Temperature CPU?

  • Does it still show when you run sensors


    Run sh -x /usr/share/openmediavault/mkconf/sensors and give me the results, remember to only enable the CPU temp.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • and


    the attachment for sh -x /usr/share/openmediavault/mkconf/sensors

  • Code
    rm /usr/share/openmediavault/mkconf/sensors
    wget -O /usr/share/openmediavault/mkconf/sensors https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/openmediavault-sensors/master/usr/share/openmediavault/mkconf/sensors
    chmod +x /usr/share/openmediavault/mkconf/sensors
    /usr/share/openmediavault/mkconf/sensors

    Update the script again, refresh the webui and then check graphs.


    If it still does not work can you check if /var/lib/rrdcached/db/localhost/ has a folder called something like sensors-it877....
    If it does have the folder can you re-run the debug command again, making sure you have enabled CPU temp.


    Thanks

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • Sorry, but no graphs again....


    I don't have the folder you tell me....

  • Hi,


    I tried also to disable coretemp module and refresh sensors with /usr/share/openmediavault/mkconf/sensors but nothing changed in my sad graphics... ?(


    Have you new ideas?


    Thankyou for assistance.

  • @Ambro72 You need to have the folder, if it is not there it will not work. See if you can get it to show by following what @alexicon posted above.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • I follow alexicon's instructions but this is the output:

    Of course I relunch commands to regenerate sensors conf... so there isn't the folder.


    What is acpi_enforce_resources=lax? I see in internet that may be dangerous for the hardware. Is it safe?


    Thankyou

  • The plugin works under OMV 4. I had it installed when i upgraded and it's working fine.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • I installed the plugin on the OMV 4.0.15-1 and switching-on in the Services -> Sensors CPU Temperature, Show Cores and MB Temperature. There were graphs in Diagnostics -> System Informaton -> Performance statistics -> OMV Sensors. But these graphics are not updated, but stand still. The Refresh button does not help. The graphs are updated only if I make the switching-off / switching-on and Save Apply in the Services -> CPU Temperature or Show Cores or MB Temperature or all off/on. The remaining graphics in Performance statistics are updated normally.

  • Hi,


    I've recently tested the plugin on a NanoPi Neo2 and it seems that this CPU temperature sensor is not supported yet.

    Code
    root@localhost:~# sensors
    iio_hwmon-isa-0000
    Adapter: ISA adapter
    temp1:        +35.2°C


    Would it be possible to support a CPU with just 1 temperature sensor?


    Regards,
    Timeless

  • I try to use the plugin on 2 omv machinesfo testing.
    Both are running with the 3.16.0-5-amd64.
    My issue on the first one ist that only the cpu teperature is showing as a graph all other are "empty".

    any ideas ?


    Tom

  • I installed the latest plugin on OMV4, but complained with the following message


    Bash
    sudo omv-mkconf sensors
    
    
    sed: can't read /usr/sbin/omv-mkgraph: No such file or directory

    is this omv-mkgraph replaced by something else in OMV4?
    My omv4 is installed from scratch.

  • But what if you have a fresh install of OMV 4? It is not listed in the plugins list, how can I install it?

    You can't.


    There is no version compatible with OMV4, and I doubt very much there ever will be, sorry. :(

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    • Offizieller Beitrag

    Any news for OMV4 ? Almost middle of 2019 is here..

    Nope. No one is working on it.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!