microNAS with Odroid U3

    • Offizieller Beitrag

    Do you have a mounted data drive?

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Do you mean any storage data ?
    In that case not yet :) They're connected 3 x 32Gb microsd Through USB, 1 through USB-OTG, and one directly in the motherboard (which i can't use as Storage), but they are only connected, not yet formatted nor mounted.
    The only mounted fs is the EMMC flash which has 64Gb and is the root ;).


    Thanks!

    • Offizieller Beitrag

    Once you mount one of those, it will go away.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • I'm happy to notify that now, the microNAS recognizes /dev/mmcblk0 to be addable to RAID5! (maybe it was because of updates or because i've formatted it's fs). :)


    Unfortunately now, the microNAS doesn't start properly and stops booting at second ~5, after
    the following output:

    Code
    device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dn-devel@redhat.com


    I've waited for 6 minutes, but it doesn't proceed - 1. Should i wait more ?
    Using Alt + SysRq + R and then E, terminates all tasks, but it proceeds with NET module (registered protocol family 10 and 31, note: it already initialized other protocols) and Bluetooth initialization (e.g HCI device enabled and such) ( 2. maybe something hanging those?), and goes into the login session.


    Logging and looking at some logs i've found some infos:
    at "boot" log i've found:

    Code
    File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually ... failed!


    under suggested checkfs file i found the following errors:

    Code
    open: No such file or directory
    fsck died with exit status 6


    The only error i get in messages is:
    smsc95xx eth0 device_set_wakeup_enable error -22 several times


    Should i disable any plugin ?
    May i attach any particular log ?


    ThanKs :) !!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!