Hello i have fresh install omv on my arm device,i have problem to mount second partition
if i try to mount sda2 i have error
Hello i have fresh install omv on my arm device,i have problem to mount second partition
if i try to mount sda2 i have error
Did you create a filesystem on that partition? If so what filesystem did you use?
i try mk2fs ext3 , ext4 this same results like as a screen. then i format this partition on a linux PC not results
Try this via CLI: mkdir /tmp/mount1 && mount /dev/sda2 /tmp/mount1 and report back if that works.
Greetings
David
Okay... then unmount it again please via umount /tmp/mount1.
Apply configuration changes in the WebGUI please and reboot your device. Then please show me the outpug of cat /etc/fstab
Greetings
David
[root@OXNAS:~]$.cat /etc/fstab
# UNCONFIGURED FSTAB FOR BASE SYSTEM
tmpfs /tmp tmpfs defaults 0 0
# >>> [openmediavault]
UUID=415cbeb4-b440-4b0b-b327-8ae646306044 /media/415cbeb4-b440-4b0b-b327-8ae646306044 ext3 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
# <<< [openmediavault]
I restart device and i unable to mount from webgui
LOL i TRY !!
tr: write error: Broken pipe
tr: write error
ATTENTION - Your system info will be provided to the OpenMediaVault forum moderators - forums.openmediavault.org.
your log ID is: cyhvYJC4, please refer to this log ID in your posts.
Creating sysinfo file...
run-parts: /usr/share/openmediavault/sysinfo/modules.d/20-interfaces exited with return code 75
FATAL: Module ip_tables not found.
iptables v1.4.14: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip6_tables not found.
ip6tables v1.4.14: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your krnel needs to be upgraded.
Alles anzeigen
blkid ?
Greetings
David
How did you format that drive? Is it still empty?
Greetings
David
59,27mb on a disk but i dont see any data , sorry but im not a expert i use only make2fs and i format this partition on gparted
support log
https://mega.co.nz/#!vBFGkC7B!…g2tevHf8QQE8dSUwjLkGt27tg
Do the following, you don't type the # and anything behind it.
fdisk /dev/sda
p #this will list partitions, remember which "nubmer" sda2 is
d
NUMBER #put in the correct number here, this will delete the partition!
p #verify that the partition was deleted
w #writes new partition table
Then:
Greetings
David
i have problem at start.
.fdisk /dev/sda
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Command (m for help): p
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00008000
Device Boot Start End Blocks Id System
/dev/sda1 1 488397167 244198583+ ee GPT
Alles anzeigen
i dont have here sda2
now i use parted , i remove partition 2 and use dommand mkpartfs ext2 (becose parted create only ext2) now omv system can manage this partition
some time later i try mk2fs ext4 , and not working , mk2fs ext2 Working .....
So, is it solved for you or do you want to have ext4?
Greetings
David
i want working ext4 , i try with ntfs and work too.
What is the blkid outpout with ext4?
Greetings
David
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!