Your hard drives are most likely good. Wipe them and you should be ok. You always get errors on the hard drives when you have bad ram....
Again system hangs
-
-
-
There is a button on the Physical Disks page.
-
Hello,
today i would wipe one disk of a 2 disk raid1 with the button you named.
This worked until 100% with secure wiping.But after it, the 4 smart errors (as above) are still available.
Also the Raids show, that the disk is included???The question now is, what is on the disk in reality??? Are there 1 and 0 randomly or are really the raid1 data???
How can i check the content of every single disk in a raid?
Would be bad, if the second disk crashes and the first disk wasn´t really mounted with the data???Greets
-
IIRC: Connect the disk to another PC with linux and you should see, if there is data on the disk
You can try http://gparted.sourceforge.net/ for this.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!