      omv 4.0.19 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • Hi guys,

      Still the same issue concerning plugins index. So i made a new install, a apt-get update as root, and update via the web interface. And each time i made an upadate trought web interface, i get an error message about index plugin such as this one :
      Creating index of OpenMediaVault plugins ...
      {"response":null,"error":{"code":7003,"message":"Failed to read from socket: Resource temporarily unavailable","trace":"exception 'OMVException' with message 'Failed to read from socket: Resource temporarily unavailable' in \/usr\/share\/php\/openmediavault\/rpc.inc:168\nStack trace:\n#0 \/usr\/sbin\/omv-rpc(107): OMVRpc::exec('Plugin', 'createIndex', Array, Array, 2)\n#1 {main}"}}

      So, isn't something missing somewhere for the raspberry pi version?

      Thanks,

      Mat
    • OMV doesn't have a different version for the RPi. The RPi is just slow. How many repos in omv-extras do you have enabled?

      Your SD card might also be slow and/or could by failing. Debian/OMV aren't very nice to SD cards and usb sticks due to the high number of writes.
      omv 4.0.19 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • Thanks Ryecoaaron.
      I have enable the 2 primary repos. Is there any custom ones i could add to improve that?
      I preparing a french tutorial for OMV on RPI, and i'am quite disapointed for now. I get that the RPI is slow and so on. But if i can't use plugin, i won't get a NAS, just an FTP server (wich is already quite good, but not the target).
    • The more repos enabled, the slower it is.

      Other than slowness, I really didn't have any problem with my RPi. The plugin list worked fine. I really do think your sd card might be failing.
      omv 4.0.19 arrakis | 64 bit | 4.14 backports kernel | omvextrasorg 4.1.2
      omv-extras.org plugins source code and issue tracker - github.com/OpenMediaVault-Plugin-Developers

      Please don't PM for support... Too many PMs!
    • So just for testing purposes I installed wheezy and OMV on top of my RasPi with my new SanDisk Extreme (45mb/s). I overclocked my RasPi and it runs very smooth and without errors actually. Therefore I agree with aaron that it might be your sd card which is either failing or just too slow.
      OMV stoneburner | HP Microserver | 256GB Samsung 830 SSD for system | 4x 2TB in a RAID5
      OMV erasmus| Odroid XU4 | 5TB Data drive | 500GB Backup drive
    • Thanks for the reply..
      I'am Ok with the speed issue, but the explanation for the plugin seems a little bit strange. This IT, it works or not, wether it's slow or not.. I also tried to dowload plugins and upload them via the web interface, i also get an error message :
      Failed to upload package 'openmediavault-btsync-master.zip'. The package name does not match the plugin naming convention.

      Can i use a command as root to launch the plugin install?
      WastlJ : can you give me your SD card accurate ref so that i can order the same?
      one more question : since the forum upadate, i do not receive any mail notification for new replies. I didn't find where to set that, is it still possible?
    • Do not upload the zip. Upload the deb file inside the zip.

      You must know that apt-get is really slow on the pi and to create and update the Plugin Index, all Plugins are simulated to be installed! Therefore it may be a good idea to just use the neccessarry repos!

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Chezmat wrote:

      can you give me your SD card accurate ref so that i can order the same?


      Sure. I tested with this card: amazon.com/SanDisk-Extreme-Fru…&keywords=sandisk+extreme

      There are even faster cards of SanDisk but this one was definitely fast enough.
      OMV stoneburner | HP Microserver | 256GB Samsung 830 SSD for system | 4x 2TB in a RAID5
      OMV erasmus| Odroid XU4 | 5TB Data drive | 500GB Backup drive
    • Hi Davidh2k,

      I find the .deb and tried to upload it, i get an error message :
      Failed to execute command 'export LANG=C; apt-get update 2>&1': Ign file: Release.gpg
      Ign file: Release
      Hit mirrordirector.raspbian.org wheezy Release.gpg
      Hit packages.openmediavault.org kralizec Release.gpg
      Hit archive.raspberrypi.org wheezy Release.gpg
      Ign file: Translation-en
      Hit mirrordirector.raspbian.org

      My SD card is a sandisk class 10 (not an "extreme" as WastlJ), but quite not a slow card anyway.
      May i add that as a window user, i have to use a soft to install the image on the SD card. Maybe the issue coming from that. I can't use the program from the wiki and used "Win32DiskImager".
    • I guess you're missing some of the error output? Execute the following via CLI and post the full output here:

      Source Code

      1. export LANG=C; apt-get update


      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Hello,

      Sorry, i was on vacation.. Here is the result of the command :

      Source Code

      1. root@raspberrypi:~# export LANC=C; apt-get update
      2. Ign file: Release.gpg
      3. Ign file: Release
      4. Ign file: Translation-en_GB
      5. Ign file: Translation-en
      6. Hit http://packages.openmediavault.org kralizec Release.gpg
      7. Hit http://mirrordirector.raspbian.org wheezy Release.gpg
      8. Hit http://archive.raspberrypi.org wheezy Release.gpg
      9. Hit http://mirrordirector.raspbian.org wheezy Release
      10. Hit http://packages.openmediavault.org kralizec Release
      11. Hit http://archive.raspberrypi.org wheezy Release
      12. Hit http://mirrordirector.raspbian.org wheezy/main armhf Packages
      13. Hit http://mirrordirector.raspbian.org wheezy/contrib armhf Packages
      14. Hit http://packages.openmediavault.org kralizec/main armhf Packages
      15. Hit http://packages.omv-extras.org kralizec Release.gpg
      16. Hit http://archive.raspberrypi.org wheezy/main armhf Packages
      17. Hit http://mirrordirector.raspbian.org wheezy/non-free armhf Packages
      18. Hit http://mirrordirector.raspbian.org wheezy/rpi armhf Packages
      19. Hit http://packages.omv-extras.org kralizec Release
      20. Hit http://packages.omv-extras.org kralizec/main armhf Packages
      21. Ign http://archive.raspberrypi.org wheezy/main Translation-en_GB
      22. Ign http://archive.raspberrypi.org wheezy/main Translation-en
      23. Ign http://packages.openmediavault.org kralizec/main Translation-en_GB
      24. Ign http://packages.openmediavault.org kralizec/main Translation-en
      25. Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_GB
      26. Ign http://packages.omv-extras.org kralizec/main Translation-en_GB
      27. Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
      28. Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_GB
      29. Ign http://packages.omv-extras.org kralizec/main Translation-en
      30. Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
      31. Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_GB
      32. Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
      33. Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_GB
      34. Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
      35. Creating index of upgradeable packages ...
      36. Creating index of OpenMediaVault plugins ...
      37. {"response":null,"error":{"code":7003,"message":"Failed to read from socket: Resource temporarily unavailable","trace":"exception 'OMVException' with message 'Failed to read from socket: Resource temporarily unavailable' in \/usr\/share\/php\/openmediavault\/rpc.inc:168\nStack trace:\n#0 \/usr\/sbin\/omv-rpc(107): OMVRpc::exec('Plugin', 'createIndex', Array, Array, 2)\n#1 {main}"}}
      38. E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
      39. E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
      Display All