WD MyCloud

  • Hello together. At first sorry for my bad english.


    At yesterday i had a little problem with my WDMCMG2.


    Before 2 Days i flashed DSM from http://fox-exe.ru/WDMyCloud/WDMyCloud-Mirror-Gen2/DSM/
    I enabled ssh at first in the DSM Settings because its importend


    The Installation-Process and Setup was problemless and my WD is working fine.
    I dont plugged out or shutdown over night


    Next day i went again to the WebGUI but nothing happens anymore, only a blank Site.


    Then I have tested some things:
    Cold Restart (plug out Power)
    Remove Disks and Re-insert and Restart
    Pressing the Reset Button a few Times
    tryed to connect via https on port 5001 is the same like http on port 5000 or 80 - only a blank Site (used Firefox and Chrome)


    If I test to connect via ssh and telnet - no way because the Ports are closed


    the output of nmap says


    PORT STATE SERVICE
    80/tcp open http
    139/tcp open netbios-ssn
    161/tcp open snmp
    443/tcp open https
    445/tcp open microsoft-ds
    5000/tcp open upnp
    5001/tcp open commplex-link


    no ssh or telnet support :(


    I hope somebody has any solution for this (little) Problem


    Oh and i'm using Linux/Xubuntu if its importend to find the Problem



    Many thanks in advance for your help :)

  • Hello, you can use this manual:


    http://fox-exe.ru/WDMyCloud/WDMyCloud-Mirror-Gen2/Debian/



    http://fox-exe.ru/WDMyCloud/WD…ror-Gen2/Debian/_info.txt

    Please contact fox-exe supports your device "WD My Cloud Home".


    https://community.wd.com/t/cle…and-other-firmwares/93714

    Best Regards


    openmedianer

  • Hello everyone, I am kind of reviving this old thread for a couple of questions to you, please, as I have a WD MyCloud (1st Generation, I think, model WDBCTL0020HWT with 2TB) and the disk fails SMART constantly. Before sending it for recycling (and weeping for the money lost) please can I kindly ask you:


    a) Does your procedure work for a replacement, virgin HDD, say of same capacity? Do I need to "transfer" some boot files/procedure from the old HDD? (disk still runs but fails in writing data etc.)


    b) What is the latest OMV that can run on this ARM board, and being compatible with the Gigabit LAN Port and USB port? I read OMV 1.x as OMV 2.x may not support the LAN as fast as WD (driver?) just wanted to reconfirm what svriderk3 wrote +1 year ago.


    Would it be worth the money for a new 2/4TB HDD plus the time spent trying to install OMV on this?


    Thank you in advance for your time, best regards, Season Greetings.

    OpenMediaVault 6.9.13-1 • Intel NUC NUC6CAYH • Intel Celeron J3455 • 2x4GB RAM • Samsung 870 QVO 4TB • USB Boot (System)

    Einmal editiert, zuletzt von Konsti ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!