openmediavault-pxe first version now available for testing

  • @davidh2k, @ryecoaaron,


    es ist recht ruhig um das Plugin geworden; soll ich noch ein paar Images von aktuelleren Distributionen machen? Falls ja, von welchen?


    Viele Grüße.



    it's quite quiet around the plugin; should I still make some images of more recent distributions? If so, from which?
    Best regards.

    2 BananaPi, 1 OrangePiPC+, 1 OrangePiPC with OMV 6.0.x

  • Seas omavoss,


    Netinstall: Debian Stretch, SolusOS und Fedora


    Live: Kali 2017.1, Tails und Partitionmagic


    :)


    Lg,
    rowie


    Gesendet von meinem SM-G935F mit Tapatalk

    HP Proliant Gen8 with ESXi6.5


    Storage - Raid5 with 4 x 3TB WDRed - System on microSD / Datastore on Samsung 850Pro - 250GB

    • Offizieller Beitrag

    Partitionmagic

    You either mean PartedMagic (not free) or gparted-live. PartitionMagic was a pretty good windows program back in the day though :)

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • @rowie
    welches Kali-Linux meinst Du?


    https://www.kali.org/downloads/


    PartedMagic ist ein Teil von UBCD, dafür gibt es bereits ein fertiges PXE-Image für OMV.


    Debian Stretch gibt es auch eine ganze Reihe von Versionen, ebenso Fedora. Dein "Wunschzettel" ist ein wenig zu allgemein. Ich dachte auch eher daran, ein paar PXE-Images von Distris zu machen, die ein wenig länger Bestand haben, etwa Distris mit LTS-Support und keine Exoten und relativ kurzlebige Distributionen.


    SolusOS schaue ich mir an. Tails ist eher als portables System konzipiert und ist m.E. auf einem PXE-Server wenig bis nichts wert.


    Wenn du Lust hast, kannst Du dich gern auch daran versuchen, selbst PXE-Images der von Dir gewünschten Distris zu machen. Eine gute Anleitung dafür hat @davidh2k in diesem Thread geschrieben. :)


    Viele Grüße.

    2 BananaPi, 1 OrangePiPC+, 1 OrangePiPC with OMV 6.0.x

  • Hi omavoss,


    Also ich nutze den pxs bei mir zuhause hautsächlich wenn ich eine neue vm erstele oder den rechner eines freundes neu install. Hauptgrund ist, ich will mir die ständige usb-stick flasherei ersparen.
    Bei debian oder fedora nehme ich dazu immer die netinstall x86_64. 32bit braucht eh kein mensch mehr.
    zum festplattenlöschen boote ich eine partedmagic-vm und reiche die Platte per usb3 durch an die vm.
    Ich hab auch ein paar kleine kleine alix und minisysteme die ich gerne mit livedistris wie tails oder kali betreibe. Entweder mit oder oder persistenter datenträuger die ich per nfs automatisch einbinde..


    Kali2017.1 und der netinstaller von stretch wollen ums verrecken nicht booten .. drum mein post! ;)


    Ich hab schon einige images damals erstellt aber die sind halt leider nicht frei. Wie zb. Acronis und eben die bezahlversion von partedmagic.




    Gesendet von meinem SM-G935F mit Tapatalk

    HP Proliant Gen8 with ESXi6.5


    Storage - Raid5 with 4 x 3TB WDRed - System on microSD / Datastore on Samsung 850Pro - 250GB

    • Offizieller Beitrag

    I have a problem I installed today OMV 3.08 and all the adds needed for PXE. I do not know why I can not download img

    The server that serves the list (and images) must be down. You don't have to use the images. They are kind of outdated anyway.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • @davidh2k, @ryecoaaron,


    ich habe OMV 4.1.8.2-1 (Arrakis) installiert und den gesamten Thread bis hierhin durchgeackert, leider bekomme ich den PXE-Server nicht (mehr) zum laufen. Es lassen sich weder der TFTP-Dienst aktivieren noch die Einstellungen des PXE-Servers speichern.



