Hello,
I tried to enable IPV6 DHCP via the web interface. Upon clicking apply, the web interface hung but I was still able to access via ssh. I ssh'd in and rebooted, now the system fails to boot with...
Code
Configuring network interfaces...RTNETLINK answers: File exists
Failed to bring up lo.
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/00:0c:29:9e:d4:45
Sending on LPF/eth0/00:0c:29:9e:d4:45
Sending on Socket/fallback
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
Reloading /etc/samba/smb.conf: smbd only.
bound to 192.168.1.15 -- renewal in 7137 seconds
_
Alles anzeigen
It then hangs.
It also fails to boot in recovery mode from GRUB. Any ideas?
Thanks