My nas doen't work anymore after a while

  • yes I can install another hard drive on system.
    please find df -h output as below:
    Filesystem size Used Avial Use% Mounted on
    /dev/sdc1 3.5G 740M 2.6G 23% /
    tmpfs 2.0G 0 2.6G 0% /lib/init/rw
    udev 2.0G 168K 2.0G 1% /dev
    tmpfs 2.0G 0 2.0G 0% /dev/shm
    tmpfs 2.0G 0 2.0G 0% /tmp
    /dev/md127 917G 29G 889G 4% /media/8c1506de-b680-4404-9002-398cc5163df5


    Also please see apt-get clean command output: Nothing happened I think because of I did that before from omv-extras plugin.

  • Your nand is not even close to being full. It is not working right. Get a small hard drive or SSD. Disconnect all the other hard drives. Have only the new system drive connected and install again. Once installed turn off machine and reconnect your other hard drives again. Start system and your raid should show in the webgui and be available to mount.

  • Please be informed that updating kernel backport to 3.2 beside installing anew fresh OMV worked for me. I I didn't replace NAND but I did all of your suggestion specially in case of updating backport via OMV-EXTRAS. I think my network card update driver via updating or something like that removed the issue.
    Anyway thank again for your cooperation

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!