    Was muss ich tun?


    I have OMV 4.1.8.2-1 (Arrakis) installed and worked through the entire thread to this point, unfortunately I do not get the PXE server (more) to run. You can neither enable the TFTP service nor save the settings of the PXE server.


    What do I have to do?

    2 BananaPi, 1 OrangePiPC+, 1 OrangePiPC with OMV 6.0.x

    Einmal editiert, zuletzt von omavoss ()

    • Offizieller Beitrag

    I've been on a beach for the last week...


    Do you have the tftp plugin installed and configured?

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Offizieller Beitrag

    What is the output of the two commands listed in the error message (journalctl and systemctl commands)?

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • root@TERRA2:~# systemctl start tftp-hpa
    Failed to start tftp-hpa.service: Unit tftp-hpa.service not found.
    root@TERRA2:~#


    root@TERRA2:~# systemctl status tftpd-hpa.service
    ● tftpd-hpa.service - LSB: HPA's tftp server
    Loaded: loaded (/etc/init.d/tftpd-hpa; generated; vendor preset: enabled)
    Active: failed (Result: exit-code) since Sun 2018-07-15 16:42:08 CEST; 20min ago
    Docs: man:systemd-sysv-generator(8)
    Process: 1821 ExecStart=/etc/init.d/tftpd-hpa start (code=exited, status=66)


    Jul 15 16:42:07 TERRA2 systemd[1]: Starting LSB: HPA's tftp server...
    Jul 15 16:42:08 TERRA2 in.tftpd[1827]: Cannot open map file: /etc/tftp_remap.conf: No such file or directory
    Jul 15 16:42:08 TERRA2 tftpd-hpa[1821]: Starting HPA's tftpd: in.tftpd
    Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Control process exited, code=exited status=66
    Jul 15 16:42:08 TERRA2 systemd[1]: Failed to start LSB: HPA's tftp server.
    Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Unit entered failed state.
    Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Failed with result 'exit-code'.
    root@TERRA2:~#


