Upgraded - WebGUI loop - Not fixed

BazzUK · 22. September 2014

Info:

Upgraded from 0.6 to 1.0 via CLI upgrade process.
Unknown exact version (read on)

So, I upgraded without too much hassle, I had samba access, SSH and I had WebGUI access, but since the machine rebooted I am now unable to login to the WebGUI.
Samba still works, SSH is fine, I have read/write access etc. just no WebGUI access.
I did read about a full disk (I have 5x 2TB in RAID 5 currently with 1.34TB free and a 60GB boot with virtually nothing on it)

I try and login using set login & password, even tried omg-firstaid to change, but still unable to get in.

Any assistance? if it comes to it, I will reinstall from new, because I have tried to resolve this now for 2 hours without any success (and yes I have read around the forums)

Due to not having access to the WebGUI I do not know the exact version.........:(

With dpkg -l | grep openmediavault it shows the following:

Code

root@OMV1:~# dpkg -l | grep openmediavault
ii  openmediavault                     1.0.22                        all          Open network attached storage solution
pc  openmediavault-extplorer           1.0.3                         all          OpenMediaVault eXtplorer plugin
ii  openmediavault-keyring             0.3                           all          GnuPG archive keys of the OpenMediaVault archive
rc  openmediavault-links               0.6.4                         all          OpenMediaVault links plugin
rc  openmediavault-omvextrasorg        1.0.7                         all          OMV-Extras.org Package Repositories for OpenMediaVault
rc  openmediavault-owncloud            1.1.2                         all          OpenMediaVault ownCloud plugin
rc  openmediavault-supportinfo         0.5.12                        all          OpenMediaVault support panel

Tried:

Code

omv-mkconf nginx
omv-mkconf php5fpm
service apache2 stop
service php5-fpm restart
service nginx restart

No idea what to try now??

Hang on I see I am using v1.0.22 (I see it now)

Cheers in advance

ryecoaaron · 22. September 2014

apt-get purge openmediavault-extplorer
apt-get -f install

BazzUK · 22. September 2014

Zitat von ryecoaaron

apt-get purge openmediavault-extplorer
apt-get -f install

Wow super fast reply thanks.

Output of the commands:

Code

root@OMV1:~# apt-get purge openmediavault-extplorer
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
  openmediavault-extplorer*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
(Reading database ... 32467 files and directories currently installed.)
Removing openmediavault-extplorer ...
Purging configuration files for openmediavault-extplorer ...
userdel: user 'extplorer' does not exist
dpkg: error processing openmediavault-extplorer (--purge):
 subprocess installed post-removal script returned error exit status 6
Errors were encountered while processing:
 openmediavault-extplorer
Creating index of upgradeable packages ...
Creating index of OpenMediaVault plugins ...
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@OMV1:~# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Alles anzeigen

ryecoaaron · 22. September 2014

Try:
apt-get remove openmediavault-extplorer
service nginx restart

BazzUK · 22. September 2014

Zitat von ryecoaaron

Try:
<code class="inlineCode">apt-get remove openmediavault-extplorer</code>
<code class="inlineCode">service nginx restart</code>

Code

root@OMV1:~# apt-get remove openmediavault-extplorer
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'openmediavault-extplorer' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@OMV1:~# service nginx restart
Restarting nginx: nginx.
root@OMV1:~#

Strange response, but still no WebGUI login (I see the screen, it takes the login and password, then loops still, if I try false info, it does show error)

ryecoaaron · 22. September 2014

Try rebooting and/or clearing cache/ different browser

BazzUK · 22. September 2014

Also extplorer is still there - output of dpkg -l | grep openmediavault

Code

root@OMV1:~# dpkg -l | grep openmediavault
ii  openmediavault                     1.0.22                        all          Open network attached storage solution
pc  openmediavault-extplorer           1.0.3                         all          OpenMediaVault eXtplorer plugin
ii  openmediavault-keyring             0.3                           all          GnuPG archive keys of the OpenMediaVault archive
rc  openmediavault-links               0.6.4                         all          OpenMediaVault links plugin
rc  openmediavault-omvextrasorg        1.0.7                         all          OMV-Extras.org Package Repositories for OpenMediaVault
rc  openmediavault-owncloud            1.1.2                         all          OpenMediaVault ownCloud plugin
rc  openmediavault-supportinfo         0.5.12                        all          OpenMediaVault support panel

BazzUK · 22. September 2014

Rebooting now, 2 mins

BazzUK · 22. September 2014

Still the same result

BazzUK · 22. September 2014

The results are in Chrome, but if I used IE11 it shows:

Code

Welcome to nginx!

Nothing else!

ryecoaaron · 22. September 2014

Zitat

omv-mkconf nginx
omv-mkconf php5fpm
service apache2 stop
service php5-fpm restart
update-rc.d -f apache2 remove
service nginx restart

BazzUK · 22. September 2014

OK, so I tried the above, and the IE11 page now shows login box, though I cannot login to either browsers

I tried omv-firstaid too

BazzUK · 22. September 2014

Now anything I put in the login or password field, correct or not gives failed login??

ryecoaaron · 22. September 2014

df -h

BazzUK · 22. September 2014

Code

root@OMV1:~# df -h
Filesystem                                              Size  Used Avail Use% Mounted on
rootfs                                                   53G   51G     0 100% /
udev                                                     10M     0   10M   0% /dev
tmpfs                                                   394M  392K  394M   1% /run
/dev/disk/by-uuid/b62e6df1-0b3a-46c6-a8e8-cd1a44372f73   53G   51G     0 100% /
tmpfs                                                   5.0M     0  5.0M   0% /run/lock
tmpfs                                                   1.3G  4.0K  1.3G   1% /run/shm
tmpfs                                                   2.0G   32K  2.0G   1% /tmp
/dev/md127                                              7.2T  5.9T  1.4T  82% /media/a3ebfc7e-432d-4fd8-b07e-24bf85dba2eb

Question, why is rootfs showing 100%??
Also what is /dev/disk/by-uuid/b62e6df1-0b3a-46c6-a8e8-cd1a44372f73 ??

BazzUK · 22. September 2014

OK, I do not know what has happened, but I just did a

Code

apt-get clean && reboot

And all is fine.

Please mark as solved

Thank you for your assistance.

ryecoaaron · 22. September 2014

The drive was full. You might have a log filling up or an rsync job writing to the OS drive.

BazzUK · 22. September 2014

OK thanks, possibly a log file, I do not rsync.
Thank you

BazzUK · 23. September 2014

Not fixed, I can't login again today

Worked yesterday, but since the fix (?) it would seem without rebooting I can no longer login!

WastlJ · 23. September 2014

would you please give again

Code

df -h

Jetzt mitmachen!