Welcome to nginx after upgrade

cliaze · 16. Oktober 2014

Hi,

I've recently attempted to upgrade my OMV install from 0.5. to 1.0. using this guide. However I am now faced with a Welcome to nginx screen when accessing the box via the Web GUI. The Transmission GUI seems to be working without any issues however. I've followed the steps listed here but the fault still remains. The shares seem to be accessible and there are no issues with accessing the box via SSH. The box has also been rebooted a couple of times.

I've flushed my browsers cache and attempted access via incognito mode but I am faced with the same message each time. I've also tried in a different browser to no avail.

Has anyone got any suggestions on what else I could check to resolve this fault? If you require any log files or output's please post the command and I will be happy to supply them.

Regards,

ryecoaaron · 16. Oktober 2014

What is the output of:

dpkg -l | grep openmediavault
ls -al /etc/nginx/sites-enabled/

cliaze · 16. Oktober 2014

As requested;

Code

root@chaos:~# dpkg -l | grep openmediavault
iU  openmediavault                     1.0.27.3                       all          Open network attached storage solution
ii  openmediavault-backup              0.5.2                          all          backup plugin for OpenMediaVault.
iU  openmediavault-clamav              1.0.1                          all          OpenMediaVault ClamAV plugin
ii  openmediavault-keyring             0.3                            all          GnuPG archive keys of the OpenMediaVault archive
ii  openmediavault-omvextrasorg        0.6.25                         all          OMV-Extras.org Package Repositories for OpenMediaVault
ii  openmediavault-transmissionbt      0.5.18                         all          OpenMediaVault Transmission (BitTorrent client) plugin
iU  openmediavault-usbbackup           1.0.2                          all          OpenMediaVault USB/eSATA backup plugin
root@chaos:~# ls -al /etc/nginx/sites-enabled/
total 8
drwxr-xr-x 2 root root 4096 Oct 16 10:02 .
drwxr-xr-x 6 root root 4096 Oct 16 10:02 ..
lrwxrwxrwx 1 root root   34 Oct 16 10:02 default -> /etc/nginx/sites-available/default

Alles anzeigen

ryecoaaron · 16. Oktober 2014

OMV didn't finish installing. What is the output of: apt-get -f install

cliaze · 16. Oktober 2014

Running the command brings me to a Postfix configuration window;

Code

Postfix Configuration ├───────────────────────────┐                                            
                                            │ Please select the mail server configuration type that best meets your needs.  │                                            
                                            │                                                                               │                                            
                                            │  No configuration:                                                            │                                            
                                            │   Should be chosen to leave the current configuration unchanged.              │                                            
                                            │  Internet site:                                                               │                                            
                                            │   Mail is sent and received directly using SMTP.                              │                                            
                                            │  Internet with smarthost:                                                     │                                            
                                            │   Mail is received directly using SMTP or by running a utility such           │                                            
                                            │   as fetchmail. Outgoing mail is sent using a smarthost.                      │                                            
                                            │  Satellite system:                                                            │                                            
                                            │   All mail is sent to another machine, called a 'smarthost', for delivery.    │                                            
                                            │  Local only:                                                                  │                                            
                                            │   The only delivered mail is the mail for local users. There is no network.   │                                            
                                            │                                                                               │                                            
                                            │ General type of mail configuration:                                           │                                            
                                            │                                                                               │                                            
                                            │                            No configuration                                   │                                            
                                            │                            Internet Site                                      │                                            
                                            │                            Internet with smarthost                            │                                            
                                            │                            Satellite system                                   │                                            
                                            │                            Local only                                         │                                            
                                            │                                                                               │                                            
                                            │                                                                               │                                            
                                            │                     <Ok>                         <Cancel>

Alles anzeigen

Will I need to set this up manually so that the install completes? Assume I choose No Configuration to keep the current config?

ryecoaaron · 16. Oktober 2014

Just pick the defaults. It really doesn't matter because OMV will re-write the config files.

cliaze · 16. Oktober 2014

Hi,

I've the selected all the default options as advised but the GUI still wouldn't work. Since then I have rebooted and this has restored the GUI. However My data drive doesn't appear to be mounting automatically, and when I do mount it my SMB/CIFS are not working. I can see that there is data on the drive as when it is mounted half of the storage is used. However if I

Code

SSH root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# ls

there doesn't appear to be any data?

ryecoaaron · 16. Oktober 2014

What is the output of:

cat /etc/fstab
blkid
mount

cliaze · 16. Oktober 2014

Heres the output;

Code

root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=83b9647d-fe9c-4e43-b15d-81a92e8d1f7e /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=ae2eeb46-aae6-41b5-a38e-324181e4f033 none            swap    sw              0       0
# /dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0
UUID=e11d11dd-7124-41f2-81e3-1e3470fdf295       /media/usb0     auto    rw,user,noauto  0       0
tmpfs           /tmp            tmpfs   defaults        0       0
# >>> [openmediavault]
# <<< [openmediavault]
root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# blkid
/dev/sda1: UUID="83b9647d-fe9c-4e43-b15d-81a92e8d1f7e" TYPE="ext4" 
/dev/sda5: UUID="ae2eeb46-aae6-41b5-a38e-324181e4f033" TYPE="swap" 
/dev/sdb1: UUID="e11d11dd-7124-41f2-81e3-1e3470fdf295" TYPE="ext4" 
root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=239508,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=192948k,mode=755)
/dev/disk/by-uuid/83b9647d-fe9c-4e43-b15d-81a92e8d1f7e on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=1139140k)
tmpfs on /tmp type tmpfs (rw,relatime)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)
/dev/sdb1 on /media/usb0 type ext4 (rw,nosuid,nodev,noexec,relatime,user_xattr,barrier=1,data=ordered)
root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295#

Alles anzeigen

ryecoaaron · 16. Oktober 2014

Ok. Now:

omv-mkconf fstab
cat /etc/fstab

cliaze · 16. Oktober 2014

As requested;

Code

root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# omv-mkconf fstab
root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=83b9647d-fe9c-4e43-b15d-81a92e8d1f7e /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=ae2eeb46-aae6-41b5-a38e-324181e4f033 none            swap    sw              0       0
# /dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0
UUID=e11d11dd-7124-41f2-81e3-1e3470fdf295       /media/usb0     auto    rw,user,noauto  0       0
tmpfs           /tmp            tmpfs   defaults        0       0
# >>> [openmediavault]
UUID=e11d11dd-7124-41f2-81e3-1e3470fdf295 /media/e11d11dd-7124-41f2-81e3-1e3470fdf295 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
# <<< [openmediavault]
root@chaos:/media/e11d11dd-7124-41f2-81e3-1e3470fdf295#

Alles anzeigen

ryecoaaron · 16. Oktober 2014

Now:

mount -a

or reboot and you should be back to normal.

cliaze · 16. Oktober 2014

Thanks ryecoaaron for all your help. I can now see these over SSH. However these are still not showing when connecting to the shares. Is it best to recreate the shares and test? ideally it would be best to fix the existing shares but at least the data is now accessible.

Edit; I have used SSH as my user rather than root and can see the files.

ryecoaaron · 16. Oktober 2014

So, is it fixed?

cliaze · 16. Oktober 2014

Hi ryecoaaron, I restarted the services and now the shares appear to be working correct so looks like you fixed the issue and the service just needed restarting. Thank you for all your help!

ryecoaaron · 16. Oktober 2014

Great

Welcome to nginx after upgrade

Jetzt mitmachen!

Tags