    root@TERRA2:~# journalctl -xe
    -- Logs begin at Sun 2018-07-15 16:40:30 CEST, end at Sun 2018-07-15 17:03:42 CEST. --
    Jul 15 16:40:30 TERRA2 kernel: Normal zone: 196608 pages, LIFO batch:31
    Jul 15 16:40:30 TERRA2 kernel: Reserved but unavailable: 98 pages
    Jul 15 16:40:30 TERRA2 kernel: Reserving Intel graphics memory at [mem 0xcf800000-0xcfffffff]
    Jul 15 16:40:30 TERRA2 kernel: ACPI: PM-Timer IO Port: 0x408
    Jul 15 16:40:30 TERRA2 kernel: ACPI: Local APIC address 0xfee00000
    Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Jul 15 16:40:30 TERRA2 kernel: IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    Jul 15 16:40:30 TERRA2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jul 15 16:40:30 TERRA2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 15 16:40:30 TERRA2 kernel: ACPI: IRQ0 used by override.
    Jul 15 16:40:30 TERRA2 kernel: ACPI: IRQ9 used by override.
    Jul 15 16:40:30 TERRA2 kernel: Using ACPI (MADT) for SMP configuration information
    Jul 15 16:40:30 TERRA2 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jul 15 16:40:30 TERRA2 kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf590000-0xcf5e2fff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
    Jul 15 16:40:30 TERRA2 kernel: e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
    Jul 15 16:40:30 TERRA2 kernel: Booting paravirtualized kernel on bare hardware
    Jul 15 16:40:30 TERRA2 kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
    Jul 15 16:40:30 TERRA2 kernel: random: get_random_bytes called from start_kernel+0x94/0x4e5 with crng_init=0
    Jul 15 16:40:30 TERRA2 kernel: setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
    Jul 15 16:40:30 TERRA2 kernel: percpu: Embedded 44 pages/cpu @ (ptrval) s142296 r8192 d29736 u524288
    Jul 15 16:40:30 TERRA2 kernel: pcpu-alloc: s142296 r8192 d29736 u524288 alloc=1*2097152
    Jul 15 16:40:30 TERRA2 kernel: pcpu-alloc: [0] 0 1 2 3
    Jul 15 16:40:30 TERRA2 kernel: Built 1 zonelists, mobility grouping on. Total pages: 1029442
    Jul 15 16:40:30 TERRA2 kernel: Policy zone: Normal
    Jul 15 16:40:30 TERRA2 kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-0.bpo.2-amd64 root=UUID=08413f62-d10b-4b54-916d-a1c1aa3b5387 ro quiet
    Jul 15 16:40:30 TERRA2 kernel: Calgary: detecting Calgary via BIOS EBDA area
    Jul 15 16:40:30 TERRA2 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Jul 15 16:40:30 TERRA2 kernel: Memory: 3997176K/4183224K available (10252K kernel code, 1182K rwdata, 3132K rodata, 1528K init, 688K bss, 186048K reserved, 0K cma-reserved)
    Jul 15 16:40:30 TERRA2 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jul 15 16:40:30 TERRA2 kernel: Kernel/User page tables isolation: enabled
    Jul 15 16:40:30 TERRA2 kernel: ftrace: allocating 29921 entries in 117 pages
    Jul 15 16:40:30 TERRA2 kernel: Hierarchical RCU implementation.
    Jul 15 16:40:30 TERRA2 kernel: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
    Jul 15 16:40:30 TERRA2 kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    Jul 15 16:40:30 TERRA2 kernel: NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
    Jul 15 16:40:30 TERRA2 kernel: Console: colour VGA+ 80x25
    Jul 15 16:40:30 TERRA2 kernel: console [tty0] enabled
    Jul 15 16:40:30 TERRA2 kernel: ACPI: Core revision 20180105
    Jul 15 16:40:30 TERRA2 kernel: ACPI: 2 ACPI AML tables successfully acquired and loaded
    Jul 15 16:40:30 TERRA2 kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
    Jul 15 16:40:30 TERRA2 kernel: hpet clockevent registered
    Jul 15 16:40:30 TERRA2 kernel: APIC: Switch to symmetric I/O mode setup
    Jul 15 16:40:30 TERRA2 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    --More--


    and more and more and at the end:


    -- Unit tftpd-hpa.service has begun starting up.
    Jul 15 17:03:42 TERRA2 in.tftpd[2871]: Cannot open map file: /etc/tftp_remap.conf: No such file or directory
    Jul 15 17:03:42 TERRA2 tftpd-hpa[2865]: Starting HPA's tftpd: in.tftpd
    Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Control process exited, code=exited status=66
    Jul 15 17:03:42 TERRA2 systemd[1]: Failed to start LSB: HPA's tftp server.
    -- Subject: Unit tftpd-hpa.service has failed
    -- Defined-By: systemd
    -- Support: https://www.debian.org/support
    --
    -- Unit tftpd-hpa.service has failed.
    --
    -- The result is failed.
    Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Unit entered failed state.
    Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Failed with result 'exit-code'.
    root@TERRA2:~#

    2 BananaPi, 1 OrangePiPC+, 1 OrangePiPC with OMV 6.0.x

    3 Mal editiert, zuletzt von omavoss ()

    • Offizieller Beitrag

    Remove the remap file option from the tftp plugin to see if it starts.

    omv 7.0-32 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.9 | compose 7.0.9 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Hi, i want to point an error in tftp-remap.conf .
    It is there for some time, because i remember that wast time that i try to make pxe boot windows there was the same error, and cost me so much time to find it out like now :)
    and that was more than year ago .


    So the error is on last row : now is

    • rg \ /
    • and has to be
    • rg \\ /
    • this make windows to give : file boot bcd error code 0xc00000f

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!