Compiling V4L-DVB drivers for dvb card

alon24 · 6. Dezember 2014

I have an rtl 2802

When trying to follow instructions from : http://www.linuxtv.org/wiki/in…ll_V4L-DVB_Device_Drivers

I get:

Code

Preparing to compile for kernel version 3.2.0
You appear to have loadable modules turned off in your kernel.  You can
not compile the v4l-dvb drivers, as modules, and use them with a kernel
that has modules disabled.


If you want to compile these drivers into your kernel, you should
use 'make kernel-links' to link the source for these drivers into
your kernel tree.  Then configure and compile the kernel.
make[1]: *** [allyesconfig] Error 255
make[1]: Leaving directory `/root/media_build/v4l'
make: *** [allyesconfig] Error 2
can't select all drivers at ./build line 490.

Alles anzeigen

Can anyone help with this setting?

davidh2k · 9. Dezember 2014

Where is the problem with dooing what it is suggesting to do?

Greetings
David

alon24 · 10. Dezember 2014

So I tried doing what it said:

Code

root@omv:~/media_build# make kernel-links
make -C /root/media_build/v4l kernel-links
make[1]: Entering directory `/root/media_build/v4l'
cd ..;  v4l/scripts/makelinks.sh /lib/modules/3.2.0-4-amd64/source
patching /lib/modules/3.2.0-4-amd64/source...
find: `Documentation': No such file or directory
find: `Documentation': No such file or directory
make[1]: Leaving directory `/root/media_build/v4l'

And still got the same message after

Code

Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
make[2]: Leaving directory `/root/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/3.2.0-4-amd64/build /lib/modules/3.2.0-4-amd64/source 1
Preparing to compile for kernel version 3.2.0
You appear to have loadable modules turned off in your kernel.  You can
not compile the v4l-dvb drivers, as modules, and use them with a kernel
that has modules disabled.


If you want to compile these drivers into your kernel, you should
use 'make kernel-links' to link the source for these drivers into
your kernel tree.  Then configure and compile the kernel.
make[1]: *** [allyesconfig] Error 255
make[1]: Leaving directory `/root/media_build/v4l'
make: *** [allyesconfig] Error 2
can't select all drivers at ./build line 490.
root@omv:~/media_build#

Alles anzeigen

davidh2k · 10. Dezember 2014

https://bbs.archlinux.org/viewtopic.php?id=181110 maybe?

Greetings
David

alon24 · 12. Dezember 2014

i I do not understand what you mean.

I tried doing "./build --main-git" and it does not work, same results.

Code

* Start building *
******************
make -C /root/media_build/v4l allyesconfig
make[1]: Entering directory `/root/media_build/v4l'
make[2]: Entering directory `/root/media_build/linux'
Syncing with dir ../media/
Applying patches for kernel 3.2.0-4-amd64
patch -s -f -N -p1 -i ../backports/api_version.patch
patch -s -f -N -p1 -i ../backports/pr_fmt.patch
patch -s -f -N -p1 -i ../backports/debug.patch
patch -s -f -N -p1 -i ../backports/drx39xxj.patch
patch -s -f -N -p1 -i ../backports/v3.16_netdev.patch
patch -s -f -N -p1 -i ../backports/v3.16_wait_on_bit.patch
patch -s -f -N -p1 -i ../backports/v3.16_void_gpiochip_remove.patch
patch -s -f -N -p1 -i ../backports/v3.11_dev_groups.patch
patch -s -f -N -p1 -i ../backports/v3.10_fw_driver_probe.patch
patch -s -f -N -p1 -i ../backports/v3.10_ir_hix5hd2.patch
patch -s -f -N -p1 -i ../backports/v3.9_pfn_warning.patch
patch -s -f -N -p1 -i ../backports/v3.9_drxj_warnings.patch
patch -s -f -N -p1 -i ../backports/v3.8_config_of.patch
patch -s -f -N -p1 -i ../backports/v3.6_pci_error_handlers.patch
patch -s -f -N -p1 -i ../backports/v3.6_i2c_add_mux_adapter.patch
patch -s -f -N -p1 -i ../backports/v3.4_i2c_add_mux_adapter.patch
patch -s -f -N -p1 -i ../backports/v3.2_devnode_uses_mode_t.patch
patch -s -f -N -p1 -i ../backports/v3.2_alloc_ordered_workqueue.patch
Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
Syncing with dir ../media/
make[2]: Leaving directory `/root/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/3.2.0-4-amd64/build /lib/modules/3.2.0-4-amd64/source 1
Preparing to compile for kernel version 3.2.0
You appear to have loadable modules turned off in your kernel.  You can
not compile the v4l-dvb drivers, as modules, and use them with a kernel
that has modules disabled.


