Rsync Unknown module error

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Rsync Unknown module error

      I have 2 OMV servers setup, the backup one is a mirror of the main one. I want to pull the data using the backup server.

      I have added the FW route on the main server- backup source - main dest - dest port 873

      I have enabled my rsync server on the main box

      on the backup side I have rsync job setup as remote/pull. Source server = rsync://user1@192.168.1.51/Software/

      When I run it i get the following.

      Rsync Job log

      rsync error: error starting client-server protocol (code 5) at main.c(1524) [Receiver=3.0.7]

      @ERROR: Unknown module ‘Software’

      Rsync Server log

      Unknown module ‘Software’ tried from OMV.local (192.168.1.40)

      Connect from OMV.local (192.168.1.40)

      I think my source is wrong but I have changed it every way i can think...

      The share folder name is Software on volume /dev/sbd1/

      Any ideas?

      Thank you
    • You probably have a '::' instead of ':' in your rsync syntax. Fix that and the error should be gone.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • It should just be one ':'.

      If the error persists post a screenshot of the configured rsync job in the WebGUI here.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Try '51::Software' or '51::/Software' or '51:Software' or '51:/Software' instead.

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.
    • Thanks David....This is what I did

      changed the job to try each one and is what was output in the job window

      51::Software

      [Receiver]
      rsync error: unexplained error (code 255) at io.c(601) [Receiver=3.0.7]

      ::/Software

      [Receiver]
      rsync error: unexplained error (code 255) at io.c(601) [Receiver=3.0.7]

      :Software


      [Receiver]
      rsync error: unexplained error (code 255) at io.c(601) [Receiver=3.0.7]

      :/Software

      0.7]

      Logs show this for each job run

      Unknown module ‘Software’ tried from OMV.local (192.168.1.40)

      Connect from OMV.local (192.168.1.40)
    • <Davidh2k> rsync ueber ssh geht nicht via gui


      Hallo Davidh2k,

      ich verwende OMV 1.9 und versuche einen rsync zu erstellen.
      Leider funktioniert das nicht.
      OMV 1.9 ist in Virtualbox installiert.
      Eine ssh Verbindung kann ich herstellen.
      Als admin kann ich mich auf dem Webinterface einloggen.
      Zwei Virtuelle HDDs habe ich angelegt.
      Einen User "openmedianer" habe ich angelegt.
      Den Ordner /openmedianer habe bei rsync in Server - Module angelegt.

      Führe ich den Job als admin aus, erhalte ich folgende Fehlermeldung:

      Source Code

      1. Please wait, syncing </media/3a5f34d5-2b24-4a84-9406-7f205cc450b9/openmedianer//> to <rsync:/user@192.168.178.42::/home/user/Bilder/> ...
      2. ]
      3. rsync error: unexplained error (code 255) at io.c(605) [sender=3.0.9]


      Als eingeloggter User "openmedianer" habe ich nicht die Möglichkeit einen rsync zu starten.

      Weitere Fehlermeldungen wie hier schon beschrieben:

      Rsync Unknown module error


      Hi,did you add the module on the destination rsync server in the rsync settings

      Was ist damit gemeint?

      Wie löse ich das Problem?
      Wie suche ich den Fehler?

      Oder bin ich wieder da ------------------------------->
      <Davidh2k> rsync ueber ssh geht nicht via gui



      Es funktioniert im Terminal von Kubuntu 14.04.2 wie folgt:

      Source Code

      1. rsync -avr /home/user/Bilder rsync://192.168.178.71/openmedianer


      Es funktioniert im Terminal, wenn man sich im OpenMediaVault als root eingeloggt hat und zwei wie folgt:

      Source Code

      1. rsync -avzbe ssh user@192.168.178.42:/home/user/Bilder /media/3a5f34d5-2b24-4a84-9406-7f205cc450b9/openmedianer/


      Den ssh Terminal habe ich bei diesem Versuch gewählt, weil ich mit copy und paste die UUID kopieren kann. Solche Aktionen als root ausführen halte ich auch für nicht geeignet.


      Warum funktioniert es mit der OpenMediaVault WEB-GUI nicht?

      Was habe ich in der OpenMediaVault 1.9 rsync WEB-GUI richtig einzugeben?



      The post was edited 21 times, last by openmedianer ().

    • openmedianer wrote:

      rsync -avzbe ssh


      Jau, und über SSH gehts nur via CLI/Script. Ich selbst habs auch nur so via SSH am laufen... Vllt. kann jemand andres mal einspringen und erklären wie rsync ohne ssh funzt.

      @all: Anybody care to explain how you setup rsync without ssh. ;)

      Greetings
      David
      "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"

      Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.


      Upload Logfile via WebGUI/CLI
      #openmediavault on freenode IRC | German & English | GMT+1
      Absolutely no Support via PM!

      I host parts of the omv-extras.org Repository, the OpenMediaVault Live Demo and the pre-built PXE Images. If you want you can take part and help covering the costs by having a look at my profile page.