If you want to compile these drivers into your kernel, you should
use 'make kernel-links' to link the source for these drivers into
your kernel tree.  Then configure and compile the kernel.
make[1]: *** [allyesconfig] Error 255
make[1]: Leaving directory `/root/media_build/v4l'
make: *** [allyesconfig] Error 2
can't select all drivers at ./build line 490, <IN> line 4.
root@omv:~/media_build#

Alles anzeigen

Maybe a little more guidence?

And thanks in advance

davidh2k · 12. Dezember 2014

Funny thing, I actually had to install the same driver ( I think its the same ) for my old DVB-S card to test around with vdr. After 4 hours I used this solution (in german, but you should get the idea out of it)

http://wiki.ubuntuusers.de/v4l-dvb

Greetings
David

alon24 · 13. Dezember 2014

so now I am stuck with:

Code

root@omv:~# sudo apt-get install linux-firmware-nonfree
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linux-firmware-nonfree
root@omv:~#

I know I need to add the apturl but:

Code

root@omv:~# sudo apt-get install linux-firmware-nonfree
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linux-firmware-nonfree
root@omv:~# sudo apt-get install apturl
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package apturl is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source


E: Package 'apturl' has no installation candidate
root@omv:~#

Alles anzeigen

So I cannot get this to work on omv latest

davidh2k · 15. Dezember 2014

Maybe because the package name isn't correct:

Code

root@srv001 ~ # apt-cache search firmware-linux-nonfree
firmware-linux-nonfree - Binary firmware for various drivers in the Linux kernel
root@srv001 ~ #

Greetings
David

alon24 · 15. Dezember 2014

Nope still the same issue.

Code

root@omv:~/media_build# make kernel-links
make -C /root/media_build/v4l kernel-links
make[1]: Entering directory `/root/media_build/v4l'
cd ..;  v4l/scripts/makelinks.sh /lib/modules/3.2.0-4-amd64/source
patching /lib/modules/3.2.0-4-amd64/source...
find: `Documentation': No such file or directory
find: `Documentation': No such file or directory
make[1]: Leaving directory `/root/media_build/v4l'
root@omv:~/media_build#

I tried following this link:
http://www.linuxtv.org/wiki/in…raTec_Cinergy_T_USB_RC_HD
Which led me here:

https://github.com/ambrosa/DVB…-3.0.0/blob/master/README

and he said:

Code

(except I usedKBUILD_SRC=/home/[...]/linux-3.2.1 makeinstead ofmake

how do I use KBUILD_SRC (where is the linux - i think 3.2.0 code)

Code

root@omv:~/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0# make
make -C /usr/src/linux-headers-`uname -r` SUBDIRS=/root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0 modules
make[1]: Entering directory `/usr/src/linux-headers-3.2.0-4-amd64'
  CC [M]  /root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/demod_rtl2832.o
In file included from /root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/dvbt_demod_base.h:289:0,
                 from /root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/demod_rtl2832.h:72,
                 from /root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/demod_rtl2832.c:13:
/root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/foundation.h:19:21: fatal error: dvb-usb.h: No such file or directory
compilation terminated.
make[4]: *** [/root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0/demod_rtl2832.o] Error 1
make[3]: *** [_module_/root/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-4-amd64'
make: *** [default] Error 2
root@omv:~/DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0/RTL2832-2.2.2_kernel-3.0.0#

Alles anzeigen

davidh2k · 16. Dezember 2014

Are your kernel headers installed?

Greetings
David

ryecoaaron · 16. Dezember 2014

There is a new button on the Kernel tab of omv-extras that will install the headers for the currently running kernel.

alon24 · 5. Januar 2015

Came back to this, since I just got around for another round on this.
I have all the headers and such, but still the same errors.

I did see :
http://www.solid-run.com/archi…b/viewtopic.php?f=2&t=719

same issue, and they solved it using :

zcat /proc/config.gz > /lib/modules/2.6.32.9-dove-5.4.2/build/.config
(the full scenario is here:
http://davidtordrup.dk/wordpre…ision-tuner-on-the-cubox/
)

which will allow to turn certain modules on, only config.gz (which I confess I do not know what it should do and why it not there) is not tehre.
Anything I can do for this to work?

alon24 · 17. August 2015

Is no one using dvb-t with OMV?

davidh2k · 17. August 2015

Maybe you have better luck in forums specified for this kind of devices.

Greetings
David

Jetzt mitmachen!